Results 1 to 34 of 34

Thread: K24 Longblock Motor

  1. #1
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default K24 Longblock Motor

    I have a k24 long motor. The motor is out of a 07" crv. The motor has a blown head gasket. The motor also comes with the wire harness and the battery cable harness as well.. all the sensors for the most part are there . The top half of the stock header comes with it too. It comes with the spark plug valve cover and the injectors and all..

    PRICE WITH BLOWN HEAD GASKET IS 575 THANKS..
    678-644-3336!! You can pm me or give me a call.. it does not matter!!
    Need it gone!! People holla at me..
    I also have a b20 longblock.. that i am trying to get off my hands.. don't have pics up yet.. but you can call me on that one!!! The motor also has a blown head gasket but i am going to put a new head gasket on it within the week so the price would be 500 bucks!!
    K24Z1
    Block Code= 4015957

    I am open for trades(the stuff i need):
    Hondata S300 with boost by gears
    Tial 50 mm bov
    Full coilovers(for integra)
    Sc61 turbo(4 bolt downpipe)
    Skunk 2 pro series all motor stage 1

    PM ME FOR MORE INFO ABOUT IT
    Attached Thumbnails Attached Thumbnails -rsz_k24_motor_2nd_001-jpg   -rsz_k24_motor_2nd_006-jpg   -k24-motor-2nd-018-jpg   -rsz_k24_motor_2nd_004-jpg   -k24-motor-2nd-006-jpg  

    Last edited by civic-r11; 08-31-2009 at 12:01 PM. Reason: Price DROP

  2. #2
    ballin on a budget hondalover00's Avatar
    Join Date
    Jun 2008
    Location
    ga
    Age
    36
    Posts
    1,252
    Rep Power
    19

    Default

    pretty good price.....good deal

  3. #3
    BEESH!!! jville95's Avatar
    Join Date
    Mar 2008
    Location
    My house in the middle of my street
    Posts
    138
    Rep Power
    18

    Default

    ^ bump
    I was here.

  4. #4
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    thanks guys.. lets see if somebody is going to buy it..

  5. #5
    Senior Member | IA Veteran
    Join Date
    Jul 2007
    Location
    Not on IA Anymore !!!!!
    Posts
    17,879
    Rep Power
    0

    Default

    price is high I can buy these in running low miles for around 600-750 ...

    from most JDM engine exchange companies , and salvage yards...But best of luck
    Last edited by Tech5; 07-14-2009 at 11:57 PM.

  6. #6
    IA Member
    Join Date
    Dec 2008
    Location
    kathleen GA
    Age
    41
    Posts
    138
    Rep Power
    17

    Default

    bump for a good price
    91 integra with a jdm b20 swap

  7. #7
    Senior Member
    Join Date
    Jan 2008
    Age
    43
    Posts
    2,964
    Rep Power
    20

    Default

    gl
    /Oo ___A___ oO\
    |=_/_______\_=|



  8. #8
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    bump.. i think that the price is ok.. but i am a reasonable person..

  9. #9
    I heart fat girls tinkolby_25's Avatar
    Join Date
    Jun 2008
    Location
    Jacksonville/Centre, AL
    Age
    37
    Posts
    1,161
    Rep Power
    19

    Default

    mileage?

  10. #10
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    It has 32,000 miles

  11. #11
    Senior Member | IA Veteran
    Join Date
    Jul 2007
    Location
    Not on IA Anymore !!!!!
    Posts
    17,879
    Rep Power
    0

    Default

    Quote Originally Posted by civic-r11
    bump.. i think that the price is ok.. but i am a reasonable person..
    You got my reps...For staying positive with your comment ....Good luck

  12. #12
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    Quote Originally Posted by Tech5
    You got my reps...For staying positive with your comment ....Good luck
    Thanks a lot.. I am not on this site to rip people off.. This is the price that i think is reasonable.. but if it is too high.. i could go down in the price.. but the last time i sold a k24 motor on here i sold it for about that price.. that is the only reason why i set it too that amount.

    THANKS Tech 5

  13. #13
    Speical R
    Join Date
    Dec 2008
    Age
    92
    Posts
    341
    Rep Power
    17

    Default

    clean your PM

  14. #14
    IA Member
    Join Date
    Dec 2008
    Location
    kathleen GA
    Age
    41
    Posts
    138
    Rep Power
    17

    Default

    glws
    91 integra with a jdm b20 swap

  15. #15
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Wink

    Quote Originally Posted by tofu-eg
    clean your PM
    i did.. sry for not doing it earlier.. i was moving earlier on today.. it is all cleared now.. and pm me away

  16. #16
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    i guess nobody wants to go k series!!!

  17. #17
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    yo

  18. #18
    Certified Gearhead
    Join Date
    Aug 2007
    Location
    Lawrenceville, GA
    Age
    39
    Posts
    261
    Rep Power
    19

    Default

    can i buy the sparkplug cover?

  19. #19
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    no. goes with motor

  20. #20
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    BUMP

  21. #21
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    people get this out of my hands

  22. #22
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    Bump. Somebody get this off my hands

  23. #23
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    BUMP.. Dropped price to 600 bucks.. somebody come and get it..

  24. #24
    slingshot sales ceo. ls-r teg's Avatar
    Join Date
    May 2007
    Location
    gwinnett
    Age
    37
    Posts
    2,040
    Rep Power
    23

    Default

    fag
    Quote Originally Posted by civic gsr View Post
    STILLHAVE THAT PENIS ?????
    They should have never gave u niggggas vtec

  25. #25
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Angry

    Quote Originally Posted by ls-r teg
    fag
    whatever.. no thread hatin... i don't like u and you don't like me.. stop talking about me. if you do not have anything to say.. don't say anything at all..

  26. #26
    209 FlatbaCkGsR's Avatar
    Join Date
    Jan 2002
    Location
    Ga
    Age
    43
    Posts
    459
    Rep Power
    33

    Default

    how much you letting the b20 for is it jdm or usdm

  27. #27
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    Quote Originally Posted by R.E.D.S.
    how much you letting the b20 for is it jdm or usdm
    it is a usdm.. and the price is 400..

  28. #28
    wherever God leads geoff's Avatar
    Join Date
    May 2009
    Location
    gwinnett
    Age
    37
    Posts
    1,191
    Rep Power
    18

    Default

    i have a kseries into ek adapter harness from hasport for 350obo and kpro for 900+ stock ecu to go for who ever buys this
    riding for God crew member #1


    IA Domestic Alliance

  29. #29
    Super H8ter Starrfire's Avatar
    Join Date
    Jul 2008
    Age
    39
    Posts
    2,009
    Rep Power
    21

    Default

    Nice flip flops. Like the tourist look with socks?

  30. #30
    Light Tuned
    Join Date
    Dec 2007
    Age
    39
    Posts
    334
    Rep Power
    18

    Default

    whats up with the B20??

  31. #31
    ......
    Join Date
    Jan 2009
    Location
    warner robins
    Age
    35
    Posts
    31
    Rep Power
    0

    Default

    Quote Originally Posted by Tech5
    price is high I can buy these in running low miles for around 600-750 ...

    from most JDM engine exchange companies , and salvage yards...But best of luck
    exactly this motor is FTL
    /Oo ___A___ oO\
    |=_/_______\_=|

  32. #32
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Talking

    Quote Originally Posted by MugenCrx
    whats up with the B20??
    i still got the b20.. but can't post it because i do not have a camera right now to post it.. but yeah.. the b20 needs a replacement of a valve.. he got bent.. but it did not mess up the pistons or anything.. the motor is clean.. u can pm about it.. or even call me.. i need it gone, but nobody has picked it up yet.

  33. #33
    Light Tuned
    Join Date
    Dec 2007
    Age
    39
    Posts
    334
    Rep Power
    18

    Default

    dang nvm i was hopin it was good but ill pass on a bent valve thanks anyways

  34. #34
    Certified Gearhead
    Join Date
    Feb 2004
    Location
    In GA; Missing NJ
    Posts
    346
    Rep Power
    22

    Default

    bump

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!