You think this hole for a head stud will hold? Its threaded nicely, i had to hammer my threading tool in the hole then thread so the threads are there. I screwed the stud in but im curious as to if it will stay under normal driving conditons.
If you work on cars answer here........
You think this hole for a head stud will hold? Its threaded nicely, i had to hammer my threading tool in the hole then thread so the threads are there. I screwed the stud in but im curious as to if it will stay under normal driving conditons.
it doesnt look like it cause the thread is near the edge of the hole, so it'll look like it'll crack. i hope it doesnt. but that has happened to me before.
thats what i was thinkin, but i drilled the hole a little deeper so the threads actually go a little further down from that crack. Rockers have a vertical movement so im curious as to wat will happen.
well try it out and then if it doesnt hold make another hole
another hole? Shit where could i possibly make another hole, its a head for God's sake!!!LOLOriginally Posted by Daniel
awwww fuck it ill just go get another head. DAMN IT, cars sucks, this shit wouldnt happen on a honda i can tell u that much!!!
why did i even let an asian try to answer my ? bout an american car...........sheesh
Have the hole welded fully. Then Retap the hole at a machine shop. That is the best way to be sure no more of the mount cracks off leaving metal chuncks in your motor.
Scott
2009 F-150 SC
2011 Chevy Camero LT2
2007 Yamaha R1
2009 Harley Davidson Softail Night Train (Sold)
1991 Bayliner Ciera 2655 SunBridge (Sold)
2008 R32 (Sold)
2001 Golf "Orig BTERCAR" (Sold)
2004 350z "Purevil" (Retired/Sold)
TeamECI forever!
got any idea how much that would cost, cuz a new head is like 300+???
i would say around 100-200 if that bucks to weld then tap it again
not too bad, i didnt even know they could do that with cast iron.
its very hard to get the weld to stick perminently. i've had experiences trying to get it to work and couldn't. good luck though.
well it looks like they are saying to weld the crack and weld the hole up to and redrill it, so it should workout pretty good..............i hope. Anyone know of any good affordable machine shops?
im pretty sure that wont hold, and the casting looks shot, i would just get a new head or a reman head
if you need help let me know with a pm i might know some guys i could get you a deal with
You only live once, maybe twice if you use the e-brake!
^^^werd .... ricky's the guy that knows how to get things.
2001 Honda Prelude Base model
http://www.cardomain.com/id/twkg2001
everyone loves a lil head but honestly man.... you're gunna need a new one...
buy a new head. dont waste any money on that one its not worth i. its cast iron probaly cost about the same.
1994 s10(daily grind)
1989 civic si(project)
Posting Permissions
Reply With Quote
