View Poll Results: Good idea?

Voters
9. You may not vote on this poll
  • Yes

    4 44.44%
  • No

    5 55.56%
Results 1 to 24 of 24

Thread: Good idea or bad idea?

  1. #1
    The Other White Meat gijoe0720's Avatar
    Join Date
    Jun 2005
    Location
    Trion, Ga
    Age
    38
    Posts
    7,889
    Rep Power
    28

    Default Good idea or bad idea?

    I have an 06 raptor 700r that I don't really ever ride anymore and couldn't sell it for what i owe since it has been wrecked a few times. I decided that I am goin to take the motor and transmission out(both still good) and sell them. Then I am goin to get either a gsxr 1000 or yamaha r1 motor and put it on there and stretch it and just race it. I just looked on ebay and saw a raptor motor for around 2500 dollars and found crotch rocket motors for around 1500. I figured I would put mine up for around 1500-2000 dollars. Also I will be able to do all the fabricating and wiring for the motor to work.

  2. #2
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    yet you wrecked it before, but now u wanna put a gsxr 1000 or yamaha r1 motor in it? i say install it and then drive off a cliff

  3. #3
    The Other White Meat gijoe0720's Avatar
    Join Date
    Jun 2005
    Location
    Trion, Ga
    Age
    38
    Posts
    7,889
    Rep Power
    28

    Default

    Quote Originally Posted by LS2_KID
    yet you wrecked it before, but now u wanna put a gsxr 1000 or yamaha r1 motor in it? i say install it and then drive off a cliff
    Well my friend wrecked it once by hittin a curb at around 40 mph and it started flippin down a gaurd rail about 25 feet. Messed it up pretty bad but he replaced everything but the plastic.

    I was doin a wheelie at about 55 mph and it came back to far and my back bar was broke and i came off the back of it and it rolled into a ditch and melted the front fender a little bit.

  4. #4
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    Quote Originally Posted by gijoe0720
    Well my friend wrecked it once by hittin a curb at around 40 mph and it started flippin down a gaurd rail about 25 feet. Messed it up pretty bad but he replaced everything but the plastic.

    I was doin a wheelie at about 55 mph and it came back to far and my back bar was broke and i came off the back of it and it rolled into a ditch and melted the front fender a little bit.
    1. re-read my post
    2. exit thread with dignity

  5. #5
    The Other White Meat gijoe0720's Avatar
    Join Date
    Jun 2005
    Location
    Trion, Ga
    Age
    38
    Posts
    7,889
    Rep Power
    28

    Default

    Don't be mad that I will have a four wheeler which will outrun your dads slow overpriced piece of shit chevy. And have alot less in it too.
    Last edited by gijoe0720; 09-04-2007 at 03:55 AM.

  6. #6
    Stops the Resistance 81911SC's Avatar
    Join Date
    Oct 2006
    Posts
    12,599
    Rep Power
    44

    Default

    Are you sure it will all fit? What about all the custom fab?

  7. #7
    look here, bish Stormhammer's Avatar
    Join Date
    Jul 2005
    Location
    Lawrenceville, GA
    Age
    38
    Posts
    9,288
    Rep Power
    35

    Default

    ehhh.... I would say its a bad idea, you might get yourself into something deeper than what you have previously envisioned it being, and end up having it cost $$$$$$$$$


    ̿' ̿'\̵͇̿̿\з=(•̪●)=ε/̵͇̿̿/'̿'̿ ̿

  8. #8
    HAYYYYYYYYYYY hydroshutter's Avatar
    Join Date
    Jan 2006
    Location
    Atlanta
    Posts
    2,819
    Rep Power
    23

    Default

    Quote Originally Posted by gijoe0720
    Don't be mad that I will have a four wheeler which will outrun your dads slow overpriced piece of shit chevy. And have alot less in it too.
    Oh snap!

    Listen here Booster, e-thugging with a FOUR WHEELER is some of the lamest shit you can indulge us with.
    Quote Originally Posted by jerseyef9
    lol okay so your butt hurt no lmao that great i wasn't bashing you lol what a dumbass.

  9. #9
    MOST HATED
    Join Date
    Jun 2007
    Location
    Upstate SC/ATL
    Posts
    9,904
    Rep Power
    36

    Default

    Quote Originally Posted by hydroshutter
    Oh snap!

    Listen here Booster, e-thugging with a FOUR WHEELER is some of the lamest shit you can indulge us with.


    LMFAO

  10. #10
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    and i was just jerking this fool's chain... and ur right my dad AND i own the car, yes i'm still paying for it..

    sure you can beat me in a straight line, but lets go to a road course, maybe you'll flip a few times and snap your worthless spine

  11. #11
    The Other White Meat gijoe0720's Avatar
    Join Date
    Jun 2005
    Location
    Trion, Ga
    Age
    38
    Posts
    7,889
    Rep Power
    28

    Default

    Quote Originally Posted by LS2_KID
    and i was just jerking this fool's chain... and ur right my dad AND i own the car, yes i'm still paying for it..

    sure you can beat me in a straight line, but lets go to a road course, maybe you'll flip a few times and snap your worthless spine

    I would run your car right now on a road course. That would be alot easier than in a straight line for me. I got bald tires so i would just slide around the curves.

    And I ain't e-thuggin with a four wheeler. If he wants to talk some shit I will talk shit back. I think it would be a close race between my four wheeler and a corvette in the 1/8 if the corvette is supercharged. My buddys TA only beat my time by .2 seconds and he has a 150 shot on it.

  12. #12
    Banned
    Join Date
    Oct 2006
    Location
    Atlanta
    Age
    38
    Posts
    3,564
    Rep Power
    0

    Default

    sounds like a brilliant idea, get on that asap so we don't have to see another post out of your dodo brain.

  13. #13
    Banned
    Join Date
    Oct 2006
    Location
    Atlanta
    Age
    38
    Posts
    3,564
    Rep Power
    0

    Default

    Quote Originally Posted by gijoe0720
    I would run your car right now on a road course. That would be alot easier than in a straight line for me. I got bald tires so i would just slide around the curves.

    And I ain't e-thuggin with a four wheeler. If he wants to talk some shit I will talk shit back. I think it would be a close race between my four wheeler and a corvette in the 1/8 if the corvette is supercharged. My buddys TA only beat my time by .2 seconds and he has a 150 shot on it.

    you have a bike, it weighs less than a 1,000... well 1500 with you on it.. but seriously, who CARES if a bike can beat a car... anyone can beat a car on a bike.. stand tall chump, you've managed to do what only a few million other people are able to do everyday.


    CONGRATULATIONS! you're mediocre.

  14. #14
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    Quote Originally Posted by gijoe0720
    I would run your car right now on a road course. That would be alot easier than in a straight line for me. I got bald tires so i would just slide around the curves.

    And I ain't e-thuggin with a four wheeler. If he wants to talk some shit I will talk shit back. I think it would be a close race between my four wheeler and a corvette in the 1/8 if the corvette is supercharged. My buddys TA only beat my time by .2 seconds and he has a 150 shot on it.



    well you're shit talking abilities suck, try again, and next time don't take it seriously... have fun with the bike motor in ur 4-wheeler, sounds like u couldn't handle the regular power so why not add more

  15. #15
    IA's Slowest V6 Alan®'s Avatar
    Join Date
    Sep 2005
    Location
    Dunwoody
    Age
    36
    Posts
    12,819
    Rep Power
    37

    Default

    OWNED
    Quote Originally Posted by Alan®
    Nah not even. theres not enough alcohol on the planet that would convince me to bang that chick.I wouldn't hit that with Magic Johnson's dick.....on second thought
    Epic Foxbody Thread Crew Member #10

  16. #16
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    yes i agree with the above

  17. #17
    Athens OG Double_0_Rusty's Avatar
    Join Date
    Sep 2006
    Location
    Athens
    Age
    38
    Posts
    10,706
    Rep Power
    37

    Default

    LS2_KID is wild'n out.
    2013 Dart 1.4T 6MT

    boooooostin'

  18. #18
    Senior Member | IA Veteran  OneSlow5pt0's Avatar
    Join Date
    Nov 2006
    Location
    Buslengths behind you
    Age
    37
    Posts
    13,406
    Rep Power
    36

    Default

    Whoop his ass seabass

  19. #19
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    /bow

    *with the song "do ya dance on dat hoe" in the back ground

  20. #20
    The Other White Meat gijoe0720's Avatar
    Join Date
    Jun 2005
    Location
    Trion, Ga
    Age
    38
    Posts
    7,889
    Rep Power
    28

    Default

    Quote Originally Posted by kayfuNk
    you have a bike, it weighs less than a 1,000... well 1500 with you on it.. but seriously, who CARES if a bike can beat a car... anyone can beat a car on a bike.. stand tall chump, you've managed to do what only a few million other people are able to do everyday.


    CONGRATULATIONS! you're mediocre.

    I don't have a bike dumbass. I have a fuckin four wheeler which isn't anywhere near 1500 pounds. Try 550 with me on it.


    And about me not bein able to handle the power, I only wrecked it once since I got it. I used to ride it every day. I think that is pretty good.

    With the crotch rocket motor I can still go out and ride like I normal would or I could go race these fuckers in Alabama who think theres is the shit cause it runs high 11's.

  21. #21
    IA LEGEND #truth Brett's Avatar
    Join Date
    Aug 2001
    Location
    Charlotte, NC
    Age
    53
    Posts
    67,792
    Rep Power
    121

    Default

    ~looks in thread~

    ~shakes head~

    ~leaves~
    Brett (One of the true OG's, No really... ask anyone)
    '15 Chevy SS
    '16 K7 SXL SWP

    www.facebook.com/brett.lowenthal1

    R.I.P Leisa, You are never forgotten - 10/7/08

  22. #22
    The Other White Meat gijoe0720's Avatar
    Join Date
    Jun 2005
    Location
    Trion, Ga
    Age
    38
    Posts
    7,889
    Rep Power
    28

    Default

    Why do what everyone else does? Why not be different? Hell it ain't hurting anything. It will be faster and I may actually be able to make some money by doin this. The fabrication will be easy. Weld on some motor mounts maybe extend the frame a little. My cousin can do all that. The wiring I could do no problem. I guess bein original doesn't cut it anymore. You have to do what everyone else does.

    Right now I am building a bagged dodge dakota. I could have gotten an s-10 or nissan and it would have been cheaper and alot easier but I didn't cause there are to many of them. You don't see many bagged dakotas. Hell I even have a carb. 360 to go into it and it is a 97 but I don't care. I don't like bein like everyone else.

  23. #23
    C7 On_Her_Face's Avatar
    Join Date
    Jun 2005
    Location
    Duluth
    Age
    37
    Posts
    13,938
    Rep Power
    52

    Default

    dude CHILL OUT.. i was joking around busting ur balls. i'm not down with bagged cars just cause they arn't my cup of tea, there are my props happy?

  24. #24
    Banned
    Join Date
    Oct 2006
    Location
    Atlanta
    Age
    38
    Posts
    3,564
    Rep Power
    0

    Default

    Quote Originally Posted by LS2_KID
    dude CHILL OUT.. i was joking around busting ur balls. i'm not down with bagged cars just cause they arn't my cup of tea, there are my props happy?

    +1

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!