Wheels, B18a, D16 block/trans, misc parts. SPRING CLEANING!

[SKarpenz]

Motegi 5 spoke 16x7 4x100 and 4x114 wheels w/ 205 55 16 tires. Two tires are 90% and two are completely bald. No curb rash or anything. - $300 OR BEST OFFER!

B18a LS motor. Unknown mileage, comes complete with head, block, intake mani, TB, and should be in good shape as I was going to use it in a civic but never got around to it with all my projects. - $330 (I just need it gone) (Block Code - 1330499)

D-series Trans, shifts fine, no grinds - $120 (code in pic)

D-series linkage w/ poly bushing - $25

D16Z6 block - unknown condition, rust on the cylinder walls. All internals in tact but not sure on the condition. Good block at least. - $50 (Code in pic)

DC Integra LS front shocks/springs, good shape, car had 120k on it. - $30 for both, $20/each

Panasonic DFX700U Head unit, Good shape, everything works, comes with remote and original harness. - $80 shipped

Sony XE-90 Graphic EQ, all the buttons are still there, the sony logo just came off the left side. Everything works. - $15 shipped

Pioneer DEH-P44 Head Unit, Everything works. - $45 shipped

Q-Logic ported sub box for two square 12's (like L7's). Or adapt it for round 12's, I'm not sure what happened to adapter panels for this one. - $75

I live in Cecil GA. Exit 32 off I75, but I will drive an hour up the interstate to meet someone.

[Frög]

good luck..

[civic-h22]

any trade for da Enkei ?

[SKarpenz]

http://cgi.ebay.com/ebaymotors/17x7-...QQcmdZViewItem

Like I said, best offer. I'm just throwing up a price since I can't ask for "best offer."


I can trade. If you have a set of wheels I can throw on my Eclipse, and then you give me cash on top.

[DJ Raijin]

I'll give you $3 for the bed frame in your shed!!!

j/k bump for my boy

[J01civic]

Pmed

[GermanMuscle]

do you have any idea how much the motegi weigh without the tires?

[blown_ss]

ill trade you my brand new in the box 15" kicker comp vr for the tip. it retails for 350. let me know what you think.

[SKarpenz]

ill trade you my brand new in the box 15" kicker comp vr for the tip. it retails for 350. let me know what you think.

Wow thats tempting man. Lets see if we can set up a time to meet and swap, because I'm down for that. I live in S GA at exit 32 off I75. Its like 2.5 hrs from atl, but I can drive an hour north to meet. Let me know whats up.

The Motegi wheels weigh 19lbs each w/out tires.

[SKarpenz]

I will trade for 6-bolt DSM parts. Mainly forged internals/2.4 crank/whole block.

[bernard]

Man those enkei are hot fooool!! If they were 15s and 4 bolt ill get them. Ill rock my volks on one side and them on the other. Man u need to keep them bro, they are hot. But bump for my homie. A fool call me cause we need to get the lude on the road again.

[crzydesi]

how long did u use that exhaust? i might b interested if i could sell my current exhaust...

[Frög]

do you have any idea how much the motegi weigh without the tires?

21lbs?

[SKarpenz]

I used the exhaust for like...2 years? Sounds about right. It is a UNIVERSAL muffler, for those of you who have PM'd me. That pipe that its connected to goes to an MX6 axle-back, and will not be included in the sale unless someone just NEEDS it, haha. BTW, I'm pretty firm on the muffler, since I paid $300 for it brand new.

[crzydesi]

the exhaust comes with the silencer?

[SKarpenz]

PM'd and Bump.

[SKarpenz]

Bump, its all still here. Someone make a reasonable offer on the wheels. I need to ditch them.

[SKarpenz]

How about someone trade me some DSM engine parts?

[crzydesi]

if you werent so far i woulda picked up that exhaust...

[bernard]

Bump for da homie,

[jankestang]

will you drive to summit?

[DaMaGe ZWK]

man ive been trying to get in touch with you for almost a week... answer your pms or something

[SKarpenz]

man ive been trying to get in touch with you for almost a week... answer your pms or something

You haven't sent me any PM's or I'd have responded.

[SKarpenz]

will you drive to summit?

I'll consider it, whatcha need?

[SKarpenz]

Just to reiterate, I live in Cecil, in south GA. Want to make sure everyone knows my location before they expect me to meet them somewhere in ATL.

[jankestang]

Im interested in the motegi wheels

[cactusEG]

i p'med u whats up with it than?

[SKarpenz]

i p'med u whats up with it than?

Sorry dude, I thought I responded to you. I can't trade for another set of wheels, I either need money or DSM parts to get my ride on the road. Thanks for the offer though.

[SKarpenz]

Im interested in the motegi wheels

Cool man, come get them, haha.

[jankestang]

i will let you know something

[SKarpenz]

Prices lowered. If I take less than whats advertised, then you will be driving to Cecil. I'll meet an hour up the interstate if you give me what I'm asking. The prices are fair for all the stuff here.

[Doppelgänger]

Pics proving the wheels are actually Enkei. Take a pic of the "enkei" stamping on the inside of the wheel.

Not to be a dick, but i know wheels very well and there are signs that those are not Enkei wheels.

RP-F1's dont have a polished lip. The real Enkei wheels have the stamping near the center of the wheel, not on either side of the valve stem. Nor do the Enkei's have a dual lug pattern.

real:



wheels in question:

[n1accord]

Bump.....Buy this guys stuff................cuz.....jus cuz

[SKarpenz]

Enkei's arent for sale anymore anyway. I don't know if their real or not, but they look hard as fuck on my DSM, and I refuse to roll on steelies.

[SKarpenz]

Bump for LS motor!

[DJ Raijin]

bump for my brother from another mother

[SKarpenz]

Bump, and yes I have a VC for the LS motor.

[SKarpenz]

Bump.

[JITB]

u still have thae speakers? i want them but thats a far ride for 20$..lol How far are u from atl exactly?

[SKarpenz]

Man, I live like 2 hrs from ATL. How about I just ship them to you for $20? I am willing to do that but I forgot to mention it in the ad. PM me if your interested. Theyre brand new still with all pkging and all.