how long should it take to pull and drop in a d series?
some weird shit happened last night to my engine so im just going ahead and dropping in my other D. How long should his take? ive heard 3 hours and ive heard two days lol.
Also is there any technique to do it quickly but correctly?
i want to try to finish it tonight by 9
thanks
FUCK B&D COMMUNICATIONS!
let me know if you need any help
well its easier and faster for me to pull the whole swap and disassemble it outside of the car and reassemle and put it back in....each his own
yea about 2-3hrs
shouldnt take you 2 days thats for sure . LOL
but droping it in shouldnt take that long i say a good 6-8 hrs
if its your first time,
Unless your not mech incline. then ya not 2 days but 2 weeks .
the easiest way i done it is leaving the hareness on the engine just unplugging the sub hareness. then when the motor is out transfer it over other then that
cool cool yeah both engines are complete and im doing it at my friends shop so ive got help and all the tools.
thanks for the offer bucky, ill let you know if we need a hand cause i dont know whos all working today but should be 3 people on it
FUCK B&D COMMUNICATIONS!
Originally Posted by b18hatch
at a shop dayumm then even fasten then expected with a lift just drop the engine
Its like 20 or so connections if you have ac and everything then just like 6 bolts.
if you're doin it at a shop with air tools, then no more than 3 hours considering you'll have a lift. Its pretty damn easy man, my homie just finish his d swap in about that time frame in his garage though. As long as you know what to do then there should be no delays. Take the axles out, shift linkage, and mounts is all there is too it, a basic socket set will accomplish all these. Just make sure you change the water pump and timing belt before swapping a new motor in.
3-5 hours tops if you have a complete motorset sitting outside the car
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
Ive watched my friends dad pull one out in 2 hours.
2005 Suzuki GSX-R 750
ill pull one out in about 1 hr +/- a few minutes
depends on howmany people ther is to bullshit with
haha yea its always good to add extra time for bullshitting
Land Rover LR3 HSE
me and my friend can pull one in about an hour and a half if we just jump in. we always unplug everything first, and pull it out.
charles can do it in 45min
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
.
ive bet him money before an lost cause he did it in 45min.
I swapped my tranny in my 2.0l CRX in 33minutes
Enterprise Data Resources- Ecommerce Project Manager
-www.usedbarcode.net
so gotta beat charles to get a job at mspI.
and 33 mins on a trans i cant even touch !!!!!
shit it took me 7 hrs to do a clutch job on a subaru HAHAH! longer then needed for the first time. damn pins were rusted like a
Depends on how many times you've done it. If it's your first, schedule for 6 hours.. I'm not lying.
I've done more than i could ever count, the last one i did was with air tools and a lift, me and Silversol timed ourselves. Start to finish (starting to leaving the shop) we did it in 1hr 10mins.
where the hell is silversol? haven't seen/heard from him in a while. I wonder how his whip is runnin now.
yes it takes about 1-2 hours to pull and about another 1-2 hours to put back in
wow you guys know how to race at just about anything lol.
Posting Permissions
Reply With Quote
