considering buying an FC

**kain** · 08-06-2010, 01:08 PM

atf breaks down rubber seals.

Originally Posted by Boosted FC

Ummm, so what about a Meet guys?

i have no school tuesday. wanna meet up after you get off from work someplace close like mellow mushroom?

**JITB** · 08-06-2010, 02:28 PM

Atf is used to start motors that have been sitting for along time. Poured into the cylinders/housing is supposed to restore compression for those first starts.

**Boosted FC** · 08-06-2010, 03:26 PM

Originally Posted by kain

atf breaks down rubber seals.

i have no school tuesday. wanna meet up after you get off from work someplace close like mellow mushroom?

I would, but I do not drive the FC during the week.

**Boosted FC** · 08-06-2010, 03:27 PM

Originally Posted by JITB

Atf is used to start motors that have been sitting for along time. Poured into the cylinders/housing is supposed to restore compression for those first starts.

Isn't Wiki & Google great? lol

**rmeyer114** · 08-06-2010, 04:01 PM

what whereabouts are you guys? tryin to find a job so i can get my insurance paid and get this thing tagged..sucks losing your temp job after u get a car.. and kain you think i should put that test pipe on that i got from adam? ...will it make it substantially louder? ... still tryin to get it quiet lol .. but dont really wanna run cats on it since i probably wont need emissions

**JITB** · 08-06-2010, 05:22 PM

Originally Posted by Boosted FC

Isn't Wiki & Google great? lol

yea it is, but ive done it plenty of times... used it to start the old 328 Diesel that sat for 5 years, and the 735 also. Used it also when i rebuild my ole protege motors.

**Boosted FC** · 08-06-2010, 11:22 PM

Originally Posted by rmeyer114

what whereabouts are you guys? tryin to find a job so i can get my insurance paid and get this thing tagged..sucks losing your temp job after u get a car.. and kain you think i should put that test pipe on that i got from adam? ...will it make it substantially louder? ... still tryin to get it quiet lol .. but dont really wanna run cats on it since i probably wont need emissions

I live in Dallas & work in Chamblee at the moment. Looking for something better & closer to the house.

**kain** · 08-07-2010, 08:41 PM

i want your job soo bad sheldon.

**Machado** · 08-07-2010, 09:09 PM

yup Sheldon you have a bad ass job. I told Paul if you guys ever need any help let me know, Im moving right down the street from there.

I didn't know you lived in dallas? we are practically neighbors.

**rmeyer114** · 08-08-2010, 12:02 AM

im not far from chamblee ...livin in snellville and buford one weekends

**kain** · 08-08-2010, 08:24 AM

Originally Posted by Machado

yup Sheldon you have a bad ass job. I told Paul if you guys ever need any help let me know, Im moving right down the street from there.

I didn't know you lived in dallas? we are practically neighbors.

really? as do i. there are tons of rotary people in chamblee including myself, so a meetup in that area would have an ok turnout.

**kain** · 08-08-2010, 08:26 AM

Originally Posted by Machado

yup Sheldon you have a bad ass job. I told Paul if you guys ever need any help let me know, Im moving right down the street from there.

I didn't know you lived in dallas? we are practically neighbors.

really? as do i. there are tons of rotary people in chamblee including myself, so a meetup in that area would have an ok turnout.

**rmeyer114** · 08-08-2010, 02:21 PM

well hopefully i get some insurance soon id be totally down for a rotary meet ....grr...need job...grrr

**Boosted FC** · 08-09-2010, 01:56 PM

lol, you guys may get your wish soon.

**rmeyer114** · 08-09-2010, 11:59 PM

my wish of insurance might come true soon im half tempted to goto the day laborer place and earn a quick few hundred

**kain** · 08-10-2010, 10:08 AM

elaborate. another mazmart meet?

**Boosted FC** · 08-10-2010, 10:11 AM

Originally Posted by kain

elaborate. another mazmart meet?

No. I was referring to you guys wanting to work @ Mazmart.

**JITB** · 08-10-2010, 11:30 AM

Tell paul to give me a opp sheldon I can handle the fwd mazdas, and 929s..

**rmeyer114** · 08-10-2010, 06:37 PM

man i wish i could score a job over at mazmart lol

**Boosted FC** · 08-11-2010, 06:56 AM

Originally Posted by rmeyer114

man i wish i could score a job over at mazmart lol

Yeah, everyone says that.

**rmeyer114** · 08-11-2010, 12:12 PM

hahaha..u get good discount up there?

**Boosted FC** · 08-11-2010, 01:03 PM

On what? That place don't have a fucking thing unless you own a Miata or Protege.

**rmeyer114** · 08-11-2010, 02:12 PM

oh damn for real?....wheres good places to go get 7 parts around here besides the internet !? maztrix is expensive as hell

**Boosted FC** · 08-11-2010, 02:14 PM

Bryn @ RX7Restorations

**rmeyer114** · 08-11-2010, 07:01 PM

gracieus wheres it at?

**VickNotic** · 08-11-2010, 07:14 PM

Originally Posted by rmeyer114

And yes still needs exhaust gaskets I scoped em out the other day and they're shot to the max...know where I can get center console trim and ash tray??and another mirror

I have a buddy that has a 88 or 89 rx7 motor is gone but jsut the shell with everything still in there, i think it' sbeen sitting in his backyard for like 2-3 years now. was planning on picking up the shell but i have no idea about rotary 8D and he's located in NC if anything lmk

**JITB** · 08-11-2010, 07:49 PM

Originally Posted by VickNotic

I have a buddy that has a 88 or 89 rx7 motor is gone but jsut the shell with everything still in there, i think it' sbeen sitting in his backyard for like 2-3 years now. was planning on picking up the shell but i have no idea about rotary 8D and he's located in NC if anything lmk

i need some parts!

**rmeyer114** · 08-12-2010, 10:09 AM

id like a better condition'd interior if i can find that...i just found out a buddy of mine has an s5 in mint body and interior condition in his garage that doesn't run ...i wanna scoop it off him

**JITB** · 08-12-2010, 11:16 AM

Let me scoop some parts from it...I got a lot of need

**Boosted FC** · 08-12-2010, 11:20 AM

Originally Posted by JITB

Let me scoop some parts from it...I got a lot of need

lol, you sure do. You need to come get those 4-piston Calipers from me

**kain** · 08-12-2010, 11:25 AM

Originally Posted by Boosted FC

lol, you sure do. You need to come get those 4-piston Calipers from me

wont help with braking. get a 97 subaru forrester brake MC and make a up a brace for it. said to be the best combo for the fc and the stopping power is perfect.

**Boosted FC** · 08-12-2010, 02:17 PM

Originally Posted by kain

wont help with braking. get a 97 subaru forrester brake MC and make a up a brace for it. said to be the best combo for the fc and the stopping power is perfect.

Oh really? You got this done yet?

**kain** · 08-12-2010, 09:38 PM

read up sheldon.

http://www.rx7club.com/showthread.php?t=852021

**rmeyer114** · 08-13-2010, 12:07 AM

buddy of mines wantin to do that to his 89 mx6

**Boosted FC** · 08-13-2010, 07:44 AM

Originally Posted by kain

read up sheldon.

http://www.rx7club.com/showthread.php?t=852021

Cool. I don't need to do that though....haha

**kain** · 08-13-2010, 11:09 AM

just do the brace though. youll feel the difference.

**rmeyer114** · 08-16-2010, 11:38 AM

gotta job now....insurance,mods,repairs, its on now !

**kain** · 08-16-2010, 01:44 PM

Originally Posted by rmeyer114

gotta job now....insurance,mods,repairs, its on now !

you have it backwards. its Insurance, repairs, mods.

**Boosted FC** · 08-16-2010, 02:17 PM

Originally Posted by kain

you have it backwards. its Insurance, repairs, mods.

lol, it is the truth though

**rmeyer114** · 08-16-2010, 10:20 PM

yeah i agree.im not much for organization of words lol..i gotta get this thing to pass emissions so i can get it tagged ..peter you know if this thing will pass emissions if i get the gaskets for exhaust? or am i going to have to go a little farther with it ?

Thread: considering buying an FC

Thread Tools

Display

Posting Permissions

About us

Announcement