Results 1 to 18 of 18

Thread: 1990 240sx dual swapped...cheap.

  1. #1
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default 1990 240sx dual swapped...cheap.

    EDIT: ok if someone comes and gets it asap ill let it go for $1000 and ill throw in a brand new FMIC kit and a new oil line kit. both still in the box.



    started as a 1990 auto single slammer. i auto to 5speed swapped it with brand new master and slave cylinders, new oem replacment clutch, resurfaced flywheel. as well as rebuilt and swapped in a DE motor. motor was rebuilt with nissan timing kit, oil pump kit, water pump, new gasket kit, arp head studs, cometic head gasket, block was cleaned, honed, and decked, new rings and acl bearings. the car has started up many times and iv even driven it about 3 miles. but it never ran right due to some vacuum leaks. while cleanin up most of the leaks it started a nasty knock...which im pretty sure is a rod bearing.

    everything body and suspension wise is bone stock.

    iv lost interest and money in the 240 and need it out of my parents driveway asap.

    i have a decent bit of money in it...but with it having a bearing problem i know its not worth much.

    soo $1200 OBO...and that means OBO.










    Last edited by 1point8turbo; 07-10-2008 at 02:41 PM.

  2. #2
    ///M :) wannab20hatch's Avatar
    Join Date
    Nov 2002
    Location
    Gainesville
    Age
    41
    Posts
    3,081
    Rep Power
    27

    Default

    where is the car located at?

  3. #3
    IA Member
    Join Date
    Apr 2008
    Age
    39
    Posts
    26
    Rep Power
    0

    Default

    motor still run is there a clutch in there or did you take it all out?.

  4. #4
    Certified Gearhead
    Join Date
    Nov 2006
    Location
    Warner Robins
    Age
    39
    Posts
    488
    Rep Power
    20

    Default

    Quote Originally Posted by wannab20hatch
    where is the car located at?
    Warner Robins. 20 mins south of macon.

  5. #5
    ///M :) wannab20hatch's Avatar
    Join Date
    Nov 2002
    Location
    Gainesville
    Age
    41
    Posts
    3,081
    Rep Power
    27

    Default

    holy **** thats a long way. im an hour north of atlanta.

  6. #6
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default

    car will start up but knock nasty as hell. still has clutch and everything...nothings been touched since it happened.

  7. #7
    ///M :) wannab20hatch's Avatar
    Join Date
    Nov 2002
    Location
    Gainesville
    Age
    41
    Posts
    3,081
    Rep Power
    27

    Default

    pm me the lowest youd take if i showed up with a truck and trailer with cash in hand.

  8. #8
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default

    bump....need it gone!

  9. #9
    Certified Gearhead
    Join Date
    Apr 2006
    Age
    44
    Posts
    283
    Rep Power
    20

    Default

    give me a call i pick the car this weekend

  10. #10
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default

    PMd

  11. #11
    Nissan LOVE nDrew's Avatar
    Join Date
    Apr 2005
    Location
    Atlanta
    Age
    38
    Posts
    377
    Rep Power
    21

    Default

    Bump. Someone buy it so this broke ass can fix his E36.
    '89 240SX - SR20DET W/ T-28
    '07 Frontier SE CrewCab

  12. #12
    IA's hawaiian haynbtu's Avatar
    Join Date
    Sep 2007
    Location
    douglasville,georgia
    Age
    34
    Posts
    567
    Rep Power
    19

    Default

    does it run?
    IA's hawaiian 90 black s13 hatch

  13. #13
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default

    did you read it at all?

  14. #14
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default

    ok if someone comes and gets it asap ill let it go for $1000 and ill throw in a brand new FMIC kit and a new oil line kit. both still in the box.

  15. #15
    Certified Gearhead spicyMSP's Avatar
    Join Date
    Dec 2006
    Location
    Morrow
    Posts
    228
    Rep Power
    20

    Default

    PMed
    Last edited by maporange; 07-12-2008 at 01:17 AM.

    RIP #1417

  16. #16
    Just a Dude
    Join Date
    May 2007
    Location
    Coch town
    Age
    37
    Posts
    579
    Rep Power
    19

    Default

    Dibbs pickin her up tomorrow peace

  17. #17
    IA Member
    Join Date
    Nov 2006
    Age
    37
    Posts
    63
    Rep Power
    20

    Default

    need it gone asap

  18. #18
    Certified Gearhead
    Join Date
    Apr 2006
    Age
    44
    Posts
    283
    Rep Power
    20

    Default

    reply back if you agree to the last pm. If so I pick it sat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!