Results 1 to 13 of 13

Thread: 1995 Eagle Talon AWD Precision SC61 DSMLink etc

  1. #1
    Certified Gearhead froggie3kb's Avatar
    Join Date
    Apr 2005
    Location
    Rossville, GA
    Age
    39
    Posts
    313
    Rep Power
    20

    Default 1995 Eagle Talon AWD Precision SC61 DSMLink etc

    Best form of contact is by email- [email protected]


    1995 Eagle Talon AWD (All-Wheel Drive) Turbo
    Price - $1,800
    VIN - I'll have those details when I go to lunch here in a few.
    Miles - 138,749
    Body - In the pictures the car is very dirty but you can tell how straight the body is. And the paint is in very very good condition for its age, not faded or anything like that.
    Title - Clean and in hand
    Transmission - Manual
    Location - Chattanooga, TN


    I'll try to remember all of the mods but some things I have forgotten unless I'm staring at it writing them down.

    Mods---
    DSMLink
    Precision SC61 turbo (scm6152e)
    770 injectors
    Walbro 255
    Forced Performance stage 2 cams
    Apexi n1 3" exhaust with 3" downpipe
    HKS SSQV Blow off valve
    Greddy Profec Type S electronic boost controller
    FPR
    ACT clutch/flywheel
    FMIC
    I'm sure I am forgetting some stuff.


    Now to the bad part...

    Had a SBR 2.3l stroker setup in the car and now the bottom end is toast. I've got waaaay to many projects going on right now to give this build the time and effort it deserves and plus I've got a baby due on July 24th so add that in with everything else and my time is sadly limited and this thing is just collecting dust.

    Good...

    The engine is currently out of the car as it's sitting at my buddies shop waiting on me to get the rest of the goodies to finish her. So the tedious task of pulling the engine is already out of the way for you.










    Last edited by froggie3kb; 08-12-2011 at 09:28 AM.

  2. #2
    Supuh Man dAT HOE! IggyBcool's Avatar
    Join Date
    Nov 2006
    Location
    Cleveland, Tennessee
    Age
    36
    Posts
    259
    Rep Power
    18

    Default

    Finally getting rid of Ryans old car eh?
    | 02 Acura RSX Type-s DSM. Stockish |
    | 08 Kawi Green ZX10r not so stockish |

  3. #3
    Certified Gearhead froggie3kb's Avatar
    Join Date
    Apr 2005
    Location
    Rossville, GA
    Age
    39
    Posts
    313
    Rep Power
    20

    Default

    Quote Originally Posted by IggyBcool View Post
    Finally getting rid of Ryans old car eh?
    Sadly yeah. Had the engine pulled ready to put a new bottom end etc in it but then came across a steal on another bike so that build has been keeping me occupied and stealing my money haha. Then add in the baby that'll be here any day now and I just don't have the time to mess with this right now so figured I'd get rid of it. Quite depressing though as I was really looking forward to getting this beast back up and going. And it's hard to find an awd body this clean but oh well I guess .

    I'll toss some $$ your way if you know anyone that might be interested cough cough and price is negotiable.

  4. #4
    1/2 Fast Motorsports highspeed's Avatar
    Join Date
    Sep 2006
    Location
    Gardendale AL
    Age
    42
    Posts
    814
    Rep Power
    18

    Default

    So is there a price? is it a 6 bolt block?

    What happened to it.........in order to blow a SBR stroker?


  5. #5
    Certified Gearhead froggie3kb's Avatar
    Join Date
    Apr 2005
    Location
    Rossville, GA
    Age
    39
    Posts
    313
    Rep Power
    20

    Default

    Quote Originally Posted by highspeed View Post
    So is there a price? is it a 6 bolt block?

    What happened to it.........in order to blow a SBR stroker?
    I'm sorry somehow I forgot to put a price in the listing when I copy/pasted it over. $2,500 OBO

    Haha yeah I wondered the same thing. I personally didn't do the damage, a friend of mine did and I bought the aftermath.

  6. #6
    Supuh Man dAT HOE! IggyBcool's Avatar
    Join Date
    Nov 2006
    Location
    Cleveland, Tennessee
    Age
    36
    Posts
    259
    Rep Power
    18

    Default

    From what I was told the night that they got it back together they did a pull and the boost controller wasn't hoocked up and wasn't tuned and DSMlink logged like 37psi and well... 37psi on an untuned motor that only had like 10 miles on it..
    | 02 Acura RSX Type-s DSM. Stockish |
    | 08 Kawi Green ZX10r not so stockish |

  7. #7
    1/2 Fast Motorsports highspeed's Avatar
    Join Date
    Sep 2006
    Location
    Gardendale AL
    Age
    42
    Posts
    814
    Rep Power
    18

    Default

    Ok so a rod knock? Piston rings? rod through the block?

    Sorry to keep asking but I may.........or may not be interested?

    PM me for more details.


  8. #8
    Certified Gearhead froggie3kb's Avatar
    Join Date
    Apr 2005
    Location
    Rossville, GA
    Age
    39
    Posts
    313
    Rep Power
    20

    Default

    Quote Originally Posted by highspeed View Post
    Ok so a rod knock? Piston rings? rod through the block?

    Sorry to keep asking but I may.........or may not be interested?

    PM me for more details.

    Rod knock to my understanding, I never heard the engine run to hear the issue at hand. The engine is out and disassembled for the new owner to take a peek at things and go from there. Head etc is fine. Slap a bottom end in it and go.

    PM returned.

  9. #9
    Certified Gearhead froggie3kb's Avatar
    Join Date
    Apr 2005
    Location
    Rossville, GA
    Age
    39
    Posts
    313
    Rep Power
    20

    Default

    Don't be afraid to shoot me an offer.

  10. #10
    Unknown
    Join Date
    Jan 2007
    Age
    39
    Posts
    1
    Rep Power
    0

    Default

    Lol none of that story is true iggy. I was driving the car across town after changing the oil and it started making a slight noise. I parked it and never drove it personally again. I sold it to a mutual friend of mine and Kevin who did apparently drive it but I doubt the dsmlink was hooked up seeing as how he never had the software. He took it to a shop to look at it, what they did I have no.clue. Don't spread stupid rumors, you should know I am not stupid enough to attempt what your story says.

  11. #11
    Certified Gearhead froggie3kb's Avatar
    Join Date
    Apr 2005
    Location
    Rossville, GA
    Age
    39
    Posts
    313
    Rep Power
    20

    Default

    Big price drop, need it gone ASAP.

  12. #12
    IA Member
    Join Date
    May 2010
    Posts
    16
    Rep Power
    0

    Default

    Do you have any pics of the interior?

  13. #13
    Certified Gearhead
    Join Date
    Jun 2006
    Age
    40
    Posts
    172
    Rep Power
    0

    Default

    Very much interested in this car you have a pm and an email. get in touch with me asap!
    So then we ask ourselves are we just fucking stupid!? questioning our failures

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!