Does anyone know of a good place where I can get my engine rebuilt? Not Mahadavi or R&M Motorsparts. I'm also looking to get a new tranny or my old one rebuilt so if you have any info and/or prices on either that would be great. Thanx!
Need my engine Rebuilt ASAP!
Does anyone know of a good place where I can get my engine rebuilt? Not Mahadavi or R&M Motorsparts. I'm also looking to get a new tranny or my old one rebuilt so if you have any info and/or prices on either that would be great. Thanx!
What motor? back to oem stock spec or "built" cams, port and polish etc...?
pm vteckkid he should be able to help u out.
Stock spec D16Y8! I threw a couple of rods!
if u look hard enough you can get that swap with under 100k for less than 500 bucks. i personally wouldn't rebuild a D just get a new motor.Originally Posted by SLEEK-CRX-SI
Stock spec D16Y8! I threw a couple of rods!
everyone is askin about $1,500 and I'm not paying that much for a POS OBDII single cam.
call up topspeed
Honda-tech,importlounge,ebay or even ia you should try.I know for a fact u can get them off honda-tech for about 700 shipped "complete". either u went to the dealer or a shop for that 1500 quote.
how much are you lettin your old one go for?
D15B is your friend
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Dude it has to be at least OBDII. you can't do a swap in your car and retrograde your engine thats illegal as hell not to mention I'm not trying to ride around all the time with my dam check engine light on. It has to be at least OBDII or higher.
switch Oil Pump to OBD2, problem solved.
And no one out here checks for "same year" or newer engine rule. I would be surprised if any cop even knew what a D15B was lol.
D15Bs are cheap, or make a WTB and ask for a Y8.
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
I wasn't worried about the police they can "bite me" The reason I was saying was about passing emissions. My car does not go by the old test all they do is plug a computer to my car and it gives a read out about how my car has been performing emissions wise. Would my onboard computer allow my car to pass!?!?!?!?
importxp up there about 10 mins? from the mall of ga.
tell john phong sent you.
ok cool, yeah I know john I deliver parts up there all the time.
Well, if you have a CRX then they have no reason to plug in an OBD II computer unless you make a big stink about them needing to.
All you have to do is pass the sniffer test.... RPM based test.
See you are the only one who's kind of in the bad position... just because you updated your wiring doesn't mean you need to do that test... I mean, if it passes that way it would pass the sniffer anyway.
But again, like mike said, just change the oil pump and then the ECU wont know the difference.
I'm just not so sure why you changed to OBD II if you are still running a D series, not worth it in my opinon but it's your call
BooB CreW What ?
One of IA's Awesome Mod's
NASCAR on SPEED's Fun Guy
HOST, Top Gear USA on History Channel starting late this Nov./Dec.
Actually MR LATE MAN I have a 2000 EK (CIVIC) and yes I'm making a "big stink" b/c I'm not going to put an 89-90 pre OBD engine in my 2000 that would not be very smart. So now again since I was asking for an OBD II D16Y8 That's what I need. Don't mean to be rude but if thats what I asked for thats what I need. There was a reason for me asking. You assumed that since my name is Sleek-CRX-Si that is the only car I own! But Thanx!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Call NADAUTO they may have what u r looking instock now
Thanx I called aready they Had one last week and sold it. I guess I was a day late and a dollar short. I asked when they were going to get another in they told me they prob won't in the near future. I'm still confused by that answer.
Posting Permissions
Reply With Quote
