240sx PARTS FOR SALE

[stephen]

alright, well i sold my 240, and i've got some parts just waisting space. my computer is giving me problems with uploading pics right now, so i'll have them up later on.

s14 KA: partial 5-speed swap $300obo (offers welcome for individual parts)

- 5 speed tranny (2nd or 3rd used to scrub a little)
- ACT clutch/pressure plate (about 75% life left)
- 5 speed crossmember
- clutch slave & master cylinders
- flywheel (needs to be re-surfaced, but it's still good)
- 5-speed driveshaft

s14 KA: partial turbo setup $400 (offers welcome for individual parts)

- ss auto manifold (good condition, no cracks
- treadstone front mount 3.5" thick, 25.75" edge of end tank to edge, 6" tall
no cutting of MAIN bumper or core support needed! i had tabs welded on that line up with 2 threded holes already in the core support brackets; you MIGHT need to trim behind the plastic bumper though, i had an r33 front and it fit PERFECTLY
- all intercooler piping from turbo to TB 2.5"
piping was one of those DIY ebay kits (comes with couplings & screw clamps)
- knock off hks ssq blow off valve with adapter pipe (no welding needed)
- greddy e-manage blue (comes with all harnesses)

s14 ZENKI: several exterior/interior pieces (bumpers are free...make offers on individual pieces or $150 for ALL)
- rear seat bench
- entire black carpet
- gauge cluster
- rear deck lid
- interior door panels
- scratched red rear bumper (i backed into a pole)
- scratched/cracked red front bumper (civic hit me)
- miscellaneous trim pieces ( front and rear a pillars, arm-rest console, et.)
- passenger headlight (has burgundy overspray on the lens)
- there's more, i need to check in the attic...i think i have an ALMOST FULL interior though aside from front seats, dash, steering wheel).

FOR $50 you can have EVERYTHING under here
- s14 right rear quarter glass
- s14 driver's side window
- boxes of miscellaneous stuff (i'm about to go through the boxes now but i know there's stuff in them like accessory brackets, power steering pump, fuel rails, n60 maf, stock cams, stock sr side mount and blow off, bunch of other crap i can't think off...pm me if there's a SPECIFIC stock engine part, i'm sure it's in there).

ONE MORE THING...NSANYATL was holding an s14 carbon fiber hood for me, but i got rid of the car, so i promised to help him sell it. it was starting to de-laminate on one underside edge, but it's an easy fix and still in good shape. $75

once again, i'll update with pics when i figure out what's going on with my camera/card reader. i'll also be adding parts to the list as i clean up the garage and attic today.

pm or call me 678.522.6436

[Lucient]

more info on the ACT clutch and pressure plate please

[DukeDC5]

PM SENT

[HMGDRFTER]

do you still have the center console that connects to the shift boot and the shift boot?

[rockit]

CAN YOU PM ME PICS OF THE REAR SEAT AND CARBON HOOD , VERY INTERESTED. THANKS

[stephen]

here's pics of the transmission (plastic bag over the shifter to keep fom leaking...5speed drive shaft....ACT street clutch/pressure plate

[stephen]

here's pics of the downpipe, intercooler, and ssauto manifold

- the downpipe is a 2.5" - 3" monkey rigged deal (notice pic 3). i had a muffler shop make it to mate up to my old apex-i exhaust. it'll probably work with any ka-t TOP MOUNT manifold & cat back exhaust, you'd probably just need to change out the turbo flange. I'LL THROW THIS IN FREE WITH THE MANIFOLD!

[stephen]

pics of the intercooler, 3 maf sensors (one n60, one e60, and one stock...don't remember the name), sr intercooler (also have the stock blow off valve), master cylinder (will upload pics of the slave cylinder), and another shot of the manifold.

[HMGDRFTER]

pm me price of sr BOV

[jvladamir]

pic of carbon hood plz or your # so we can talk

[stephen]

EVERYONE...i'm sorry about about not having pics of the carbon fiber hood. i'm trying to get in touch with my buddy to have him either send me pics, attach to the thread, or meet up with him in order to snap a few pics. he's been busy, so please be patient.

i've still got more pics of other stuff listed (and not listed) that i'll be uploading between tonight/tomorrow.

[r.parfait]

Do you have stock S14 springs?

[stephen]

Do you have stock S14 springs?

sorry, no springs. i don't have any suspension/brake components.

[HMGDRFTER]

do you have driver side door? LMK

[carly]

where are you located and pic, $ for rear bumper thanks

[TTMdude]

that stock MAF is from a KA right??? if so PM me ill buy it

[xXnimbusXx]

i'll give u a call tomorow. or u can call me. I need some parts. 765-716-8647

[B20_B]

hey do by any chance have the front bumper? and what color is it if u do have it? and price

[junior_tm]

if u have the piece around the radio pm price n where can i pick it up

[canadianrcis]

ill take those bumpers off your hand. pm if you got em

[kedron10]

still got the front bumper beam? if so how much?

[jvladamir]

any of this stuff still around/ update plz

[wannab20hatch]

will the tranny go in a 95 hardbody? any problems with it?

[junior_tm]

how much for the intercooler itself?

[stephen]

sorry i haven't been keeping this thread updated...i didn't get many bites, so i kinda forgot about it.

i've responded to everyone in PM.

to update the list and answer a few questions:

the KA-T stuff is all gone
the carbon fiber hood is gone

i do still have both bumpers, but they do have damage (which is repairable)

i don't have the radio trim (i know this is usually a high demand part)

[jvladamir]

do you still have the ACT clutch kit?

[B20_B]

hey do u have the driver side power window amp? let me know need one asap pm me back

[Brady]

nevermind.