Swaps with Intake

[93dituneex]

When you do a engine swap, like I'm bout done putting a B16a in my 93 civic ex, what intake do I use on it. Would my old intake off my d16z6 work or what?

[B16a2 Civic]

no.

why you ask??

When you do a engine swap, like I'm bout done putting a B16a in my 93 civic ex, what intake do I use on it. Would my old intake off my d16z6 work or what?

[93dituneex]

Why do folks usually ask? Cause they don't know right? Yea well I didn't know obviously so I asked. Don't come on my thread being an ass, just answer the question or don't, not that hard. Thanks.

Anywayz, which intake do I have to buy for it or do I have to have one custom made?

[B16a2 Civic]

Why do folks usually ask? Cause they don't know right? Yea well I didn't know obviously so I asked. Don't come on my thread being an ass, just answer the question or don't, not that hard. Thanks.

Anywayz, which intake do I have to buy for it or do I have to have one custom made?

im pointing out teh obvious, which i answered, if you dont like the way i answered then dont read the damn thang...
hmm...which intake do you buy for a b16a...how about....a b series intake....cause you know when you buy an intake, on teh box it says what its for....so if you see " for b series" or " for b16 " ...then thats what you use.

[speedminded]

b16 or b18c5 (itr) will will work.

[93dituneex]

im pointing out teh obvious, which i answered, if you dont like the way i answered then dont read the damn thang...
hmm...which intake do you buy for a b16a...how about....a b series intake....cause you know when you buy an intake, on teh box it says what its for....so if you see " for b series" or " for b16 " ...then thats what you use.

did it ever occur to you the route of the b16 may not be the same as in my car? yea if i buy a b16 it will hook up the engine right duh, but the route may not be the same so it might not exit the engine bay the same.......thats why I asked, i'm not an idiot, but thanks for your help anywayz

so an intake from either a b16 or a b18c5 will have the right fitment and route correct?

[speedminded]

so an intake from either a b16 or a b18c5 will have the right fitment and route correct?

can't guarantee that but it's the only one that will fit the head so it doesn't really matter. Wait a minute....intake as in just an intake, not an intake manifold? If that's the case then just throw anything on there...dryer hose and a sock, it doesn't matter...naw...just use a regular short ram....you're not planning to go to an oem box and filter are you?

[93dituneex]

nah I have the cold air intake i had on my d16 and I was wondering if at all possible I could use that on my b16, i didn't think so because of the throttle body sizes but was wondering anywayz

[B16a2 Civic]

see, you never asked will fitment be a problem, you asked what intake do you use, and i as well as speedminded informed you what intakes will work...but to answer your question, no your d series intake will not work on a b series motor, and if you think fitment will be an issue, get a short ram, you will have no fitment issues.

[speedminded]

nah I have the cold air intake i had on my d16 and I was wondering if at all possible I could use that on my b16, i didn't think so because of the throttle body sizes but was wondering anywayz

it probably won't fit but you can always make a little conversion/connector piece using a 6" long piece of hose that will fit over both the throttle body and your d16 intake.

[93dituneex]

well i got my car back and tried to ghetto fit my intake on but it wouldn't stay on so i guess i need to grab a short ram or stock one asap.....thanks for the help guys and sorry b16 for getting an attitude i was out of line..