Results 1 to 38 of 38

Thread: fs: 94' ls integ ls/vtec trades welcome

  1. #1
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default fs: 94' ls integ ls/vtec trades welcome

    i'll try it again hope i got the thread right this time 94' integra ls w/ ls/vtec motor swap. 179k on odometer 2500 on the motor. only drive to work and grocery getter. got a/c no power steering could be install. everything else is fine. no oil leaks.

    asking $6500 obo trades welcome also got a turbo setup for it also no money or time to install right now, will sell for extra money.

    block# 1348230
    vin# request if needed

    Engine:
    -b16a1 head
    -b18a bottom
    -apex 1 headers
    -aebs intake manifold
    -hks hyper full cat back exhaust
    -chipped p28
    -new type r cams
    -new type r oil pump
    -new gsr water pump
    -new timing belt
    -new cam seal
    -new crank seal
    -top line bearing set
    -b&m fuel regulator
    -ls/vtec fittings
    -ls transmission
    -stage 1 exedy clutch

    Suspension:
    -Kyb 4way adj. front and back
    -skunk 2 coilovers
    -16" rota gt3's wrapped w/ kumhos 90% tire tread
    -new wheel bearings on front and back
    -new brakes calipers recently changed 500miles

    Exterior:
    -stock (paint and molding not faded)

    Interior:
    -stock
    -kenwood and jl audion mids speakers
    -rate interior 10/10 black n grey

    pics is big, can't figure how to resize them. any help?
    Attached Images Attached Images
    Last edited by unlimited; 11-18-2005 at 10:47 AM.

  2. #2
    Fuk Who U B!
    Join Date
    Jan 2004
    Location
    Northside B
    Age
    41
    Posts
    3,400
    Rep Power
    25

    Default

    Bump for a Good Looking car.. Just wondering if You would trade GT3 for my MINT SLIPS, no scratches or curbs... with 95% thread.. Let me know!

  3. #3
    Senior Member | IA Veteran quickdodgeŽ's Avatar
    Join Date
    Sep 2001
    Location
    In your soul
    Age
    55
    Posts
    71,805
    Rep Power
    129

    Default

    Open up Microsoft Paint and resize. Later, QD.
    FOR MORE INFO, CLICK THE PIC!!!


  4. #4
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    Quote Originally Posted by quickdodgeŽ
    Open up Microsoft Paint and resize. Later, QD.
    aight qd get to when i get a chance how work w/ micrsoft paint gots to get back to work. Still how to resize it on microsoft paint?

  5. #5
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    took me forever to figure how just to do the pics how i have em on now.

  6. #6
    Senior Member | IA Veteran quickdodgeŽ's Avatar
    Join Date
    Sep 2001
    Location
    In your soul
    Age
    55
    Posts
    71,805
    Rep Power
    129

    Default

    Lolol. Thanks, dude. I am now aware that size is not an issue. I apologize for the trouble, dude. Later, QD.
    FOR MORE INFO, CLICK THE PIC!!!


  7. #7
    Jay G. 1439/2000's Avatar
    Join Date
    Jan 2004
    Location
    Location, Location...
    Posts
    6,375
    Rep Power
    30

    Default

    Ok dont just size them with the arrows. Go to stretch/skew and type in 50 and 50 for vert and horizontal. That way the pictures dont look like shit.

  8. #8
    Insanely Crazy
    Join Date
    May 2005
    Location
    Loganville GA
    Age
    44
    Posts
    409
    Rep Power
    21

    Default

    interested with 1996 Eclipse GST(turbo)?

  9. #9
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bump............

  10. #10
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bump.........

  11. #11
    DC5-R
    Join Date
    Mar 2005
    Location
    Gwinett
    Age
    39
    Posts
    5,747
    Rep Power
    26

    Default

    whats the lowest you would take? PM me

  12. #12
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    mornin bump.....

  13. #13
    ☠gOOn☠ Brian*'s Avatar
    Join Date
    Nov 2005
    Location
    ☠Young Harris☠
    Age
    40
    Posts
    6,809
    Rep Power
    30

    Default

    Huge Bump! and I want to trade!

  14. #14
    ☠gOOn☠ Brian*'s Avatar
    Join Date
    Nov 2005
    Location
    ☠Young Harris☠
    Age
    40
    Posts
    6,809
    Rep Power
    30

    Default

    This is my trade...
    Attached Thumbnails Attached Thumbnails -aaa-jpg   -wheel-jpg  

  15. #15
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bump.......

  16. #16
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bump...bump....bump.

  17. #17
    Certified Gearhead
    Join Date
    Oct 2005
    Location
    lawrenceville and Cartersville
    Age
    38
    Posts
    420
    Rep Power
    0

    Default

    how much for the turbo setup?

  18. #18
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    Quote Originally Posted by 94LSEG
    how much for the turbo setup?
    not selling turbo seperate

  19. #19
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bizumpers..........all day

  20. #20
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    ttt........

  21. #21
    IA Member
    Join Date
    Jan 2004
    Location
    Peachtree City- GA - United States
    Posts
    7
    Rep Power
    0

    Default

    Quote Originally Posted by unlimited
    i'll try it again hope i got the thread right this time 94' integra ls w/ ls/vtec motor swap. 179k on odometer 2500 on the motor. only drive to work and grocery getter. got a/c no power steering could be install. everything else is fine. no oil leaks.

    asking $6500 obo trades welcome also got a turbo setup for it also no money or time to install right now, will sell for extra money.

    block# 1348230
    vin# request if needed

    Engine:
    -b16a1 head
    -b18a bottom
    -apex 1 headers
    -aebs intake manifold
    -hks hyper full cat back exhaust
    -chipped p28
    -new type r cams
    -new type r oil pump
    -new gsr water pump
    -new timing belt
    -new cam seal
    -new crank seal
    -top line bearing set
    -b&m fuel regulator
    -ls/vtec fittings
    -ls transmission
    -stage 1 exedy clutch

    Suspension:
    -Kyb 4way adj. front and back
    -skunk 2 coilovers
    -16" rota gt3's wrapped w/ kumhos 90% tire tread
    -new wheel bearings on front and back
    -new brakes calipers recently changed 500miles

    Exterior:
    -stock (paint and molding not faded)

    Interior:
    -stock
    -kenwood and jl audion mids speakers
    -rate interior 10/10 black n grey

    pics is big, can't figure how to resize them. any help?
    Fathertime99----- I have a fully shaved 1991 crx or a 1995 eclipes GST to trade.

  22. #22
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    Quote Originally Posted by fathertime99
    Fathertime99----- I have a fully shaved 1991 crx or a 1995 eclipes GST to trade.
    pics would help....bump

  23. #23
    Senior Member
    Join Date
    May 2005
    Location
    Southside
    Age
    47
    Posts
    1,268
    Rep Power
    22

    Default

    Interested in selling the GT3's?
    Nopi Drag Racing NHRA Atlanta Dragway March 29/30! > HERE!

  24. #24
    Sleeper.
    Join Date
    Oct 2005
    Age
    41
    Posts
    134
    Rep Power
    21

    Default

    Yo this car is very clean they live down the street from me. I c u finally put a tip on the exhaust. i just crashed my teg 2 days ago i might have to take out a lone for this shit!!!
    Last edited by z0ne_3; 11-23-2005 at 09:10 AM.

  25. #25
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    anotha bump ttt......

  26. #26
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bumps.............or trade for something nice n stock.

  27. #27
    IA Member
    Join Date
    Oct 2005
    Age
    38
    Posts
    16
    Rep Power
    0

    Default

    would you be interested in trading the car+turbo setup for a 1996 240sx ka24de-t?

  28. #28
    IA Member
    Join Date
    Oct 2005
    Age
    38
    Posts
    16
    Rep Power
    0

    Default

    i tried to reply to your pm but it said your inbox was full but ill try and get some pics up as soon as i get a hold of my friends camera

  29. #29
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bumps........alot of flakers

  30. #30
    Exit 47 member #1
    Join Date
    Jul 2005
    Location
    Somewhere in tha south
    Age
    39
    Posts
    1,032
    Rep Power
    22

    Default

    bump for a clean teg.....very interested in the turbo setup...i have a 96 LS that i am really wanting to turbo....pm me if maybe we can work something out or possibly a price...later dude

  31. #31
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    39
    Posts
    621
    Rep Power
    21

    Default

    ill give you $3000 even for the car alone, thats all its worth
    Think about it

  32. #32
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    out of state for vacation............bumps anybody

  33. #33
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    still for sale trades welcome.....

  34. #34
    IA Member
    Join Date
    Jul 2005
    Age
    37
    Posts
    133
    Rep Power
    0

    Default

    wanna part out the turbo kit?

  35. #35
    Certified Gearhead
    Join Date
    Aug 2005
    Age
    39
    Posts
    300
    Rep Power
    21

    Default

    im interetsed but a little to much... if you could come down... mabey we could talk

  36. #36
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    Quote Originally Posted by chasekeaton
    im interetsed but a little to much... if you could come down... mabey we could talk
    its obo........pm me your number

  37. #37
    Certified Gearhead
    Join Date
    Sep 2005
    Age
    45
    Posts
    301
    Rep Power
    21

    Default

    bumps................

  38. #38
    Girls Do It Better!! DC2girl's Avatar
    Join Date
    Dec 2005
    Location
    Look behind you dude!
    Age
    38
    Posts
    315
    Rep Power
    20

    Default

    1999 Honda Civic EX - SOLD

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!