WTB: D series All motor parts

[Mr.MuayThai]

Yep, you heard me. . . Im looking to raise the compression on the litte beast! Im looking for. . . Let me know what you have and I will see what i can do! thanks!


keep in mind this is a d16z6 Im building. . .

Cam ( i was thinking Comp)
Springs, Retainers, and valves
Manifold (blox or sk2)
76mm Throttle body
310cc injectors obd1
ZC pistons (or something with just higher compression)
Some type of Header
Vtec Controller
And a after market clutch!

[1SOL2NV]

i got some rc 320 cc ..... obd1 .... .. jus used on the dyno .. ... 250 obo .

[rickylsi]

Ive got a bisi motor header that is made for all motor drag. The head you where looking at from Streetstuff on here is where it came from. He told me that head work was done to go with this header. LMK if interested.

[Mr.MuayThai]

Thanks guys! Im def considering!

[xbn83]

310cc injectors obd1 what type? Saturated or Peak and hold?

92+ civic use saturated

You could find these cheap:

2000-up Celica GT-S 310cc saturated
If you want Peak and Hold then get 92-96 Prelude Vtec 345cc

[Mr.MuayThai]

I don't know what the difference is between Saturated and Peak? hell i don't even know what they mean? I know Saturated is soaked, and peak is top. . . but i dont know the car lingo for that?

[rickgiblin]

hey i got a brand new dseries axel

[xbn83]

I don't know what the difference is between Saturated and Peak? hell i don't even know what they mean? I know Saturated is soaked, and peak is top. . . but i dont know the car lingo for that?

Saturated injectors are high impedance (use high ohm).
Peak and hold injectors are low impedance (use low ohm), uses with resistor box.

http://hondaswap.com/general-tech-ar...jectors-30347/

But if you have 92+ civic, your car use saturated, and if you want to use peak and hold injectors, you have to wire in a resistor box otherwise you will run into trouble.

[1SOL2NV]

my rc injectors are saturated . 320 rc .... well lmk muay .250 an ill ship em to you free .....