Results 1 to 5 of 5

Thread: Del sol door handles

  1. #1
    Certified Gearhead Rsporty's Avatar
    Join Date
    May 2008
    Location
    Douglasville, Ga.
    Age
    52
    Posts
    819
    Rep Power
    16

    Default Del sol door handles

    Anybody know anything about fixing Del sol door handles or have a junk door with the door handle still in tact that I can look at?
    My wife's driver side outside door handle just flops back n forth and won't open the door.
    I took the panel off and nothing looks broken, but I did find a spring laying in the bottom of the door.
    Can't really see very good where the handle is mounted in the door and don't want to take it apart without really knowing how it goes back together.
    Any help would be greatly appreciated.

  2. #2

    Default

    Should be held in by only 2 10mm bolts.
    unclip the rod that attaches to the latch..just flip the cover and pull out.
    Theres a special U shaped clip holding the lock cylinder in and also the handle..Remove the clip and push out the cylinder.
    Then you should be able to remove the handle.

    But I think for older hondas they have spinning rods that attach to the latch..so if so then pull the handle out and just spin until it comes off.

  3. #3
    del sol? 94_teg_ls's Avatar
    Join Date
    Nov 2007
    Location
    stockbridge---- 72.167.163.194----
    Age
    35
    Posts
    1,173
    Rep Power
    18

    Default

    what happens is the round part the spring goes around cracks and the springs fall out ill take a picture to show you
    /sig

  4. #4
    del sol? 94_teg_ls's Avatar
    Join Date
    Nov 2007
    Location
    stockbridge---- 72.167.163.194----
    Age
    35
    Posts
    1,173
    Rep Power
    18

    Default

    there you can super glue it but it only last me 2 times so i bought some spares
    Attached Thumbnails Attached Thumbnails -p060710223525-jpg  
    /sig

  5. #5
    ATLien ATLRoAcH's Avatar
    Join Date
    Mar 2010
    Location
    Northside of ATL
    Age
    38
    Posts
    18
    Rep Power
    0

    Default

    My Del Sol handles work but they're cracked and shitty looking on the inside. I hate the way Honda did the inside door handles on the Sol. I know they're broke from where the previous owner took the door panels off. I nearly broke them more when I took the panels off myself. I wish the Sol handles were the same as the EG Civic's.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!