- Obx itb vacuum line help
-
Obx itb vacuum line help
First timer here when it comes to doing an itb setup. So far so good but this vacuum line stuff is confusing me.
Basically I need to get this thing together correctly an on a trailer straight to the tuner with no problems.
I have 4 ports that seem to be exactly just before the butterfly valve. What are these 4 ports for?
Secondly. Is it best to use a vacuum canister with a map on it? Or will my golden eagle suffice as a vacuum manifold?
Thirdly. Screw the ports on the itb and tap my own after the butterfly to a vacuum canister mentioned above.
I am boosting in this application so I need tps, map, and iat sensors.
Thank you so much for the help guys.
If I am wrong please shoot me straight like the gheys ain't.
Peace.
Throwing away the obx pile is not an option. Neither is burning this bucket to the ground. I have points standings for the year I need to keep up on.
-
Also.... With the itbs what is the best initial gap to set the butterfly valves to? Like placing a feeler gauge in there and locking down the linkage to index properly.
- Obx itb vacuum line help
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules