F/T 1996 Acura Integra JDM Front
I decided to see if I can get any interesting offers for my car. Please don't offer me junk. I am open to a lot of makes/models just nothing older than mid to late 90's. All the problems I've listed in the General Tech section recently have been taken care of and fixed. Headlights/city lights/fog lights/high beams/turn signals/side markers all work and function properly. Engine does not leak/burn oil at all. Block has never had any dripping oil down it. Put on new plug wires, fuel filter, spark plugs, valve cover gasket, clutch, flywheel, throwout bearing, and axles all in last 4 months.
WING IS GONE!
Trade Price: $5000 or so.
Make: Acura
Model: Integra GSR
Year: 1996
Mileage: Title says 118000, has an ITR cluster swapped in during the swap. I bought the shell in Feb of 2011, and I have daily driven it for a year.
Options: PW / PL / NO PS / NO A/C
Engine: b18b
VIN: JH4DC2385TS00xxxx
Condition: Mechanically sound. Paint is a little faded but no clear is coming off. A good wax every 2 months or so keeps it shining.
Mods:
Engine:
-Swapped JDM b18b I got from Tiger Japanese. Put the motor in back in Feb of 2011.
-Short ram intake I made out of intercooler piping and a filter I had in the garage.
-Ebay header/exhaust
-Spoon radiator hoses
Suspension:
-Cut Tein lowering springs. (Rides just fine)
-KYB Struts
-Blox front camber kit (recent alignment done)
-16x7 Rota Slips with 215/40/16 Tires
Interior:
-JDM ITR cluster
-ITR cup holders
-Alpine head unit
Exterior:
-JDM Si-r front end conversion
-JDM OEM ITR front lip
-Black housing headlights (did it myself see build thread)
-ITR sideskirts (don't know if they're OEM or not I've never taken them off)
-ITR rear valences (again don't know if they're real)
-98+ Red tail lights
-6k HIDs
-15% tint on all windows
Bads:
-Only CEL is for secondary o2 sensor. I will jump the ecu and pull out my haynes manual to confirm. Car is still OBD2a. (USDM LS ECU)
-ABS light is on because I took the fuse box for it out.
-SRS does not work due to the driver steering wheel being changed.
-No A/C
-No P/S (lines have been looped so if you wanna buy pump/lines/reservoir you could have it back)
-Couple of paint chips on front bumper nothing too horrible.
Build thread:
http://www.importatlanta.com/forums/...2-Build-Thread
Pics:
These were taken in Jan of this year.
Pics from today:
Reply With Quote
Originally Posted by 240sx_boi
