Smoke coming from PCV misfiring from 1&3

[twinj]

Ok I did the whole tune up. Replace Distributor Cap, Rotor Button, Wires, Plugs. Now i have Smoke comming out of the Pcv valve(small filter) and misfiring from cylinders 1&3 at idle if i raise the rpm can't tell its misfiring. I was wondering could it be the Timing,or headgasket. If anyone knows what the problem is i would appreciate the help. I could use any information.

B18b swap
5lbs Boost(fmu,stock,injectors,Safc tuned)

[Vteckidd]

sounds like blow by. do a compression test. replace the PCV valve

[twinj]

Thanks Mike, Where could i find a place to do?

[Vteckidd]

is it coming from the BLACK BREATHER BOX, or the valve cover?

if its coming from the valve cover, then soundsl ike you have crushed ringlands

[twinj]

coming from the valve cover. How much is it to replace ringlands

[Vteckidd]

that USUALLY means the pistons are done.

You need to do a compression test, we charge $40 to do one