I found something else I wanna buy so I'm parting ways with my skyline I just finished up. I have a 1994 R33 Skyline GTS-T with a fully built RB25 on a Garrett GT2871R making 402whp. The chassis has approx 70000KM on it and the motor has about 12000KM, motor runs perfect. The body has the full front GT-R widebody conversion including front bumper, fenders, and rear spoiler, and a custom rear 50mm wider-than-stock GTR rear fenders. The car is fitted with a weld in 6pt roll-bar/cage. I have included a full mod list below. The car is legally titled and registered in the state of Georgia.


My asking price is $23,999


CAR NO LONGER COMES WITH PICTURED WHEELS, BUYER MUST PROVIDE THEIR OWN WHEELS.


ENGINE
- RB25 Block fully blueprinted
- Wiseco 9:1 compression pistons
- RB26 Connecting Rods
- Top Hat Performance T3 Top Mount Manifold
- Garrett GT2871R Ball Bearing Turbo
- Stainless Oil/Water Turbo Lines
- Synapse 38mm Wastegate
- HKS SSQV Blow Off Valve
- HPI Front Mount intercooler
- Greddy Timing Belt
- N1 Water Pump
- N1 Oil Pump
- Greddy Intake Manifold
- Greddy Radiator
- Custom Catch Can
- Apexi Metal Headgasket
- Competition Stage 4 Clutch
- 1 piece driveshaft
- Cusco 2 Way Diff
- Custom Intercooler Piping
- Custom Air Ducts that goes straight to the intake filter
- Z32 Mass Air Flow Sensor
- SARD 650CC Fuel Injectors
- Walboro 255lph Fuel Pump
- Q45 Throttle Body
- Custom 3" Downpipe
- Custom 3" Exhaust

INTERIOR
- Custom Cage/Roll bar 6pt (does not go past the front seats)
- REAL Authentic Bride Brix with Gradation drivers seat
- Momo Steering Wheel
- R33 GTR Door Panels
- Pioneer MP3/CD Headunit
- Gauge Cluster is modded to read in MPH but can reversed back to kph if wanted
- Greddy Shift Knob
- Cusco E-Brake Handle

WHEELS/SUSPENSION
- HKS Hipermax Performer Coilovers
- Cusco Front Upper Control Arms
- Megan Racing Tension Rods
- Cusco Front Strut Bar
- Cusco Brake Master Cylinder Stopper
- HICAS Eliminator Bar

ELECTRONICS
- Apexi Power FC Standalone Engine Management w/ Commander

EXTERIOR
- PPG Obsidian Black Pear Base Coat
- House of Kolors Gold Pearl Coat
- Custom 50MM Widebody Rear Fenders
- Paint still needs to be cut and buffed
- Custom Rear Valances
- Custom Rear Diffuser
- R33 GTR Rear Spoiler
- R33 GTR Aluminum Front Fenders
- R33 GTR Front Bumper
- R33 GTR Side Skirts
- R33 GTR Aluminum Hood
- R33 GTR Grill
- Carbon Fiber JN Style Front Lip
- Rare R33 GTR Light Up Rear Skyline Garnish
- Madico Onyx 20% Tint All Around

Car currently needs a windshield because the one on the car is cracked, car has no headliner or A-pillar covers but I can get them if the buyer really wants them. Car has no A/C but can be put back in, but does have power steering. Paint needs to be cut and buffed. The front bumper took a bit of damage when a tire on the hwy, pictures of damage shown below.

If you have any questions please feel free to Call/Text me at 404-216-2009, or just send me a PM on here...


How the car currently sits.

Just to give an idea how wide the car is the wheels that are pictured are 18x8.5 +33 and 18x9.5+20.










Mini-Feature in the January 2011 issue of Super Street




These are the pictures of the car when it still had the wheels they were
18x8.5 -14
18x10.5 -22

























This is the custom front tube framing that replaced the weak factory front radiator support


And this is the custom aluminum air duct that goes straight up to the intake



Here are the interior pictures







Pictures of the cracked windshield and bumper damage