Results 1 to 26 of 26

Thread: H2B Adaptor plate H22 F22 into EG

Hybrid View

  1. 07-28-2009, 04:19 PM #1
    spooled
    spooled is offline
    SickSwapp-eR spooled's Avatar
    Join Date
    Jul 2005
    Location
    ATL baby
    Age
    46
    Posts
    364
    Rep Power
    21

    Default H2B Adaptor plate H22 F22 into EG

    Laser machined adaptor plate and crank spacer for the H22B or F22A4/6 swap into an EG.

    $200 obo Sorry no trades!

    *** PM me if you have any questions. *** You can also text me at 404-438-8839. I can only send/receive texts.

    Material is High tensile strength Mild Steel on both. Just to mention a few things, you need:

    B16 transmission
    B16 flywheel
    Mounting hardware
    b16 trans mounts, rear engine/trans mount
    Half shaft mount (I dont have another one but I can make you one easily for a small fee of course ).

    Some minor machining required to get the driver's side axle to work, so do your research. Pm me if you have any questions. I made an extra for my swap I dont need. I have one for a H2D or F2D swap also (H22, F22 engine D series trans). I only have one but I can make at least one other for the D series transmission if interested.





    Sick Swapp-eR

    Reply With Quote Reply With Quote
  2. 07-28-2009, 04:55 PM #2
    BIGWADE
    BIGWADE is offline
    Rockin The DB1 BIGWADE's Avatar
    Join Date
    Oct 2008
    Location
    Aragon, GA
    Posts
    1,333
    Rep Power
    19

    Default

    bump good price!!!


    DTF?KR3W!
    Reply With Quote Reply With Quote
  3. 07-28-2009, 10:15 PM #3
    Drummerboy
    Drummerboy is offline
    BA8 Squad member #1 Drummerboy's Avatar
    Join Date
    Apr 2008
    Location
    Marietta
    Age
    34
    Posts
    4,202
    Rep Power
    25

    Default

    hmm, use this as a bump, but i've seen these around. the whole H2B and what not, but...what is it? engine to tranny matching or head to block?


    My Build Thread
    http://www.importatlanta.com/forums/...e-build-thread
    Reply With Quote Reply With Quote
  4. 07-28-2009, 10:29 PM #4
    NoWAyItZTOMmY
    NoWAyItZTOMmY is offline
    TOO KEWL NoWAyItZTOMmY's Avatar
    Join Date
    Jul 2006
    Location
    where ever my car drives me to
    Age
    33
    Posts
    2,451
    Rep Power
    23

    Default

    engine to tranny
    Reply With Quote Reply With Quote
  5. 07-29-2009, 01:51 AM #5
    J-ROCK
    J-ROCK is offline
    rolla rollin
    Join Date
    Aug 2007
    Location
    middle GA
    Age
    34
    Posts
    4,818
    Rep Power
    25

    Default

    i may be interested in this! let me see what my funds look like when i get paid and ill let you know
    Reply With Quote Reply With Quote
  6. 07-30-2009, 10:22 AM #6
    spooled
    spooled is offline
    SickSwapp-eR spooled's Avatar
    Join Date
    Jul 2005
    Location
    ATL baby
    Age
    46
    Posts
    364
    Rep Power
    21

    Default

    thanks all.

    bump...h22 f22 engines to b16 trans adaptor
    Sick Swapp-eR

    Reply With Quote Reply With Quote
  7. 07-30-2009, 10:54 AM #7
    TheChosenOne
    TheChosenOne is offline
    Afghan Goober! TheChosenOne's Avatar
    Join Date
    Sep 2006
    Location
    my momma's house
    Age
    37
    Posts
    2,206
    Rep Power
    23

    Default

    So you made this, or is this from either the QSD or EVO kit?
    Trend settin'
    Reply With Quote Reply With Quote
  8. 07-30-2009, 02:43 PM #8
    spooled
    spooled is offline
    SickSwapp-eR spooled's Avatar
    Join Date
    Jul 2005
    Location
    ATL baby
    Age
    46
    Posts
    364
    Rep Power
    21

    Default

    Quote Originally Posted by TheChosenOne
    So you made this, or is this from either the QSD or EVO kit?
    I made the adapter myself. I used cad/cam software and an industrial laser i repair locally for a friend of mine. I instruct on, install and repair industrial lasers as my profession. I have a friend with a shop and he let me use his h22 and gsr transmission to test the fit of the plate.

    I'm using mine for an f22 swap into my coupe with gsr transmission.
    Sick Swapp-eR

    Reply With Quote Reply With Quote
  9. 07-30-2009, 12:04 PM #9
    Turbodude06
    Turbodude06 is offline
    Let the Motha burn Turbodude06's Avatar
    Join Date
    Jan 2006
    Location
    Where Am I
    Age
    37
    Posts
    4,403
    Rep Power
    25

    Default

    Good deal
    -If You Own A Honda And Say "Headers", Go Jump Off Bridge...........

    Reply With Quote Reply With Quote
  10. 07-30-2009, 03:11 PM #10
    xdavidscenex
    xdavidscenex is offline
    Jones Style xdavidscenex's Avatar
    Join Date
    Oct 2006
    Location
    Warner robins ,Ga
    Age
    35
    Posts
    2,619
    Rep Power
    23

    Default

    pm'd.
    Reply With Quote Reply With Quote
  11. 08-02-2009, 10:00 PM #11
    Motivation
    Motivation is offline
    Respect is EARNED Motivation's Avatar
    Join Date
    Feb 2008
    Location
    North Augusta, SC
    Age
    38
    Posts
    8,786
    Rep Power
    32

    Default

    Good seller! Thanks man.
    Back to being stock and slow
    Reply With Quote Reply With Quote
  12. 08-03-2009, 09:41 AM #12
    ls-r teg
    ls-r teg is offline
    slingshot sales ceo. ls-r teg's Avatar
    Join Date
    May 2007
    Location
    gwinnett
    Age
    37
    Posts
    2,040
    Rep Power
    23

    Default

    since you make ur own kits wanna make me a b2k kit
    Quote Originally Posted by civic gsr View Post
    STILLHAVE THAT PENIS ?????
    They should have never gave u niggggas vtec
    Reply With Quote Reply With Quote
  13. 08-03-2009, 10:32 AM #13
    Turbodude06
    Turbodude06 is offline
    Let the Motha burn Turbodude06's Avatar
    Join Date
    Jan 2006
    Location
    Where Am I
    Age
    37
    Posts
    4,403
    Rep Power
    25

    Default

    Quote Originally Posted by ls-r teg
    since you make ur own kits wanna make me a b2k kit
    b2K? would that even work there reversed from each other?
    -If You Own A Honda And Say "Headers", Go Jump Off Bridge...........

    Reply With Quote Reply With Quote
  14. 08-03-2009, 11:45 PM #14
    ls-r teg
    ls-r teg is offline
    slingshot sales ceo. ls-r teg's Avatar
    Join Date
    May 2007
    Location
    gwinnett
    Age
    37
    Posts
    2,040
    Rep Power
    23

    Default

    Quote Originally Posted by Turbodude06
    b2K? would that even work there reversed from each other?
    it was a joke dude
    Quote Originally Posted by civic gsr View Post
    STILLHAVE THAT PENIS ?????
    They should have never gave u niggggas vtec
    Reply With Quote Reply With Quote
  15. 08-10-2009, 02:28 PM #15
    cowartbrian
    cowartbrian is offline
    The Master Baiter
    Join Date
    Jul 2009
    Location
    Canton Ga
    Age
    38
    Posts
    5
    Rep Power
    0

    Default

    bump
    Reply With Quote Reply With Quote
  16. 08-19-2009, 02:29 PM #16
    UmbrellaHead
    UmbrellaHead is offline
    Unknown
    Join Date
    Aug 2009
    Age
    39
    Posts
    2
    Rep Power
    0

    Thumbs up

    I am interested can you send me info on a PM I have sent you one already.
    Reply With Quote Reply With Quote
  17. 09-12-2009, 07:57 AM #17
    spooled
    spooled is offline
    SickSwapp-eR spooled's Avatar
    Join Date
    Jul 2005
    Location
    ATL baby
    Age
    46
    Posts
    364
    Rep Power
    21

    Default

    I have 2 more sets available of the H2B adapter and flywheel spacer. Txt me at 404-438-8839

    Thanks.
    Sick Swapp-eR

    Reply With Quote Reply With Quote
  18. 09-12-2009, 08:05 AM #18
    AyO Deebo
    AyO Deebo is offline
    Certified Gearhead
    Join Date
    Aug 2009
    Location
    Lawrenceville, Georgia, United States
    Age
    36
    Posts
    304
    Rep Power
    17

    Default

    dam if i was to go h2b i would jump on this and lol @ the b2k BUMP BUMP BUMP
    Reply With Quote Reply With Quote
  19. 09-12-2009, 08:18 AM #19
    Jenson
    Jenson is offline
    Certified Gearhead
    Join Date
    Oct 2005
    Age
    44
    Posts
    347
    Rep Power
    21

    Default

    Just curious why in the world you made the pate out of steel??? So heavy. Have you found a good source for the flywheel bolts or adaptor plate bolts? Im just about to the point of calling ARP and having them make me some flywheel bolts...or making them myself. I'm making my own kit as well. And FWIW, that flywheel spacer needs some more machining to work properly.
    Reply With Quote Reply With Quote
  20. 09-12-2009, 08:33 AM #20
    NoWAyItZTOMmY
    NoWAyItZTOMmY is offline
    TOO KEWL NoWAyItZTOMmY's Avatar
    Join Date
    Jul 2006
    Location
    where ever my car drives me to
    Age
    33
    Posts
    2,451
    Rep Power
    23

    Default

    ^ you should be able to buy the bolts from ARP.
    Reply With Quote Reply With Quote
  21. 09-12-2009, 08:46 AM #21
    Jenson
    Jenson is offline
    Certified Gearhead
    Join Date
    Oct 2005
    Age
    44
    Posts
    347
    Rep Power
    21

    Default

    ^Thats what I figured, I'll give them a call monday. The C/S head plate bolts are just as hard to find...
    Reply With Quote Reply With Quote
  22. 09-14-2009, 07:43 AM #22
    spooled
    spooled is offline
    SickSwapp-eR spooled's Avatar
    Join Date
    Jul 2005
    Location
    ATL baby
    Age
    46
    Posts
    364
    Rep Power
    21

    Default

    Bump H2B steel adapter plate and crank spacer $200.




    Thanks.
    Sick Swapp-eR

    Reply With Quote Reply With Quote
  23. 09-14-2009, 07:47 AM #23
    spooled
    spooled is offline
    SickSwapp-eR spooled's Avatar
    Join Date
    Jul 2005
    Location
    ATL baby
    Age
    46
    Posts
    364
    Rep Power
    21

    Default

    bump
    Sick Swapp-eR

    Reply With Quote Reply With Quote
  24. 02-10-2010, 10:05 PM #24
    UmbrellaHead
    UmbrellaHead is offline
    Unknown
    Join Date
    Aug 2009
    Age
    39
    Posts
    2
    Rep Power
    0

    Talking

    Are these still available I have been out of the country and need one now that I am back??

    CAM
    Reply With Quote Reply With Quote
  25. 02-28-2010, 12:56 PM #25
    jesus bonill
    jesus bonill is offline
    Alpha Kenny Body jesus bonill's Avatar
    Join Date
    Jun 2008
    Location
    ATL, GA
    Age
    34
    Posts
    516
    Rep Power
    18

    Default

    BUMP,
    do you still have the adapter plate??
    my buddy needs it, ill come pick it up if you still have it...
    Reply With Quote Reply With Quote
  26. 02-28-2010, 11:38 PM #26
    Motivation
    Motivation is offline
    Respect is EARNED Motivation's Avatar
    Join Date
    Feb 2008
    Location
    North Augusta, SC
    Age
    38
    Posts
    8,786
    Rep Power
    32

    Default

    ^^^ Buy mine. It is THE EXACT ONE that is in this guy's thread... I bought it from him.
    Back to being stock and slow
    Reply With Quote Reply With Quote
« <<::FS/FT: JRSC For D-series::>> | Greddy/Trust E-manage blue FS/Trade »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!