FT/FS Z6 swaped and Boosted 1990 CRX si
I'm wanting to sell or trade my olive green CRX. Looking for a street bike 600cc or bigger or $5000 OBO.
Don't know the mileage on the body due to it not having a cluster in it when I bought it.
Motor runs vary strong but is a bit noisy. Motor has around 1500 miles on it since rebuild. Motor smokes when you first start it when its cold. After it warms up the smoke goes away. I was told it was the valve steam seals cooling and shrinking. Then once they warm up and expand the smoking stops. I have the valve stem seals but haven't installed them.(never done them before) Motor is a bit noisy, Its not knocking but it is piston slapping,(that is what I was told it was. I've heard a knocking motor and this sound is different) It started about 150miles ago and hasn't gotten any louder.
Motor/fuel
D16Z6
every seal and gasket replaced (except valve stem seals witch I have)
scat H beam rods
JE 9:1 forged pistons
ACL race bearings
ARP head studs
75mm throttle body
450cc DSM fuel injectors
webro 255 fuel pump
HKS super mega flow air filter with prefilter(water resistant)
HF exhaust manifold
HF to TD05 adapter
TD05 14B turbo 10-12psi
Homemade 2.5" downpipe
2.5" strait pipe exhaust with flowmaster axle back
Ebay intercooler kit
real greddy type RS BOV
P28 ECU tuned with crome pro by mainstream performance
DX 5 speed transmission
polyurethane motor mounts (all 4 mounts)
odyssey pc680 battery mounted on the frame in front of the trans
Interior
black with red stitching Nopi racing seats
black with red stitching flat bottom aftermarket steering wheel with quick disconnect hub.
black with red stitching shifter boot
EG arm rest with black with red stitching cover
b&m short throw shifter
94 integra cluster
Boost, AEM wideband, and digital oil pressure gauges in triple a pillar pod
ebay turbo timer (works vary good)
Body
spray painted satin Italian olive green
roof, hatch and gas door painted satin black
hood is wrapped in realtreen camo vinyl
EF hatch window visors
OEM sunroof visor
windows tinted legal fronts and limo backs (been checked by GSP and passed)
Honda steelies painted satin black
suspension/brakes
Ebay lowering springs (rides vary good. will also have ebay coilovers)
KYB GR2 struts and shocks
stock front and rear sway bars
polyurethane radius bar mounts
polyurethane sway bar and end links
front and rear cross drilled and slotted rotors
Probably a lot more that I'm forgetting. I've been working on this car for 4 years. Will also throw in a stock d16z6 block (missing one rod and piston and crank is scared from spun bearing) and a Z6 head that needs new valve steam seals, its missing the rockers and needs a oil pressure sender for the vtec solenoid.
Willing to throw in the system for $500.
dual indash 7" touchscreen dvd/cd player
5 1/4 and 6x9 sony explode speakers
Pioneer 1200 watt slim 12" sub in black wrapped box
kicker 1000watt mono amp
The harnesses are still installed but are only for show. There bolted to the seat bolts.
battery holder is bare aluminum
Videos
http://www.youtube.com/watch?v=rloPtwUA704
http://www.youtube.com/watch?v=BEVZi_bwwBM
http://www.youtube.com/watch?v=H_Q7dtUDdF0
http://www.youtube.com/watch?v=2vI516coROo
thanks
Reply With Quote
Originally Posted by terrytowe22
