Results 1 to 23 of 23

Thread: My Vtec disappeared!!!

  1. #1
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default My Vtec disappeared!!!

    I have an ls/vtec and my vtec is not engageing. It was all working fine till the other day my car stopped sparking and would not start. I changed out the coil and the rotor button in the distributor and the car started again, but vtec is no longer working. also it smells like there is an excess of fuel.

    Does anyone have any ideas why my vtec may not be working?

  2. #2
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default

    any ideas?

  3. #3
    Senior Member | IA Veteran Nismo's Avatar
    Join Date
    Mar 2005
    Location
    Marietta
    Age
    39
    Posts
    5,892
    Rep Power
    28

    Default

    Drop some lemon juice on it and the v-tec should magically reappear. Do you know where it disappeared to? Are you sure its not hiding in your trunk or under your spare tire?
    Quote Originally Posted by blackboi50
    white power!!!!!! .....1

  4. #4
    Level IIIa? LOL. allmotoronly's Avatar
    Join Date
    Apr 2006
    Location
    Macon
    Posts
    3,186
    Rep Power
    23

    Default

    Quote Originally Posted by Timinater
    I have an ls/vtec and my vtec is not engageing. It was all working fine till the other day my car stopped sparking and would not start. I changed out the coil and the rotor button in the distributor and the car started again, but vtec is no longer working. also it smells like there is an excess of fuel.

    Does anyone have any ideas why my vtec may not be working?
    make sure you check all the wiring, such as the wiring to the vtec solenoid, as well as the ecu.
    Land Rover LR3 HSE

  5. #5
    A.D.I.D.A.S. §treet_§peed's Avatar
    Join Date
    Dec 2005
    Location
    Gainesville
    Age
    37
    Posts
    24,950
    Rep Power
    48

    Default

    the excess fuel may have nothing to do with it btw it may be caused by something else
    You know better; next time will be a ban.

  6. #6
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default

    nismo- thanks for nothin funny guy. the wiring seems to be fine. could it be fuel or oil pressure? or maybe the new coil(duralast from autozone)?

  7. #7
    Senior Member | IA Veteran Nismo's Avatar
    Join Date
    Mar 2005
    Location
    Marietta
    Age
    39
    Posts
    5,892
    Rep Power
    28

    Default

    Isnt there a v-tec solenoid that could have broken?
    Quote Originally Posted by blackboi50
    white power!!!!!! .....1

  8. #8
    Certified Gearhead Rsxguy's Avatar
    Join Date
    Nov 2006
    Posts
    441
    Rep Power
    18

    Default

    check ur oil level

  9. #9
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default

    I dont know about the vtec solenoid, i would think that would throw a cel code. and i dont have the right dipstick for the ls block, i guess i can change the oil

  10. #10
    The Juggernaut bafbrian's Avatar
    Join Date
    Feb 2007
    Location
    Smyrna
    Age
    38
    Posts
    1,683
    Rep Power
    20

    Default

    Did you jump the wiring to engage VTEC ?

    Re-check the wiring at the VTEC pressure switch and solenoid just in cause something fired. Also, like a few others have stated, low oil level will cause VTEC not to engage.
    92 EH2 - Current "We will build him, better, stronger, faster."
    98 EJ8 - Stolen ( Thieves)

  11. #11
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default

    what do you mean "jump the wiring to engage vtec"?

  12. #12
    The Juggernaut bafbrian's Avatar
    Join Date
    Feb 2007
    Location
    Smyrna
    Age
    38
    Posts
    1,683
    Rep Power
    20

    Default

    http://www.honda-tech.com/zerothread?id=1693528

    That is what I mean by jumping the wiring harness. I thought my VTEC was engaging when in fact, I hadn't wired it yet.
    92 EH2 - Current "We will build him, better, stronger, faster."
    98 EJ8 - Stolen ( Thieves)

  13. #13
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default

    no, its all wired up, it was working fine before....

  14. #14
    The Juggernaut bafbrian's Avatar
    Join Date
    Feb 2007
    Location
    Smyrna
    Age
    38
    Posts
    1,683
    Rep Power
    20

    Default

    Then, add a little oil and see it that does it. If not, then it may be the solenoid or pressure switch malfunctioning.
    92 EH2 - Current "We will build him, better, stronger, faster."
    98 EJ8 - Stolen ( Thieves)

  15. #15
    A.D.I.D.A.S. §treet_§peed's Avatar
    Join Date
    Dec 2005
    Location
    Gainesville
    Age
    37
    Posts
    24,950
    Rep Power
    48

    Default

    good points.. then again if this doesn't work you could take it to a shop or someone that might have a better idea
    You know better; next time will be a ban.

  16. #16
    4do' not wifey car.. JDMirza's Avatar
    Join Date
    Dec 2007
    Location
    gwinnett
    Age
    34
    Posts
    979
    Rep Power
    17

    Default

    Oil Pressure.

  17. #17
    IA Member
    Join Date
    Dec 2007
    Age
    35
    Posts
    13
    Rep Power
    0

    Default

    change your oil...My friend with his integra had this happen to him and he changed his oil and magically it reappeared. I think that if your oil is too low vtec is disabled

  18. #18
    One of a Kind. DeeAOne's Avatar
    Join Date
    Aug 2007
    Location
    Warner Robins
    Age
    33
    Posts
    5,717
    Rep Power
    26

    Default

    yeah my friend with a B16 ej had the same problem. im pretty sure all it was was low oil. he might have had a bad tune too.


  19. #19
    h series
    Join Date
    Jun 2006
    Location
    norcross
    Posts
    1,968
    Rep Power
    20

    Default

    Quote Originally Posted by JDM ONLY
    yeah my friend with a B16 ej had the same problem. im pretty sure all it was was low oil. he might have had a bad tune too.
    hahahahaha your sig makes absolutely no sense yet it's so funny. i think the little kid in his sig stole your vtec. did you check the oil yet?



  20. #20
    Certified Gearhead
    Join Date
    Jun 2007
    Location
    Warner Robins, GA
    Age
    89
    Posts
    817
    Rep Power
    18

    Default

    Quote Originally Posted by JDM ONLY
    yeah my friend with a B16 ej had the same problem. im pretty sure all it was was low oil. he might have had a bad tune too.

    ummm that would be me... and no. it had nothing to do with oil pressure actually, it was the map sensor. without the map sensor it was running extremely rich all the time. once i had the map sensor wired in everything started working again including vtec.

    but it's definitely something to look into. change your oil and check the pressure.

    you say you smell fuel? if you're running rich i'm guessing it could be possible that vtec doesn't work with too much fuel considering my situation. however, i would recommend taking it to someone that knows what they're doing.

    vtec seems to be pretty tricky. my friend's h22 rarely gets vtec to work.

  21. #21
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    36
    Posts
    13,938
    Rep Power
    51

    Default

    Quote Originally Posted by Timinater
    I have an ls/vtec and my vtec is not engageing. It was all working fine till the other day my car stopped sparking and would not start. I changed out the coil and the rotor button in the distributor and the car started again, but vtec is no longer working. also it smells like there is an excess of fuel.

    Does anyone have any ideas why my vtec may not be working?
    hit 88 MPH and go back in time

  22. #22
    Rice Rice Vtec
    Join Date
    Apr 2006
    Age
    94
    Posts
    1,048
    Rep Power
    20

    Default

    it could be clog'd
    95 Civic EX-Traded
    93 Civic CX -Sold
    93 Nissan Altim-Sold
    95 Civic CX- RIGHT NOW!

  23. #23
    GetItFixItFlipIt Timinater's Avatar
    Join Date
    Oct 2005
    Age
    37
    Posts
    621
    Rep Power
    19

    Default

    so baisacly i feel like a big idiot, because i changed the oil an it started running fine. thanks for everyone's feed back. also if anyone has an ls dipstick they want to sell, let me know

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!