Results 1 to 2 of 2

Thread: YEAR, MAKE, MODEL, ETC- $PRICE

  1. #1
    Fuhgettaboutit. OhMyGodfather's Avatar
    Join Date
    Apr 2008
    Location
    Georgia
    Age
    35
    Posts
    441
    Rep Power
    17

    Thumbs up 1997 Nissan 240sx - Stanced and Fast!

    1997 Nissan 240sx, authentic Kouki front end and tail lights from factory. Limited production of these cars were made. Even fewer contain the SR20DET from Japan as well. Widebody kit, vented hood, Sparco seats and Steering wheel, tons of bolt-ons for the motor, and some really sweet suspension pieces as well. Parts for this vehicle cost roughly $15,000 alone. This is a serious and mature build, no shortcuts! This car was originally built to compete in Formula D Pro Am and Pro 2 drifting series, but the concept was disregarded after a new partnership with a company brought the team a new car to run for the 2015 season instead. Car passed emissions Summer of 2014. Please read ad thoroughly and watch videos before texting me questions! The car has heat, but not A/C (Think racecar origins) The asking price is $9,700 and will only be interested in trades of clean titled vehicles that are worth the same amount or higher in resale value! Subaru STi, Mitsubishi Evo, Cadillac CTS-V, Diesel trucks. Please no trades for furniture, appliances, firearms, motorcycles, dirt bikes, ATVs, weekend with your ugly girlfriend... NOTHING. This car was featured at NOPI Atlanta at the Drift Emporium booth next to their Blue Metallic FRS. I do not need help selling. Call or Text J.J. at 678.382.THREE.EIGHT.ONE.FOUR

    Videos:
    Overview of the car in detail: https://www.youtube.com/watch?v=UifzF_L30qE

    Couple laps after the tune fooling with the drifting ability of the car: https://www.youtube.com/watch?v=a-tsR1rlUQM
    Side note: It was low on fuel hence the sputter on a really hard right turn (fuel sloshes away from the fuel pump momentarily)

    Chassis:
    -1997 Chassis with clean title
    -Front end has been tube converted for rigidity and lighter weight
    -Bash bar included in front for lightweight and strength against impacts to protect intercooler and radiator.
    -Rear subframe bushings have been replaced with Stance solid drop bushings to lower car while maintaining proper suspension geometry.

    Motor:
    -1997 Blacktop S13 SR20DET
    -ARP Headstuds
    -Apex`i Headgasket
    -Brian Crower Titanium Springs and Retainers
    -Apex`i Rocker Arm Stoppers
    -Rebuilt OEM spec bottom end with ACL Race bearings
    -ISIS Greddy style intake manifold
    -Five5-0 550C injectors
    -Full large intercooler kit
    -HKS Blow off valve
    -Garrett GT2871R .64AR built at Batlground Engineering in Marietta, Georgia
    -ISIS v3 tubular manifold
    -Stainless Steel turbo oil and coolant lines
    -3" turbo elbow and downpipe
    -3" Test pipe
    -3" ISIS dual tip stainless exhaust
    -SPEC Stage 4 clutch (less than 500 miles on it)
    -SPEC light weight flywheel
    -B&M Short shifter
    -Aluminum accessory pulleys
    -Mishimoto 3" dual core radiator and dual electric fans
    -Oil catch can
    -Minor wire tuck in engine bay
    -Walbro 255 fuel pump
    -Nissan 300zx fuel filter
    -Nissan 300zx MAF
    -ISIS high capacity oil pan

    Suspension:
    -Stance coilovers
    -Tein inner and outer tie rods
    -Ikeya Formula front tension rods
    -ISIS Rear upper control arms and traction rods
    -Megan Racing rear toe arms
    -Custom front drop knuckles
    -Extended lower control arms
    -36mm front anti-sway bar
    -Driftworks offset steering spacers

    Exterior:
    -DMax vented hood
    -JDM Nissan OEM K's front bumper
    -JDM K's style front front lip
    -JDM Navan side skirts
    -JDM Nismo R rear bumper
    -50mm front fenders
    -30mm rear over fenders
    -DMax rear trunk wing
    -Included but not installed in photos: DMax rear roof wing, JDM front window rain guards, and oem silvia grille

    Interior:
    -Sparco Evo Plus seats with Sparco fixed rails
    -Sparco 360mm Blue Alcantara steering wheel
    -Tomei Shift knob
    -Autometer Boost, Water temperature gauges
    -AEM wideband gauge
    -Alpine stereo with auxiliary and iPhone input
    -Micro USB charging cable implemented to cup holder
    -Black suede roof and black carpet
    -Back seats are 97 SE "Confetti" cloth
    -Anodized blue Drift Button on handbrake
    -Apex`i Super AFC Neo piggyback tuning unit
    -30% Tinted windows
    -NASCAR style rear view mirror

    Wheels:
    -Varrstoen ES 3.3.1 Volk CE28N Casting
    -Fronts: 18x9.5J -33 offset (spacers) with Dunlop Direzza 235/40/18 80% tread
    -Rears: 18x10.l5J -30 offset (spacers) with Federal SN595 245/40/18 75% tread
    -Wheels are covered in DipYourCar.com's Matte Bronze finish
    -Circuit Sports 19mm aluminum racing lugnuts anodized blue color






    Last edited by OhMyGodfather; 09-22-2014 at 09:12 PM. Reason: Edit Title of Thread

  2. #2
    Fuhgettaboutit. OhMyGodfather's Avatar
    Join Date
    Apr 2008
    Location
    Georgia
    Age
    35
    Posts
    441
    Rep Power
    17

    Default

    Deposit received, pending sale.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!