Customer's cars, ongoing projects, and builds!

[Evil Goat]

If there are any customers I have overlooked it's probably because I don't have a picture of your car....PM me pictures and we will add you up


Thread will be updated with pictures as I remember to snap them, or find them!

Current Builds taking place...Pictures to come soon!
-1996 civic coupe - borg warner turbo, full motor build, shooting for 650+
-2003 Evolution - borg warner turbo, full motor build, shep trans, shooting for 650+
-1991 240sx - full sr20 internal build, turbo/manifold upgrade
-2003 RSX K24/20 hybrid internal refresh

The JJSPEC Racing 1995 Hotrod Honda Civic - Best Time: 9.2@158mph

CHASSIS IS FOR SALE!!!!! SERIOUS BUYERS ONLY!!!!!

I will be posting pics as we update the Hot Rod Civic over the next couple of months.

Year:1995
Make:Honda
Model:Civic
Transmission type: Manual w/ Quaife
Engine:H23 VTEC
Displacement: 138
Engine Modifications:
-Darton Sleeves
-JE Pistons & BME Aluminum rods
-JJSPEC Racing prepped Stock Crank
-ARP Main and Head Studs, Brian Crower Springs and Titanium Retainers
-Brian Crower cams - went 9.2 on stock cams

Fuel System:
-Aeromotive Eliminator Fuel Pump & Aeromotive FPR
-JJSPEC Racing 2.8 gallon fuel cell
-1680 cc Injectors

EMS: Hondata S300 Track Tuned by Jimmy Jones

Power Adder:
-Bullseye Power S374 with Race Cover
-Precision liquid to air I/C
-75 mm Throttle Body
-Tial 60mm Wastegate & Tial BOV

Body Mods:
-One piece front end, Fiberglass trunk lid, & Lexan windows

Sound System:
-4" front exiting exhaust

Suspension Modifications:
-JJSPEC Racing Staight Rear Axle, Eibach springs 650lb Frt, 125 Rear, -Wheelie Bar

Braking modifications:
-Stock front brakes and a parachute!












Video's of the car in action:

http://www.youtube.com/watch?v=fJq9stfMaNE - At 2:22

Demo burnouts done for NOPItv commercials

http://videos.streetfire.net/video/2...Out_156292.htm


Nick's 1997 Honda Prelude - Car is still in construction mode, but will be done as soon and ready to be tuned as soon as T1 Motorsports return ships the shifter with the newly installed strain gauge.

Year:1997
Make:Honda
Model: Prelude
Transmission type: PPG Dog Box, 4.4 FD with Quaife LSD and Strain gauge (For clutchless shifting)
Engine:Blueprinted and balanced H22 VTEC
Displacement: 132
Engine Modifications:
-Golden eagle block
-Golden Eagle manifold
-70mm STR Throttle body
-Arias Pistons over 20
-Eagle rods with ARP rod bolts and head studs
-Brian Crower Stage 3 turbo cams, dual valve springs & titanium retainers
-Ferrea SS valves
-3 angle valve job, port and polished head
-Crank and flywheel have been knife edged and balanced
-MSD digital 6 ingnition and external coil
-Hondata S300
-Spinwerks fronts and rears with Mickey Thompson 26" slicks
-Custom billet solid motor/transmission mounts
-Tial wastegate
-Custom Dumptube/wastegate tube
-Custom Front Battery Mount
-NHRA Legal 6point Cage - I'm sure will be changed to 8 after a few shakedown passes






Seat belt tabs welded in place:



A few random pics:









PPG Dogbox gear set - Transmission built inhouse - Dark colored gears are the original heat treated gears

The ring gears side by side:



The Mainshafts with the handcuff side by side:



The countershafts:



Final Front end product...Paint is last on the list



Nick wanted the exhaust to exit out of the front bumper....anyone who knows these year model Preludes knows this is near impossible without tubing the front end....but we did it and strengthened the car in the end as well.



The intake that goes through the frame



top view of the intake, and the alternator bracket JJ fabbed



front view...still tweaking the velocity stack that will be mounted on the front



the other side, exhaust exiting through the frame...



the shifter with strain gauge installed...doesn't look like much, but theres magic inside



quick interior shot, still some minor stuff to do...



and under the hood...




Weight figures w/o driver:
Total weight: 2372lbs

LF 810 34.1% RF 762 32.1%

LR 412 17.3% RR 387 16.3%


Front/Rear Bias 66.2/33.7%

Left/Right Bias 51.5/48.5%

At the time of corner balancing the car had approximately 3 gallons of fuel, missing dump tube, misc. tubes and a little wiring. It also had factory rims on when corner balanced and a few things sitting in the car that have since been removed.

I will have finalized shots of the car soon....these are just some shots here and there as the car is being built.

[Frög]

HOLY SHIT those headlights are rice!!!!!

[Evil Goat]

Tye's GS-R Hatch - Best time to date 11.15@128mph - 10's coming soon with full interior








Gabe's '86 Grand National









Joey's Integra - All motor went 13.6@100mph - Currently Under the Knife - Original motor build done by JJSPEC - Joey is an outstanding driver...we can't wait to see this car with boost!









Put your shades on for these!










Peter's 240sx - Former JJSPEC Employee and SR20 Hater, and owner of the single sexiest 240 I've ever laid my eyes on!

[Evil Goat]

Evil Goat's '04 GTO - best time to date 10.98@126mph on stock intake box, headers, & suspension! - The Fastest LS1 GTO in Georgia! - All performance mods installed at JJSPEC - I was a customer before becoming an employee










Kyle's 2000 Type-R - soon to be boosted as well!

[Evil Goat]

Chris' 2000 Honda S2000







Kyle's 1995 SFWD Civic - Complete build done by KP Fabrications - it's almost done!

[Big_Joe]

Good shit man. That prelude is sick.

[Evil Goat]

Dave's '05 GTO - Suspension work done by JJSPEC

[jjmastertech]

Thanks for posting up Mr Goat! Kit said he is working on something special for you! There have been several 10 second cars and a 9 second Honda come out of here! More to come!

[Evil Goat]

Originally Posted by jjmastertech

Kit said he is working on something special for you!

now we're talking! i've been thinking about it all week long, lol

[jjmastertech]

Originally Posted by Evil Goat

now we're talking! i've been thinking about it all week long, lol

You know Vital Signs does some of the baddest vinyl in GA! Cant wait to see what he is cooking up for you!

[AFSil80]

Juuuuust one more of the GN.



And I was a customer before becoming an employee as well!

[Evil Goat]

TEH WALRUS!

[AFSil80]

Hah, I tried to find the pic that was the least obvious that still showed off the FMIC.

[jjmastertech]

Oh noes! The walrus is awesome!

[d16_turbo]

nice

[JBalla1036]

Whats the specs on that SR build?

[Evil Goat]

Originally Posted by JBalla1036

Whats the specs on that SR build?

don't know if the owner wants the specs out....but its nothing major, pistons/rods, minor head stuff, combined with a better manifold, turbo, and refitting the dp

[Evil Goat]

updated some stuff on Nick's Prelude!

[jnv255]

Originally Posted by Frög

HOLY SHIT those headlights are rice!!!!!

Haha, I know. My factory ones were cracked by a 18 wheeler tire that flew up off the road, im gonna tent them so u dont see em,lol

Nice pics Josh, we need one of my car clean,lol.