Results 1 to 12 of 12

Thread: FS: BUILT!!!!!!!!! 1995 Honda 300EX

Threaded View

  1. #1
    Let the Motha burn Turbodude06's Avatar
    Join Date
    Jan 2006
    Location
    Where Am I
    Age
    36
    Posts
    4,403
    Rep Power
    24

    Default FS: BUILT!!!!!!!!! 1995 Honda 300EX

    This is a friend of mine, if u have any questions about it you can PM EKHotch about it cause its his, all I know is this thing runs great and is pretty fast too, you will not be disappointed.......

    Up for sale is a 1995 Honda TRX300EX 4-wheeler. awesome running four wheeler. has scratches on the plastics but nothing serious. There is one rip in the plastic on the headlight cover. Every thing works fine, including the neutral and reverse lights.
    On to the good stuff

    He built the engine him self not too long ago, this is what he wrote to me so here's everything.......This engine is 340cc's. I had the old sleeve removed from the cylinder, the cylinder bored out, and a new thicker sleeve pressed in. I didnt just bore the old cylinder out. It has a "Powroll" High compression piston and Powroll Woods mid-range cam with titamium valve springs and caps and retainers. I lapped the valves, replaced the valve stem seals, as well as the cam bearings and the timing chain and upper cam sprocket. It has a Supertrapp exhaust, Uni Filter air filter and I completely jetted the carb. The engine in this quad only has about 40 hours running time since I rebuilt it, and it is very torquey. The bike also has titanium clutch springs and performance(I can't remember what brand...I think Hinson)clutch discs, and I went down one or two teeth on the drive sprocket to gear it down. It has new bearings all the way around. It also has DG Nerf bars, DG grab bar, Renthal handle bars and a twist throttle. The front tires have about 90-95% tread left...but the rear tires don't have much tread left. That's just about everything I can think of now. I can e mail more pics to serious buyers. I am asking $2000 OBO
    If you have any questions, you can PM me(EKHotch)or call me at 770-633-8923(Taylor)...please leave a message if he doesn't answer.

    Now for the pictures









    Last edited by Turbodude06; 11-14-2007 at 07:01 AM.
    -If You Own A Honda And Say "Headers", Go Jump Off Bridge...........


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!