I have a 2005 F-150 and installed a bi xenon H13 kit. The control harness that was included only feeds power off the passenger side headlamp plug and powers both ballast that way and leaves the drivers side plug open. Now, the problem I am having is the high beam indicator is always glowing and when switching to high or low beam, they do not work. Now, if I install a halogen bulb on the empty plug my high/low works, but its backwards! Low position is high and high is low. I also tried just wiring in a bulb (3157) on the high beam wire and ground on the open plug and get the same issue. How do I fix this? No one seems to know. Thanks for any help.