S2k rotors OEM Front and rear

[civicturbo10]

New price $80 obo Not looking for trades, just cash. Have a set of S2k genuine Honda OEM rotors, front and rear. Came from 2003 S2k with about 103k miles. Provided limits below and 5 measurements per rotor to assess current wear on rotors. Price $125 for all 4. These still have a good bit of life left. New from dealer cost around $400. New price $80 obo


Per Honda service manual. mm = millimeters
Front:
Standard new - 24.9 - 25.1 mm
Max refinishing limit - 23.0 mm (min rotor thickness to be used before replacement)
Parallelism 0.015 (to help determine if turning of rotors is recommended)

Rear:
Standard new - 11.9 - 12.1 mm
Refinishing 10.0 mm
Parallelism 0.015

Here are the pics, measurements taken with micrometer.
Front #1 (rotor thickness @ 5 different points) -
24.37 mm ; 24.36 mm; 24.39 mm; 24.37 mm; 24.38 mm

Front #2 -
24.27 mm; 24.28mm; 24.29 mm; 24.27 mm; 24.29 mm

Rear #1 -
11.55 mm; 11.54 mm; 11.56 mm; 11.55 mm; 11.55 mm

Rear #2 -
11.08 mm; 11.075 mm; 11.08 mm; 11.07 mm; 11.09 mm