hey everyone im trying to help my buddy on an LS swap on a 97 civic dx obd2 we have everything in the car even dough the wiring harness is giving a little trouble we are trying to work with it the swaps condition right now is no cv axles the altenator is not plug in the engine and tranny are attached and the clutch slave is on the intake mani.but no filter no exhaust mani. at all the only thing that is getting me and this is the QUESTION when we turn the key so that the engine can start it turns over but no start and it also smells like gas as soon as we turn the ignition on all the grounds are connected i unplugged one of the spark plug wire to the engine while the engine is turning over to see if there is a spark but no electric shock i even went as far as taking the spark plug out and connecting it directly to the SP wire while the engine turns over to see if it would spark but no luck most of the wiring harness is in is there any particular sensor i should know about that might cause the dizzy not to work
![]()