I know you want to have a European Look on you car.
IA Member only $13.99 Sales is over now $18.00
JDM Smoke Tint Spray Paint -- 80ml
100% Authentic & Made in Japan
* This spray is designed for your headlights, tail lights, corner lights or fog lights
* Made-in-Japan
Direction: show you how to smoke your head lights or tail.. ( found this from the net)
Tools Needed:
8mm Deep Socket
Phillips head screw driver
Flat head screw driver
Heat Gun (optional)
Gloves for hot oven
needle nose Pliers
Hammer would not hurt to have
Knife or prying tool
1.Remove tails
2.Preheat oven @ 350
3.stick them in for about 10 mins(you can use a heat gun but is is really long and you could damage the lens while trying to take them apart do to the glue recuring on one side.
4.Take them out and pry them evenly until they come apart.
5.leave the artcylic glue on there for putting them back together later on.
6.Take off the Amber plastic piece laying inside the lens.
7.Buy some black plastic spray paint.
8.Paint the lens inside.
9.go in reverse order to put back together including putting them in the oven again to reheat the glue or use a heat gun.