Results 1 to 6 of 6

Thread: Start Up Issue

  1. #1
    Who's online...I'M ONLINE JUSHAVNFUN69's Avatar
    Join Date
    Mar 2005
    Posts
    587
    Rep Power
    0

    Thumbs up Start Up Issue

    I get these msg at boot up:

    CMOS CHECKSUM BAD
    CMOS DISPLAY TYPE WRONG

    whats the deal...can anyone help me out on these one?
    Stand up to be seen; speak up to be heard; shut up to be appreciated.

  2. #2
    iamgraphicdesign uproot's Avatar
    Join Date
    Mar 2005
    Location
    :noitacoL
    Age
    42
    Posts
    7,332
    Rep Power
    34

    Default

    alright man... i'll ask him about. all i know is he loves linux.... loves it. and absolutely despises windows.... but i'll see.

  3. #3
    Echinsu Ocha Pher's Avatar
    Join Date
    Apr 2004
    Location
    Atlanta/NYC
    Age
    43
    Posts
    4,243
    Rep Power
    28

    Default

    A CMOS check sum error is usually caused by corrupted data in the CMOS memory. When the computer boots it adds all of the ones and zeros in the CMOS and drops the carry bit. It compares the resulting sum to a like (we hope) sum that was generated when the CMOS data was produced. If the two do not match, the CMOS is presumed corrupted, and an error is generated. The corruption can be caused by defective CMOS memory or power problems caused by a shorted motherboard, an expansion card that is not properly seated, a defective component, etc. I would check the battery with a multimeter and make sure it is good and installed correctly. Some older motherboards have a CMOS battery soldered onto the motherboard and have a jumper which must be changed to use an external battery. The battery on the motherboard should be removed if an external battery is installed. It can leak and damage the motherboard beyond repair. Do not use a soldering iron or anything hot to remove a battery form a motherboard. The battery can explode. I use a combination of pliers and diagonal cutters to remove these batteries. The computer must be unplugged when doing it and care must be employed (not an operation for an overly ambitious gorilla). Some batteries include the system clock, are usually black and rectangular, soldered to the motherboard, and are supposed to have a 10 year or greater lifetime. When they fail, the motherboard is usually a goner. Most motherboards have a jumper, which can be used to discharge (erase) the CMOS memory, and this may fix the problem. Be sure the computer is off and unplugged, move the jumper to the discharge position, wait 10 minutes, move it to the normal position, attach the power cord, and turn-on your computer. Some motherboards can be damaged it the computer is powered on with the jumper in the discharge position

  4. #4
    Who's online...I'M ONLINE JUSHAVNFUN69's Avatar
    Join Date
    Mar 2005
    Posts
    587
    Rep Power
    0

    Thumbs up Preciate Chris

    I'LL TRY THAT TOMORROW!!!
    Stand up to be seen; speak up to be heard; shut up to be appreciated.

  5. #5
    turbo emo...  Z33_kid's Avatar
    Join Date
    Mar 2005
    Location
    Gwinnett, GA
    Age
    36
    Posts
    2,657
    Rep Power
    23

    Default

    computer ghost lol evil

  6. #6
    Who's online...I'M ONLINE JUSHAVNFUN69's Avatar
    Join Date
    Mar 2005
    Posts
    587
    Rep Power
    0

    Default It Worked

    Quote Originally Posted by JUSHAVNFUN69
    I'LL TRY THAT TOMORROW!!!
    YOU DA MAN DAWG!
    Stand up to be seen; speak up to be heard; shut up to be appreciated.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!