Results 1 to 23 of 23

Thread: F/S 1989 Conquest TSI *pics*

  1. #1
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default F/S 1989 Conquest TSI *pics*

    Ok I had a thread earlier about selling my car...I have been putting it off becasue I really dont want to but I have to...... here are the pics, once again i have a ton of new parts on it. if it doent sell tehn i will just keep it but in reality trying to start being a full time musician/baby on teh way so gotta save some cash.

    new walbro 255 lph fuel pump
    Rebuilt rear calipers
    greddy electronic boost controller
    greddy turbo timer
    Autotechnic gauges
    NR auto Gauge faces ( black with red lettering)
    2 new injectors
    new heater core
    Kenwood CD/mp3 player ( unless I sell it seperately first)
    new steering coupler
    replaced steering gear...... has tight steering
    The original console wasnt perfect so I replaced that with one that is.
    OEM rebuilt Alternator
    new Power steering pump

    The passenger seat is the only part of the interior that needs work. everything else is perfect. I did paint the wheels on one side black with spray paint just to see what it would look like...it comes right off. * the engine is out of the car, but ran fine. needs timing chain tensioner/kit.

    here ya go.... *sigh* $2500 firm
    Attached Thumbnails Attached Thumbnails -im001022-jpg   -im001023-jpg   -im001024-jpg   -im001025-jpg   -im001026-jpg  

    1989 Starion/Conquest
    1995 Land Rover Disco

  2. #2
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    21

    Default

    man
    beautiful car
    still has the air dam and it doesn't look damaged in the pics...
    have you posted this on starquest.com?

    Joe

  3. #3
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    no I Havent, i owe a dude $50 on there....but I dont even have $50 to spare. plus they will onlt want to give me $900 becasue they are all cheap bastards
    1989 Starion/Conquest
    1995 Land Rover Disco

  4. #4
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    21

    Default

    Quote Originally Posted by Scooby Pilot
    no I Havent, i owe a dude $50 on there....but I dont even have $50 to spare. plus they will onlt want to give me $900 becasue they are all cheap bastards

    LOL...you're so right about it...

    kinda like the lowballers here on this site
    joe

  5. #5
    Who Needs Pistons Salty12's Avatar
    Join Date
    Nov 2002
    Location
    Kennesaw, Ga
    Age
    44
    Posts
    717
    Rep Power
    22

    Default

    good luck Shawn.. hope you get what you need.

  6. #6
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    Thanks man, yea I honestly hope it doesnt sell, but I had to satisfy the "responsible thing to do" before I went back to my normal self. haha

    so if it doesnt sell i will prolly be more excited than if it did lol
    1989 Starion/Conquest
    1995 Land Rover Disco

  7. #7
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    21

    Default

    does it have the hard pipes?
    any underhood shots?
    what type of Bov?
    Joe

  8. #8
    ⎝⏠⏝⏠⎠ RandomGuy's Avatar
    Join Date
    Jan 2004
    Location
    GA
    Posts
    18,981
    Rep Power
    150

    Default

    good luck on the boat

  9. #9
    IA Member
    Join Date
    Oct 2005
    Age
    44
    Posts
    15
    Rep Power
    0

    Default

    nice...always wanted one!

  10. #10
    ALL CAPS JITB's Avatar
    Join Date
    Nov 2002
    Location
    Lithonia
    Posts
    20,772
    Rep Power
    57

    Default

    willing to part ot the boost controller and turbo timer?

    nice car...

  11. #11
    look here, bish Stormhammer's Avatar
    Join Date
    Jul 2005
    Location
    Lawrenceville, GA
    Age
    36
    Posts
    9,288
    Rep Power
    33

    Default

    aw man - good luck with the sale

    ... hope it doesnt sell lol

  12. #12
    ⎝⏠⏝⏠⎠ RandomGuy's Avatar
    Join Date
    Jan 2004
    Location
    GA
    Posts
    18,981
    Rep Power
    150

    Default

    wanna part those injectors, ill give you mines

  13. #13
    IA Original Slinger DC2NR's Avatar
    Join Date
    Jul 2005
    Location
    Out in the Boonies
    Age
    37
    Posts
    4,361
    Rep Power
    24

    Default

    thats one mean machine ^_^
    VTECH ... Making phones since 1994.

    Looking for Integra Sedan (DB7/8) parts <--clickable

    Q:Nitrous on stock LS high mileage. Too risky?
    A:IMO nos is like steroids and giving steroids to a grandma doesnt sound all that good to me!

  14. #14
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    21

    Default

    Quote Originally Posted by Scooby Pilot
    New Heater Core
    Greddy Boost controller
    Greddy Turbo timer
    Bain industries short shifter
    Walbro 255lph fuel pump
    rebuilt rear brake calipers
    new Steering coupler
    replaced Steering gear box to ensure tight steering.

    While putting in the heater core I replaced all of the seals for the HVAC vents. The interior is in excellent shape except fo rthe passenger seat (go figure).

    I did pull the engine with the idea of building it. the motor is still out of the car and still assembled. The only piece I lack is the factory turbo (which is a 12A and worthless anyway...any mistsu turbo will bolt right up) The engine ran pretty well before I pulled it. I just rebuilt the throttle body and put in two new injectors and a chrome fuel pressure regulator. However if you do any power modifications up to 300hp it is recommended to convert to MPI. The engine only needs a timing chain tensioner as required by general maintenance anyway if you decided to just drop teh motor back in.


    Paint is blue with the decals. 5 sp transmission shifts smooth and easily.
    some info you forgot to mention from you last post

    man I want this car..only if it was running & assembled...

    Joe

  15. #15
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    Im not parting it.

    i ran fine when I pulled it, I can get some under hood shots. I pulled the motor to build it to how I wanted it. I can put it back together. the only thing I dont have is the turbo, I sold it lol, but it was a 12a.... more lieka hair dryer than a turbo really. doesnt have hardpipes and these cars dont have BOV's factory. This was was dead stock when I bought it.
    1989 Starion/Conquest
    1995 Land Rover Disco

  16. #16
    Drifter/Kneedragger
    Join Date
    Nov 2002
    Location
    Buford, GA, USA
    Posts
    6,528
    Rep Power
    29

    Default

    Quote Originally Posted by Smokin_Joes_2kSi
    some info you forgot to mention from you last post

    man I want this car..only if it was running & assembled...

    Joe

    they are honestly pretty easy to work on. if the engine is out it's just a great excuse to clean up the engine bay of all the extraneous crap that mitsu decided to throw in there to fill space

  17. #17
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    21

    Default

    Quote Originally Posted by HiPSI
    they are honestly pretty easy to work on. if the engine is out it's just a great excuse to clean up the engine bay of all the extraneous crap that mitsu decided to throw in there to fill space

    except for all of those damn vaccum lines...
    joe

  18. #18
    dsmwookie
    Join Date
    Nov 2003
    Location
    August Ga US
    Age
    40
    Posts
    44
    Rep Power
    0

    Default

    Well post it on ga.dsm.org their some quest/starion guys on their. Doesn't it seem a little high though with no motor in the car?
    ?Fuck with the best die like the rest"

  19. #19
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    hmmm look at all of the parts I have put on it and no its deosnt seem high. Takes 2-3 hours to put the motor in. no biggie.... i also dont REALLY want it to sell.




    Quote Originally Posted by FMX
    Well post it on ga.dsm.org their some quest/starion guys on their. Doesn't it seem a little high though with no motor in the car?
    1989 Starion/Conquest
    1995 Land Rover Disco

  20. #20
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    21

    Default

    what it needs while you have that motor out is a 4G63 swap
    joe

  21. #21
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    Nah I dont want to swap it... I am kind of purist in certian ways... I can make a bit of power from the 2.6 and mak eit live no problem.....

    However I may not be able to keep it reardless... Best Buy is yanking my gf around about putting her back to work...they are discriminating against her becasue she is pregnant. SO

    MAKE OFFER!


    (dont "F" around with me i dont want to waste my time, in other words no $500 offers)
    Last edited by Scooby Pilot; 10-17-2005 at 03:32 PM.
    1989 Starion/Conquest
    1995 Land Rover Disco

  22. #22
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    Yep just make an offer....
    1989 Starion/Conquest
    1995 Land Rover Disco

  23. #23
    you're my boy blue! Scooby Pilot's Avatar
    Join Date
    Apr 2003
    Location
    Atlanta/Athens GA
    Posts
    240
    Rep Power
    22

    Default

    anyone..... anyone...... make offer
    1989 Starion/Conquest
    1995 Land Rover Disco

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!