EJ2 front clip?

[Sunkenkarma]

Alright, so I bought a 95 EJ2 recently for gas saving reasons, but anyways When I bought the car I didnt notice the problem its currently having, when I got the car, it had a messed up hood on it, so I went and got a straight hood off of a same year EX coupe, and went to put the new hood on and it seemed to be too big for the rest of the front end, so I looked more into it, and it looks like the headlights, bumper and rad support etc, are slightly further back than they should be.

At first I thought the hood latch was messed up, so I got another one, still same problem. So Im thinking, is there a way to bring the front clip forward any? or are they not able to be adjusted?

Thanks for the answers guys, new to Hondas, so dont flame meh! xD

[B20B!Ithink?]

ouch. sounds like someone replaced the core support but welded it on to far towards the engine.

[Crazydelsol]

Yup it probably had a front end damage! But its easy to take the radiator support out! Check if it has the factory welds?

[Cynical 1]

could also have been wrecked and repaired once with 4-door parts - which are different.

[95droppedhatch]

rad supports are the same for all 92-95s if anything it has been in a minor accident so you need to pull it out you can do it the right way with frame machine or you can hook a chain to it on both sides around a tree and back up or hook it up to a truck and pull it out its not hard and will generally give real easy just dont rip the support off