Results 1 to 14 of 14

Thread: FS: 1965 Ford Galaxie 500 2dr Harttop 352 CI C6

  1. #1
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default FS: 1965 Ford Galaxie 500 2dr Harttop 352 CI C6

    EDITED 01/18/09
    CAR IS SOLD!!

    For sale:
    ALMOST BARN FIND: Parked for 5 years: the project is too much for my expertise. It's in great shape and perfect base for restoration.

    INFO:
    1965 Ford Galaxie 500 2dr Hardtop

    Goods:
    352 CI engine, 4bbl carb, bored .40 over. [b]MOTOR RUNS[/b}
    I think it has the C6 (4spd Auto) transmission.
    all the glass and glass trim
    all the aluminum body trim and almost perfect grille/head light area
    15" wheels
    2 of the 4 classic hubcaps
    Split bench front seats
    original uncut dash
    minimal body rust
    appears no prior accident history
    Full frame car (not unibody like the Fairlanes)
    Floor pans are good.

    Bads:
    Needs rear trunk pan and more than likely a fuel tank/fuel lines.
    Door and trunk seals.
    Needs brake work: parking brake works. Pedal is to the floor board. (approximately $100 in parts to have the wheel cylinders overhauled)
    Interior: needs love. evidence of mold and headliner is drooping
    dash pad has some cracks and has pulled from the gauges.
    car has been painted a couple of times in it's life. paint is crackled & flaking in areas.

    This car is a trailer only car. We used a wench to pull it onto the trailer originally. It does roll. It is in TOO GOOD a shape to send to the crusher. I know someone out there could use the front clip/body/frame/glass. I don't have the time to PART the car and sell it in pieces. Wanting to sell the whole car.

    MAKE OFFER. Will not deliver. email me at ezpawn2k(at)yahoo(dot)com

    Will accept trades for the following:
    Running Harley Davidson 1200CC motorcycle or higher (Panhead or Shovelhead)
    Parts for 1969 Ford Fairlane 4dr
    Classic car wheels that fit 1969 Ford Fairlane (5-Lug)
    Universal Air suspension kit (uninstalled, with all parts)
    Custom Dual Exhaust work or Paint work for 1969 Ford Fairlane.

    updated to reflect changes. Vehicle motor runs.
    Attached Thumbnails Attached Thumbnails -img_0363-jpg   -img_0365-jpg   -img_0366-jpg   -img_0361-jpg   -img_0362-jpg  

    Last edited by Smokin_Joes_2kSi; 01-18-2009 at 06:50 PM. Reason: added FS to title

  2. #2
    Jones Style xdavidscenex's Avatar
    Join Date
    Oct 2006
    Location
    Warner robins ,Ga
    Age
    35
    Posts
    2,619
    Rep Power
    23

    Default

    thats an awesome find. im actually glad you're wanting to give it to someone that could restore it instead of just crushing it. g/l with sale man!

  3. #3
    Windshields hate me. 03RCode's Avatar
    Join Date
    Dec 2007
    Location
    Hiawassee, GA
    Age
    36
    Posts
    9,047
    Rep Power
    37

    Default

    Wow... shoot me your bottom dollar on this, if I'm not interested my uncle may be.
    -Zach-
    2010 Toyota Tundra- Daily on 37's
    1994 Chevrolet Camaro Z28 -FOR SALE
    1987 Toyota Pickup - Toy

    "The most terrifying words in the English language are: I'm from the government and I'm here to help." -Ronald Reagan

    Quote Originally Posted by Catnip View Post
    it was big, made mine look small, probably didn't use all of it

  4. #4
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    pms sent...
    bump...

  5. #5
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    craiglist bump...

  6. #6
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    bump in the night

  7. #7
    YOURMOM tnomud's Avatar
    Join Date
    Mar 2005
    Location
    Coweta
    Age
    52
    Posts
    2,414
    Rep Power
    25

    Default

    $500?

  8. #8
    IA SITE SPONSOR! silversol's Avatar
    Join Date
    Sep 2005
    Location
    LAWRENCEVILLE
    Age
    41
    Posts
    10,211
    Rep Power
    37

    Default

    joe when the hell did you get this! pm me a price!
    Hella stock member!

  9. #9
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    BUMP b/c the car runs now..runs like a sewing machine..

    that $500 offer..stick it

    Joe

  10. #10
    YOURMOM tnomud's Avatar
    Join Date
    Mar 2005
    Location
    Coweta
    Age
    52
    Posts
    2,414
    Rep Power
    25

    Default

    Quote Originally Posted by Smokin_Joes_2kSi
    BUMP b/c the car runs now..runs like a sewing machine..

    that $500 offer..stick it

    Joe

    A simple "no thanks" would have worked, but since you got sassy, I will explain my logic in your thread now.

    At best, if that were a 10 points show winning car, it's a $10K car. A clean driver with no issues brings $3K when the economy is doing well (which it is not in case you have not noticed). Now, seeing a non running car, with the non original motor, a rusted tank, and a giant sideswipe down the passenger side, $500 is not unreasonable. Try a few of the local Rodder Swap meets and you will see what I am saying. Was at one in Charlotte a month or two ago and saw a clean, solid, fresh motor car on 17" Torque Thrusts for $2500. I have a photo of it if you would like to see it.....


    GLWS

  11. #11
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    Quote Originally Posted by tnomud
    A simple "no thanks" would have worked, but since you got sassy, I will explain my logic in your thread now.

    At best, if that were a 10 points show winning car, it's a $10K car. A clean driver with no issues brings $3K when the economy is doing well (which it is not in case you have not noticed). Now, seeing a non running car, with the non original motor, a rusted tank, and a giant sideswipe down the passenger side, $500 is not unreasonable. Try a few of the local Rodder Swap meets and you will see what I am saying. Was at one in Charlotte a month or two ago and saw a clean, solid, fresh motor car on 17" Torque Thrusts for $2500. I have a photo of it if you would like to see it.....


    GLWS
    i appreciate the attitude...as I would have responded exactly has you have...now with that being said....it's tough for you to make that general statement w/o seeing the car in person..also, instead of being a liar, I have portrayed this car as accurately as I can...

    also, this is a "Fresh, Matching VIN Motor " in the car but as you mentioned, that would affect the value. The motor isn't "broke in" and actually as of yesterday had an entire gallon of fuel run through it...I think the prior owner simply "gave up" on trying to get the motor to run....

    and a side swipe? i'm having trouble seeing a Side swipe in pics or in my driveway....I think you may be confusing the body lines with a "side swipe". there is some evidence down low on the rocker that shows "some damage" but it's not enough to crease or damage a panel, it simply damaged the AL trim.

    anyhow, if anyone has any questions, feel free to IM or contact me
    Joe

  12. #12
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    Running car bump
    Joe

  13. #13
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    draggin the car out tomorrow for a couple of people
    let me know if you want to come by dallas & Look at it
    Joe

  14. #14
    Certified Gearhead
    Join Date
    Dec 2003
    Posts
    715
    Rep Power
    23

    Default

    car sold today...
    Joe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!