my friend has a rx8 and if he dont use 93 octain gas and put octain booster on top of that his car will flood it's self out. why does it do that and what would anyone recommend.
my friend has a rx8 and if he dont use 93 octain gas and put octain booster on top of that his car will flood it's self out. why does it do that and what would anyone recommend.
Rotarys flood,that what they do..when u crank the car it release gas,turn it off to quickly and it floods,then u have to blow it out,and probbly buy new set of $25 spark plugs..i belive thats what happens,my RX-7 flooded couple times..
if im wrong someone correct me
ok but he can pull up to a red light and it will die and he has to wait forever to get it going again. so he will always have this problem or is there something he can do to fix it.
mine never did that,only time my car died like that was when i would stop with the A/C on,so i learn to live without A/C....also after i wuld flood it,it would run like shit for little whileOriginally Posted by boostedb16
yea his runs like shit for a few miles, it will puff a little black smoke a couple of times and then it will clear up. but it seems like when he puts octain booster in it, it dont do it.
Has anyone done the reflash? And is this only happening on the '04 models? If you haven't had it reflashed, you need to do that. It sounds like it's staying stuck partially in open loop mode. Has any of ya'll had the MIL light come on for a P0420 or anything related to the catalyst effeciency?
K series 626. That's right. It's got a K in it.
where can he have it reflashed?Originally Posted by blackshine007
Unless you know anyone who has a reprogrammer, you'll have to go to the dealerOriginally Posted by boostedb16
K series 626. That's right. It's got a K in it.
You are wrong, you have no clue what you are talking about, and that is from the 2 certified Mazda techs getting drunk with me right now. The internet is not the gospel.Originally Posted by blackshine007
![]()
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
Originally Posted by HalfBaked
Ok then, I'm a former Mazda tech as well. But I was there when the first RX8's were coming to the dealer, and I was the one looking at them. So instead of rediculing me, let's come up with some solutions. Hell, why don't you sober up those Mazda techs and get some answers out of them.Originally Posted by BTLFED
K series 626. That's right. It's got a K in it.
does it call for 93?
i ran 87 perfect with no problems with my 7
They run only on 91 or better. High compression. IIRC, it's 11.5:1Originally Posted by HypnoToad
K series 626. That's right. It's got a K in it.
all rotaries are High CompressionOriginally Posted by blackshine007
Not true. The only mass-produced facotry rotarys that can be considered high-compression are the Renesis motors.Originally Posted by HypnoToad
Mazda rotarys ranged from 8.5-9.7:1
FDs were only 9.0:1
i thought thats y u couldnt turbo a 13B N/A was because of the compression,and also blowing the apex seals to hellOriginally Posted by David88vert
Tell your friend to buy a new car because he obviously doesn't know WTF is going on when it comes to cars.Originally Posted by boostedb16
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
Originally Posted by HalfBaked
so you want him to buy a new car because he doesn't know wtf is going on when it come's to carsOriginally Posted by BTLFED
![]()
. but anyway he has taken it to the dealership and they dont know whats up. but i will tell him to take it and try to get it reflashed.
FYI from one of the now sober Mazda Techs (you idiots)-The recall that is run on all of the RX8s includes an engine vacuum test, PCM reflash and/or TCM reflash if included, new leading plugs, test and replace the battery and starter if needed. If all else fails, new long block. Between the two techs that are here, they have seen roughly 100 long blocks replaced in the last 6 months, some of them done multiple times on the same car. One of them has replaced 4 of them himself. I could post the 28 page actual recall from Mazda, but it won't fit in one post, and I don't think you deserve to see it.Originally Posted by boostedb16
So there is your fucking answer you douchemagoos. Buy a new fucking car.
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
Originally Posted by HalfBaked
Originally Posted by BTLFED
I knew that in some shape, form or fashion that could almost be useful here. Nice info.
K series 626. That's right. It's got a K in it.
Almost be useful? Last time I checked, that was all the info he needed. Sounds really useful to me.Originally Posted by blackshine007
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
Originally Posted by HalfBaked
i will tell him all of that and thanks for the FRIENDLY help, a simple reply would have been fine but thanks again.Originally Posted by BTLFED
I don't make things simple just because you people are idiots. I'm not dumbing down my posts to satisfy you.Originally Posted by boostedb16
--RIP Leisa. Forever In Our Hearts--
--Val for President 1979-2007--
--RIP Val, You will be missed--
Originally Posted by HalfBaked
Or take the god damn thing to a dealership and ahve them check it.
90% of teens say "oh shit" before a wreck. The other 10% are from Pennsylvania, they say " hold my beer and watch this shit."
EvasiveEF9: Just fill me in...if it's black, I'm all over it...
Take it back to the Mazda dealer!!!!!!Originally Posted by boostedb16
92 mx3
fuck that RX-8,ill get me RX-7,and run 87