Results 1 to 24 of 24

Thread: WTT:JDM Swapped EF Si & 90 DA project car for...

Threaded View

  1. #1
    Project4wsPrelude
    Join Date
    Jun 2005
    Location
    McMinnville Tennessee. 37110
    Age
    36
    Posts
    907
    Rep Power
    21

    Default WTT:JDM Swapped EF Si & 90 DA project car for...(updated pictures and info)

    Name Sawyer Fults
    Price Trades or 5k cash for both
    Location McMinnville/Rock Island TN.
    Contact information 931-212-1722 ( Verizon Cell )

    UPDATE! Transmission is getting fixed and i'm also putting a new timing belt!

    I have decided to trade my hatch and my project integra. Here is a list of everything done to it and wrong with it along with everything that goes with my integra. It wouldnt let me load the pictures I took of it with the Rotas on it so I had to upload older pictures I had. Updated pictures coming soon

    1991 Honda Civic Hatchback SI
    Mileage 143k on chasis
    JDM B16A Swap with close to 80k on it. Very strong motor VTEC engages and pulls hard
    the transmission only goes into 2nd,3rd,4th,and 5th no reverse or 1st sometimes only 3rd and 4th after its been driven for a little while. This started two days ago and was parked right after it happened. I have an extra b16 transmission to go with it I just havent wanted to mess with it.
    Intake
    aftermarket motor mounts
    new alternator
    new plugs
    Tanai exhaust
    Number one coilovers
    front and rear top and bottom strut bars
    MUGEN rear brace
    OBD 0 to 1 conversion harness
    chipped P28 ECU ( VTEC @ 4300 9k )
    Full MSD set up ( Uninstalled )
    short shift
    SI knob
    white face gauges
    suede headliner
    drivers seat has normal wear
    aftermarket steering wheel
    integra center console
    "JDM" Yellow bumper lights
    Red and black two tone paint
    Drivers fender has dents in it all the rest of the body is straight
    Bronze rota circuit 8's

    1990 Acura Integra LS
    LS motor, mounts ( with urethane inserts ), axles, linkage, The extra b16 tranny, everything to install the swap.
    Bearings in the LS motor are bad and have some to replace it
    ran for VTEC
    carbon fiber VIS hood in great shape
    JDM 1pc headlights and tail lights
    OBD0 to q1 conversion harness
    chipped and tuned ECU ( was used on a boosted LS/VTEC motor )
    Greddy turbo timer
    interior is complete ( minus steering wheel but I have a Honda steering wheel to go back in it )
    Honda badges
    Racing seats with Netami Harnesses ( one is in passenger seat of civic and drivers seat may end up in civic as well but the Si seats are included )
    satin black paint
    drivers fender has small ding in the bottom and the front bumper has a small hole in it
    "SPOON" style mirrors
    smoked bumper lights
    all power
    WILL NOT PART OUT

    You could make the integra run with a little work or use all the suspension parts, seats etc that you wanted on the integra. The hatch runs like a trooper ( with the exception of the transmission problem ) is very strong and rides like it is on rails. Wanting to trade for a
    92-95 Civic hatch or coupe (swapped and clean )
    96-00 Civic Hatch ( SOHC or DOHC )
    DC Integra
    must be five speed...

    I understand that both these cars need some work but the hatch needs very little to look clean and drive great again and the Integra oviously is a project car but can be made clean and already have alot of extras to go with it.
    Attached Thumbnails Attached Thumbnails -phpw4be75am-jpg   -motor-jpg   -1210081300-jpg   -fender-damage-jpg   -1210081302-jpg  

    Last edited by brokecivic; 02-26-2009 at 07:35 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
ImportAtlanta is a community of gearheads and car enthusiasts. It does not matter what kind of car or bike you drive, IA is an open community for any gearhead. Whether you're looking for advice on a performance build or posting your wheels for sale, you're welcome here!
Announcement
Welcome back to ImportAtlanta. We are currently undergoing many changes, so please report any issues you encounter with the site using the 'Contact Us' button below. Thank you!