Results 1 to 11 of 11

Thread: FS/FT - 84 RX7 GSLSE Roller with Rare Pacifica Widebody Kit

  1. #1
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default FS/FT - 84 RX7 GSLSE Roller with Rare Pacifica Widebody Kit

    Unfortunately, I have to abandon my widebody project, but other priorities take precedence at this time.

    It's a 84 GSLSE with approximately 67K on the chasis, a clean title, and hasn't ever been wrecked. It has ZERO wheel well rust and is a VERY structurally sound chasis that has never been wrecked and has a clean title. Most parts are there, just not currently installed. I hate to let it go, but I have to. It was black from the factory and has been primered flat black by a previous owner. The PO was running a carbed 13B with a big port job, so it's currently set up for a carb, but can easily be switched back to FI. The Pacifica kit needs a little fiberglass work and then you'd have an awesome platform for whatever route you choose.

    To ease with loading and transportation the springs have been elevated and the front bumper and lower lip have been removed.

    $1300 OBO

    May be interested in trades. Just let me know what you have.
    Attached Thumbnails Attached Thumbnails -dsc04451-jpg   -dsc04448-jpg   -dsc04444-jpg   -dsc04450-jpg   -dsc04452-jpg  

    Last edited by aws140; 08-19-2012 at 09:02 AM.

  2. #2
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    bump

  3. #3
    I Am, A Stunt Man
    Join Date
    Mar 2008
    Location
    Douglasville, Georgia, United States
    Age
    35
    Posts
    3,502
    Rep Power
    21

    Default

    looks like a fun project
    Quote Originally Posted by TheDrunkScotsman
    great steal , its like a sore dick ,ya cant beat it!

  4. #4
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    Thanks. It is a great platform. I just hate that I can't pursue it.

  5. #5
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    ***UPDATE***

    A friend and I recently spent a lot of time doing a lot of fiberglass and body work to the kit: bridged B pillar gap, filled cracks and pits, and "unmolded" fenders from side skirts. Just need to do some final sanding and filling and it'll be squared away and ready for paint.

    Also, I have a running GSLSE engine, harness, ECU, manifolds, etc. sitting in front of the car. It's essentially pretty much everything you need to swap in a running SE motor. I pulled it from a buddy's running car to swap in a ported 4 port into his SE.

    Due to the magnitude of the work performed, and my reduced lack of rush to sell, the price is back up to $1500 as is, or $2000 with the running engine package.

    I will eventually post updated pics.

  6. #6
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    Bump for a great Winter project to have ready for the Spring!

  7. #7
    f you couch
    Join Date
    Dec 2007
    Age
    37
    Posts
    658
    Rep Power
    17

    Default

    looks a lot like a 944!! and bump for a killer deal on a cool car

  8. #8
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    Updated pictures and information:

    Wide Body GSLSE For Sale

  9. #9
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    obo

  10. #10
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    ttt

  11. #11
    Mr.Wankel
    Join Date
    Oct 2008
    Location
    Marietta, GA
    Age
    36
    Posts
    11
    Rep Power
    0

    Default

    BRAP!!

    Leaving for Alaska in a month and need the garage space to store my 1979 RX7. Someone come get this great deal.

    I installed a new brake master cylinder a few weeks ago, but haven't bled the system. Too busy planning to drive to Alaska soon.



    $1200 as-is
    +$500 with motor, manifolds, wiring harness, etc.
    +$300 with full Racing Beat exhaust, header to muffler

    Will not sell the motor and exhaust separate, don't ask. If it doesn't sell, then I need them to install whenever I get back.



    Motivation:

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!