Results 1 to 34 of 34

Thread: FS: RAGE/HYTECH TRi-Y HEADERS CHEAPER *BEST BANG FOR THE BUCK*

  1. #1

    Default FS: BIG TUBE RAGE/HYTECH TRi-Y HEADERS CHEAPER *BEST Price in the UNIVERSE*

    BIG TUBE B SERIES TRi-Y HEADERS!

    10whp+ OVER DC JDM HEADER!

    THESE HEADERS ARE IN STOCK AND I HAVE THEM IN MY HANDS. THEY WILL BE INSPECTED BEFORE THEY ARE SHIPPED. THEY WILL NOT BE DROP-SHIPPED



    FITS ALL B SERIES ENGINES! WILL FIT CRX AND DA WITH AFTERMARKET TRACTION BARS. ITR MUST REMOVE TRANS BRACE FOR PROPER FITMENT.

    Some basic info on the header


    ---these are brand new in the box

    ---Made of 304 Stainless steel

    ---1 year limited warranty

    ---Long tube tri-y header

    ---2.5 collector

    ---Machined CNC manifold flange

    ---Flange is .38" which is just about 3/8" thick

    ---18G on the 304 S/S. Measured at .049" to .050"=

    ---Flange is .38" which is just about 3/8" thick ---18G on the 304 S/S. Measured at .049" to .050"

    ALL HEADERS COME WITH EXHAUST MANIFOLD GASKET, HARDWARE, AND DONUT GASKET!




    BIG TUBE TRi-Y HEADER $XXX SHIPPED IN THE USA











    Check out the link below to see the full size pictures of these headers


    http://batlground.com/gallery/thumbnails.php?album=210

    I WILL NOT BE UNDERSOLD! THESE ARE IN STOCK AND READY TO BE SHIPPED! Same Day Shipping.

    FINALLY MAKE THE POWER YOU HAVE BEEN WANTING TO MAKE! PICK UP THIS BALLER HEADER AND BE THE ENVY OF ALL YOUR FRIENDS

    CONTACT INFO:
    [email protected]
    PHONE: 770-319-9605
    Last edited by Batlground; 04-06-2008 at 03:10 PM.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  2. #2

    Default

    Those top ones definetly dont look like bseries headers, unless you want your exhaust going out the front

  3. #3

    Default

    fixed


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  4. #4
    i like hubcaps madwick's Avatar
    Join Date
    Feb 2006
    Location
    Dallas
    Age
    40
    Posts
    465
    Rep Power
    20

    Default

    Quote Originally Posted by slow_hatch
    Those top ones definetly dont look like bseries headers, unless you want your exhaust going out the front
    \

    thats because they are for a k series motor

  5. #5
    Senior Member
    Join Date
    Jan 2003
    Location
    kennesaw ga
    Age
    43
    Posts
    1,596
    Rep Power
    24

    Default

    looks like the new secretary is well trained on copy and paste

  6. #6

    Default

    These headers have to go, new products coming in soon. Call soon, they are going fast.

    770-319-9605


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  7. #7
    I hate drifting Big Baller's Avatar
    Join Date
    Nov 2003
    Location
    In the Fucking A
    Age
    45
    Posts
    4,101
    Rep Power
    28

    Default

    Quote Originally Posted by accordm3
    looks like the new secretary is well trained on copy and paste
    Dan actually posted those..
    Quote Originally Posted by Slowwrx
    I fucked ©hris's mom

  8. #8

    Default

    Quote Originally Posted by Big Baller
    Dan actually posted those..
    does he work on the cars??

  9. #9

    Default

    yes he works on cars.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  10. #10
    Senior Member kaotickaozpunk's Avatar
    Join Date
    Nov 2005
    Age
    37
    Posts
    2,140
    Rep Power
    22

    Default

    yo...
    DA SQUAD # 13


  11. #11
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    46
    Posts
    16,170
    Rep Power
    46

    Default

    Will an OEM xmember w/ a monster notch work for a B18 in an EF, or will the traction bars HAVE to be installed 1st? If you want to find out for SURE, PM me the price for 1 shipped to: 46077 and I will get you the definitive answer w/ supporting pics.
    "I'm not a gynecologist... but I'll take a look."


  12. #12
    Certified Gearhead
    Join Date
    Jan 2007
    Location
    augusta
    Age
    37
    Posts
    487
    Rep Power
    19

    Default

    pm'd

  13. #13

    Default

    I found one with a small dent in it. I will let this one go for the low low.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  14. #14
    rubbin' daily HeLLo iM iZzY's Avatar
    Join Date
    Feb 2006
    Posts
    9,284
    Rep Power
    32

    Default

    I'll take it for $100 bucks.

    shiieetttt.
    BUY MY HATCH <--click the link, cuz.

  15. #15
    khmer empire foo!!
    Join Date
    Mar 2005
    Location
    kampuchea
    Age
    40
    Posts
    309
    Rep Power
    21

    Default

    how much for the dent one?do u have pic of it?i sent u a pm,get back to me asap.thanks.


    version 2.0 vtaaaak

  16. #16

    Default

    Bump


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  17. #17

    Default

    Whew PM box is flooded....all PMs responded to.

    Thanks
    Matt


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  18. #18

    Default

    Sorry cleared the PM box again.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  19. #19

    Default

    Bump because Matt says so


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  20. #20

    Default

    Regular B Series, Big Tube B Series, and K-Swap Headers always in stock.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  21. #21

    Default

    Just shipped 4 more, get them while they are hot.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  22. #22
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    46
    Posts
    16,170
    Rep Power
    46

    Default

    Quote Originally Posted by Batlground
    Just shipped 4 more, get them while they are hot.
    I KNEW they were stolen!




    "I'm not a gynecologist... but I'll take a look."


  23. #23

    Default

    Quote Originally Posted by BABY J
    I KNEW they were stolen!




    Bumpage


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  24. #24

    Default

    1 used one instock as well. Hit me up for a smoking deal. It was only on the car for 4 months before the customer went turbo.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  25. #25

    Default

    Just give us a ring. Now there is always someone here to answer your phone calls.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  26. #26

    Default

    UPS picked up 6 more before I left the shop. Its mad Vtec Powa


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  27. #27
    Senior Member kaotickaozpunk's Avatar
    Join Date
    Nov 2005
    Age
    37
    Posts
    2,140
    Rep Power
    22

    Default

    bump this mug..clean man..thanks..i recommend anybody to get this mug..
    DA SQUAD # 13


  28. #28
    Virginity Cure BABY J's Avatar
    Join Date
    Nov 2005
    Location
    everywhere & nowhere
    Age
    46
    Posts
    16,170
    Rep Power
    46

    Default

    Quote Originally Posted by Batlground
    UPS picked up 6 more before I left the shop. Its mad Vtec Powa
    OH SNAP! When VTEC gets mad it's ON!
    "I'm not a gynecologist... but I'll take a look."


  29. #29

    Default

    More of these bad boys came in Friday.


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  30. #30

    Default

    Best price in the universe


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  31. #31

    Default

    Bump because I can can can


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  32. #32
    YR88 Win! Romeo's Avatar
    Join Date
    Dec 2006
    Location
    Middle Ga.
    Age
    37
    Posts
    5,007
    Rep Power
    26

    Default

    do you have any for h-series??

  33. #33

    Default

    50 more just arrived


    Custom Tuning By Daniel Willie.
    Parts, Fabrication, Race Car Prep
    770-319-9605 or [email protected]

  34. #34
    always dirty.... SandM's Avatar
    Join Date
    Mar 2005
    Location
    L'ville
    Age
    39
    Posts
    2,852
    Rep Power
    24

    Default

    i hate not having money at the worst times



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!