FS: DA Thermal Exhaust, DA axles, Drilled/Slotted Rotors, Rare EG/DC JDM Strut Bars
Updated 1/27/2010
Thermal R&D exhaust - off of a 2 door 1992 Integra - has plenty of scrapes on it - cracked at the resonator - muffler section is still fine - will NOT bolt up to your stock midpipe - will NOT part the axle back (you'll most likely need the flange on the midpipe to even use the axle back) - ideal use is to buy a resonator and get someone with a tig welder to replace it or to just use it for the axle back (either way, you'll need to do some welding unless you already have a Thermal exhaust that needs the muffler replaced) - I measured 2.25" ID - it's a $600 stainless steel exhaust - $250 FIRM
(Click on thumbnails for larger pictures)
Top of muffler (side that faces the car):
Bottom of muffler (side that faces the ground):
bottom of midpipe (side that faces the ground):
Part that is split wide open at the resonator:
top of midpipe (side that faces the car):
AEM front brake pads - part number 26-125 (Will fit 90-93 Integra as well as the other applications listed on the box in the picture) - $45
NEW 90-93 Integra brake booster - $100
Slightly used 90-93 Integra 15/16" NISSIN OEM master cylinder - NON ABS - (still fairly new since the reservoir has not yellowed) - $40
Tenzo R front strut bar - I think it's for an EG/DC - $45
Rare oldschool JDM GAB and FEEL'S front strut bars - I think they fit EG/DC/EK - $80 each
90-01 Integra / 99-00 Civic SI drilled and slotted rotors - $SOLD!
90-93 Integra axles - $SOLD!
+Reps for bumps and sales
-Reps for lowballing
Reply With Quote