Please help. HID kit issues

[X-Runner]

I have a 2005 F-150 and installed a bi xenon H13 kit. The control harness that was included only feeds power off the passenger side headlamp plug and powers both ballast that way and leaves the drivers side plug open. Now, the problem I am having is the high beam indicator is always glowing and when switching to high or low beam, they do not work. Now, if I install a halogen bulb on the empty plug my high/low works, but its backwards! Low position is high and high is low. I also tried just wiring in a bulb (3157) on the high beam wire and ground on the open plug and get the same issue. How do I fix this? No one seems to know. Thanks for any help.

[Raymond]

get a low resistor and plug into the empty socket. That should take care the problem. It needs current for the empty plug with your car.

[X-Runner]

Thank you. And I should be clear, I did not get the kit from Raymond. I got it else where which I will not be doing business with again due to a lot of problems.

[Raymond]

Cool!