Page 1 of 7 12345 ... LastLast
Results 1 to 40 of 271

Thread: Hmm... 1911 content inside!

  1. 01-11-2010, 04:43 PM #1
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default Hmm... 1911 content inside!

    Sup fockers!

    I picked up another 1911 project. It hasnt made it to my door just yet. Should go in the mail on thursday and be on my door sometime on saturday or monday. I have been SEARCHING FOR A LONG time to find something that would be a good project to start with and not to much cost up front. I had one like this in stainless before and loved it. I sold it because I wanted one with an alloy frame. I bought it and sold it. Needless to say. I wanted another so here it is:

    Springfield Armory 1911 Champion .45 ACP.

    List of goodies the previous owner told me it has:
    -Full Length Recoil Guide Rod
    -Vioecki Trigger
    -Custom Night Sights
    -Extended Beavertail Grip Safety
    -Extender Slide Release
    -Commander Hammer
    -Flat Checkered Main Spring Housing
    -Lowered & Flared Ejection Port

    ALOT of these parts will be coming off in order to replace and refit more parts. I already have a match barrel for it I have been holding on to for a while. I will not fit it until i get the rest of the gun where i want it. Here are some pics from the ad. These list for about $650-700.
    Attached Thumbnails Attached Thumbnails -pix699283578-jpg   -pix699283640-jpg   -pix699283718-jpg   -pix699283781-jpg   -10-jpg  

    Last edited by Truegiant; 03-11-2010 at 10:38 PM.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  2. 01-11-2010, 05:32 PM #2
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    pretty cool man. cheap too! Think the tangs will have to be welded up to achieve a good beavertail fit? Those sights are pretty crazy too. Cant wait to see what ya do to her!
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  3. 01-11-2010, 05:37 PM #3
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    You mean you cant wait to see what your going to do to her.. haha..

    I told you grasshopper.. you need practice.

    When I get it in I will check it over fully and inspect what needs to be done.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  4. 01-11-2010, 05:56 PM #4
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    bobtail that bad boy
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  5. 01-11-2010, 06:06 PM #5
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    I am thinking about it. Bobtail, more cocking serrations, checkering front strap, under trigger housing, and of course some more goodies. Refit a beavertail, smoothed mag chute, hmm.. much more of course.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  6. 01-11-2010, 08:58 PM #6
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    CBOB PORN
    Attached Thumbnails Attached Thumbnails -011-jpg   -1911forum_dw_cbob_01-jpg   -1911forum_dw_cbob_02-jpg   -1911forum_dw_cbob_04-jpg   -1911forum_dw_cbob_likes_01-jpg  

    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  7. 01-11-2010, 09:03 PM #7
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    AND MORE
    Attached Thumbnails Attached Thumbnails -1911forum_dw_cbob_likes_02-jpg   -img2257z-jpg   -x4m9tt-jpg   -steel_cbob-jpg   -carry1911s-jpg  

    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  8. 01-11-2010, 09:04 PM #8
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    AND THE ONE I AM LOOKING AT FOLLOWING THE STYLING OF:

    I like the flats done this way! SEXY!
    Attached Thumbnails Attached Thumbnails -attachmenttl9-jpg  
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  9. 01-11-2010, 10:09 PM #9
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    i dig the polished flats too. I would love a stainless as my next build. I need to find out what media they use to blast the rounds that gives it the dark finish. Alox. maybe?
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  10. 01-12-2010, 10:25 AM #10
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Thumbs up

    so what model is this thing exactly. Its quite strange in comparison to springfields current model line up. The dust cover looks like those from the early 90's springfields. :Cool: any idea what year she is?
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  11. 01-12-2010, 10:28 AM #11
    DamnDisLaOsBoY
    DamnDisLaOsBoY is offline
    Team Korupshun DamnDisLaOsBoY's Avatar
    Join Date
    Apr 2005
    Location
    Lawrenceville, Ga
    Age
    40
    Posts
    2,388
    Rep Power
    23

    Default

    build thread please!! how do you get a gun shipped to your door? in parts?? i always thought u had to have it shipped to a local gun shop or something
    Reply With Quote Reply With Quote
  12. 01-12-2010, 10:43 AM #12
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    I am not sure the model year. I didnt even ask for a serial number to be honest. I didnt notice that many difference between this model and my early 2000 model stainless I owned before.

    There will be a build thread for sure. I am thinking about switching back to checkering instead of scalloping? Not sure. I am putting together a huge list. First thing that will happen is taking it out and shooting it of course. Then I am going to just order a couple of small items here and there. Once I get her shooting like I like I will send it off for all ergonomic and cosmetic goodies.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  13. 01-12-2010, 10:44 AM #13
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Oh.. I meant to my door as in through my ffl to me. I have an neighbor I whore out for all ffl stuff. After wasting over $700 trying to get an FFL for a home based business I gave up on it until I can open up a store front . Which might be sooner than I thought@!!!!
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  14. 01-12-2010, 02:33 PM #14
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Sold my mauser last night. Now I just have to sell my utility trailer and I will be good to go to start ordering parts.

    I am trying to get some business models together for some up and coming ideas! Gonna be an on and off project!
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  15. 01-12-2010, 09:04 PM #15
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    I spent three hours typing up business proposals and info for my businesspartner. Now I have to draw up some site plans and do some more price shopping for the business and I think we will be set there.

    I am working on picking up another truck. I have been looking for a nice reg cab dually turbo diesel setup but havent had any luck. There are a bunch of good deals out there but not one that is in my price range. I think I have found a nice little daily driver truck. A early 80's toyota 4x4. Its in decent shape and has had alot of recent service. The guy is interested in trading for my custom .17 and some cash so that will help cut costs down. I still have my trailer and a couple of other "goodies" i need to sell before i can start ordering parts for my new 1911 project. I have not had time to put a list of parts together yet.

    Danny - have you started looking into finding a champion? if you find a nice lightweight around the same price pick it up and we can swap. once i get it in and start messing with the barrel and frame/slide i will send it up to you with the other goodies for a blasting. start putting a potential list together for your next project also that we talked about. I mentioned to my Business partner today about how we could squeeze another team mate into the mix. We still have alot of talking about it to do.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  16. 01-12-2010, 09:14 PM #16
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    http://forums.officer.com/showthread.php?t=129957

    Good read if you want some 1911 info!
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  17. 01-12-2010, 10:29 PM #17
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    i have been keeping my eyes peeled for one. There was a ltw commander (colt) i think at the store the other day. Of course its more expensive, but it was purtyy

    Glad to hear the biz plans are going good.

    I just got done meeting iwth my biz partner (dad lol). Looks like i have some side work coming up managing some of our properties and preping a few houses for rent/sale. Now i should really be busy for a couple months at least.

    rant- im getting sick of this effin RE market

    Time for bed, eyes are blurrryyy lol
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  18. 01-13-2010, 01:29 PM #18
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Called Springfield today - .45 Milspec Frame manufactured in January of 1997
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  19. 01-13-2010, 01:55 PM #19
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Ok Well I am pissed. The guy I was supposed to meet up about the truck bailed on me. After we arranged a meeting time i called him back and he said it was sold. LAME!

    I thought people had manners around these parts? Anywho..

    More money for the gun fund i guess.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  20. 01-14-2010, 10:18 AM #20
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    look at this! By ted yost. They are raffling it away, all proceeds going to the Naval Special Warfare Foundation!

    Outstanding looking Springfield. Funky checkering/sights huh??

    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  21. 01-14-2010, 02:47 PM #21
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    I like the checkering alot. I was actually doing research on those sights last night pretty late in the evening. Your eyes supposedly can see the site better because it takes in the little bit of depth perception to focus on both the front and rear siight. Anywho.. that might not make sense. i will go and find the site again on these sights.

    I think I want to bevel my slide as well. I have never had one done that way. I love the flat top cut on top as well. Oh and those grips are sex!

    I like the subdle accents of polished parts on the gun. Breaks up the contrast alot. I am trying to decide if i want to build a fighting gun out of this one or a nicer looking carry gun???

    I just dont want to go to overboard and be dissapointed with how much i spend.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  22. 01-14-2010, 03:01 PM #22
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    are those larry davidson grips ya think?

    Looks like you need to buy a mill, so u can flat top the top side and chamfer the bottom of the slide.

    I wanna build a sexy retro! Commander hammer, duckbill grip safety, mil sights, stippled FS (sayy whaaa lol), and some other goodies
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  23. 01-14-2010, 03:36 PM #23
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Send me list of what you have in mind and lets get this started, haha.

    I am working a deal on another nice champion for cheaper than what i got mine for. Guy wants to keep his grips and sights so that helps out alot on price!

    Anywho.. I will keep you informed.

    I think I am going to keep this one moderately priced and build a nice Colt Delta Elite 10mm stainless for a BBQ gun. Anyone know where one is for a good price thats willing to do some trading?
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  24. 01-14-2010, 03:46 PM #24
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Looks like you need to buy a mill, so u can flat top the top side and chamfer the bottom of the slide.

    haha.. if i had the money i would
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  25. 01-14-2010, 05:28 PM #25
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    i wanna cheap champion how u find this stuff. argh
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  26. 01-14-2010, 05:50 PM #26
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    If i get it , it will be for you shit head. I gotta come up with a way to pay you for your "time" - haha

    Did you figure out how much i am going to have to pay you to bring your ass down here and run my range?
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  27. 01-14-2010, 07:21 PM #27
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    Quote Originally Posted by Truegiant View Post
    If i get it , it will be for you shit head. I gotta come up with a way to pay you for your "time" - haha

    Did you figure out how much i am going to have to pay you to bring your ass down here and run my range?
    Depends on if i get to help expand the company or if i get stuck yelling at people for covering thier mom standing next to them for the rest of my life.

    Cause if its option #2, you cant afford me. lol

    ps. responded to u on nog,

    pss thanks for hanging up on me on the phone dickstick
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  28. 01-14-2010, 07:25 PM #28
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    sorry. was busy. wifey was yelling at me. i resonded on woodys to your pm knob slobber.

    You will be helping expand; however, if i dont get my god damn handcuffs and knife coated the only thing you will be involved in expanded is my big dick = hahahahahahahaha


    anywho..

    We will take this to pm on woodys
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  29. 01-14-2010, 07:28 PM #29
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    Quote Originally Posted by Truegiant View Post
    sorry. was busy. wifey was yelling at me. i resonded on woodys to your pm knob slobber.

    You will be helping expand; however, if i dont get my god damn handcuffs and knife coated the only thing you will be involved in expanded is my big dick = hahahahahahahaha


    anywho..

    We will take this to pm on woodys
    bench is free, u were supposed to send them up here "end of this week". and have you done that NO.

    Now ur going to get mixed in with school, work, and reloading... u too slow capt
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  30. 01-15-2010, 08:55 PM #30
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    http://www.thewarfields.com/Colt1911.htm

    neat links and info on here.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  31. 01-15-2010, 09:04 PM #31
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    Hmm.. Snakeskin or scalloping, square trigger, slightly larger blended magwell, and more.. my list is getting long!
    Attached Thumbnails Attached Thumbnails -dsc02520-jpg   -ellis3-jpg   -s13-jpg   -s24-jpg  
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  32. 01-15-2010, 09:23 PM #32
    Big Baller
    Big Baller is offline
    I hate drifting Big Baller's Avatar
    Join Date
    Nov 2003
    Location
    In the Fucking A
    Age
    45
    Posts
    4,101
    Rep Power
    28

    Default

    Bob Rogers stuff is freaking amazing
    Quote Originally Posted by Slowwrx
    I fucked ©hris's mom
    Reply With Quote Reply With Quote
  33. 01-15-2010, 09:45 PM #33
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    sexy
    Attached Thumbnails Attached Thumbnails -dw005-jpg   -dw009-jpg   -ellis3-jpg  
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  34. 01-15-2010, 11:39 PM #34
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    STI 2011 series pistols utilize double stack technology with the same width as a single stack with standard grips. AMAZING!

    I got a buddy who just ordered a sti 2011 series and we went out tonight and shot it. AMAZING!

    I have been a fan but nowi am on the bandwagon.

    sti tactical 4.15 is going to be in the mail asap!
    Attached Thumbnails Attached Thumbnails -sti01cj2-jpg   -sti03em5-jpg   -sti07pr5-jpg  
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  35. 01-15-2010, 11:47 PM #35
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    man thats ugly

    Send me your champion now, she doesnt need to be hanging around those 2011s, makes her feel 100 years old or somthing haha.
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  36. 01-15-2010, 11:49 PM #36
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    haha.. its not made it here yet.. i am dissappointed. anywho.. it will be in your hands sooner than you think.

    i can put you on a payment plan,haha. i am supposed to be trading for a lightweight champion on monday. if it goes through its yours.. haha.
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
  37. 01-16-2010, 04:24 PM #37
    WickedIXMR
    WickedIXMR is offline
    Senior Member
    Join Date
    Aug 2006
    Posts
    3,057
    Rep Power
    24

    Default

    Quote Originally Posted by Truegiant View Post
    CBOB PORN
    God that 1911 is so damn nice. Do you have anymore info on the gun? Where I can get one exactly like it? I searched some classic bobtails and all of them have different grips and different markings on the slide. Couldn't find any like the one posted.
    Reply With Quote Reply With Quote
  38. 01-16-2010, 05:17 PM #38
    ueyedgr8tness
    ueyedgr8tness is offline
    Senior Member ueyedgr8tness's Avatar
    Join Date
    Jul 2006
    Location
    buford ga
    Age
    39
    Posts
    4,685
    Rep Power
    29

    Default

    http://www.stiguns.com/
    I check sluts off my list like a maintnence man
    I drive a low is3 just so it gives me a reason to drive super slow on these rough ga roads.
    Reply With Quote Reply With Quote
  39. 01-16-2010, 06:32 PM #39
    Danny
    Danny is offline
    bang Danny's Avatar
    Join Date
    Sep 2003
    Location
    Smyrna
    Age
    40
    Posts
    4,628
    Rep Power
    27

    Default

    Quote Originally Posted by WickedIXMR View Post
    God that 1911 is so damn nice. Do you have anymore info on the gun? Where I can get one exactly like it? I searched some classic bobtails and all of them have different grips and different markings on the slide. Couldn't find any like the one posted.
    CBOB is by dan wesson.
    http://cz-usa.com/products/view/dan-...assic-bobtail/
    "The 1911 is a collection of subsystems that must work together. Each part must be prepared and fit properly not only in and of itself, but also with regard to the other parts with which it must operate for the gun to function and appear as desired."
    Reply With Quote Reply With Quote
  40. 01-16-2010, 11:19 PM #40
    Truegiant
    Truegiant is offline
    King of the Mountain Truegiant's Avatar
    Join Date
    Mar 2005
    Location
    Savannah
    Posts
    2,142
    Rep Power
    23

    Default

    I found a lightweight. I will check over the champion when it comes in. Danny let me know if you have any interest at all in it. I would rather build the lightweight and I think I have my shotgun and custom 17 sold so a bbq gun is in the near future as well.

    Leaving at 6am to go pick up a truck in south carolina and then off to help a buddy finish up putting hardwood floors in his house. Oh jOy!
    Only two men ever offered to die for you, Jesus Christ and the American Soldier. Defend your rights or lose them forever.
    Reply With Quote Reply With Quote
Page 1 of 7 12345 ... LastLast
« M&P45C for $415 | Looking for a new rifle. Suggestions? »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!