Ls swap in ek help...

[BlackEj6]

I have a 95 Ls Motor(B18B1).I will be puttin this motor in my 97 Civic Coupe dx non-vtec(OBD2)Can some one let me know what type of dizzy to get and all of the other parts i need.ECU,Altenator,Intake Mani..I heard i cand just get an OBD2 -0BD1 conversion harness and save alot of time and money..Let me know IA..

[Dirty Octopus™]

if your using your old harness just get an OBD2 Dizzy and Alternator (i believe you should be fine with that IM, if by chance you need an OBD2 IM though i got one i can trade you for.) and use an OBD2 ECU and you should be good to go.

[SLow_POke]

I have a 95 Ls Motor(B18B1).I will be puttin this motor in my 97 Civic Coupe dx non-vtec(OBD2)Can some one let me know what type of dizzy to get and all of the other parts i need.ECU,Altenator,Intake Mani..I heard i cand just get an OBD2 -0BD1 conversion harness and save alot of time and money..Let me know IA..

00 Civic Si Rear mount,

might need some wiring harness modification(extending )?

convertion harnes OBD2-> OBD1


-Ernie


BTW do u have the complete hareness with it ? including sub harness?

[BlackEj6]

00 Civic Si Rear mount,

might need some wiring harness modification(extending )?

convertion harnes OBD2-> OBD1


-Ernie


BTW do u have the complete hareness with it ? including sub harness?

Ill find out.Whats the Sub Harness?

[SLow_POke]

Ill find out.Whats the Sub Harness?

the half of the harness that connects THE MAIN ENGINE harness to the ecu located on the passenger strut tower enginebay goes thru firewall to connect to the ecu , but it cool if you dont have it

i also forgot to mention the motor mounts for the swap
-Ernie

[typerek]

si mounts, obd1 conversion, integra harness, integra dizzy.