Results 1 to 36 of 36

Thread: 30ish lb spike on pump gas on my old block aftermath

Threaded View

  1. #1
    140 on one wheel
    Join Date
    Apr 2005
    Location
    columbus, ga
    Age
    37
    Posts
    7,324
    Rep Power
    29

    Default 30ish lb spike on pump gas on my old block aftermath

    Story behind this goes like this, my old turbo was smoking like a freight train dynoed it the day before this happen at batlground for shits and giggles and made 360whp and 280trq on pump gas and 20lbs. The following day my new turbo came in. I slapped it on and was driving it from the shop to the house didnt think it would change the boost setting too much so i didnt turn the controller down..a few bikes came up messing with me ( 1 cbr 600 and 2 r6's) so i handed them there ass and around 130mph at the end of 4th it detonated and i ended up with this. Drove the car onto the house thinking it would be the head gasket but nope. Oh well it doesnt matter bought another set of the same pistons for 90 shipped and reused the rods in my z6 block with my built z6 head and im putting it all in my hatch instead of my heavy ass 2600lbs coupe. Then its back to the dyno for 26lbs and c16! cant wait! cost me around 180 to completely replace this motor
    Gotta love d series!




    Last edited by -S Double C-; 05-03-2009 at 09:14 PM.
    I do rb20 and rb25 wiring into s13 and s14's 300.00 shipped 24hr turn around turn ket start guaranteed! PM me for more details!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!