front lug nut stud and bearing replace

[jdm eg6]

i recently bought a 95 integra and i found one of the lug nut stud broken in the front passeger side. I heared fom some friends that is best to replace the wheel bearing at the same time.. i was wonding if i would get u guys help i just need like a pictures or video that shows step by step how to do it so i can do the work my self..

thanks in advance

[Theycall_Metue]

wheel bearing dont just randomly go bad. you got to: ( there are tons of reason but most common )
1: turn like a maniac at high speed
2: lose axle nut (bolt)
3: improperly tighten rims/wheels

you will have to take the spindle pretty much off to change wheel bearing while wheel stud only need about 5 min to replace.

[wanggsticky]

easy shit.

[xero_xero]

you can do this your self. it doesnt need to be pressed in, atleast in the sence that you seee. you can do ball joints as well. impact tools make it easier but not necessary.
\

sounds like a loose wheel as far as the bearing AND stud.

[a94civicex]

youtube

[jdm eg6]

thanks for the help guys reppss

[blown_ss]

the bearing has to be pressed. i just had one done saturday.