Budget Turbo Build F22B Honda Accord
Ok IA, a friend of mines wants to do a budget build on his accord.
He only wants to run about 8-9 psi so he wont have to upgrade his internals until he gets done with college. So anybody have knowledge of parts needed, or have done it before.
He drives a 4 door 1995 Honda accord with a 1996 ex motor
any help is appreciated and reppped
Links, personal experience, etc is accepted
nobody
its just like building any other turbo. rebuild the motor so it doesn't think about blowing something when you boost it. running 7-9 psi shouldnt be a problem on stock internals but dont forget to get the car tuned.
heres mainly what you'll need-
1. rebuild kit (come with replace gaskets/rings/rod/piston)
2. turbo manifold (since its not a sports car you may need a custom made turbo manifold)
stock internal rebuild shouldn't run too much, ex: b18b1 rebuild kit is 300-400 $$
oh yeah, this build on 8-9 psi shouldn't run him more than 2k
rebuild kit = 400 max
getting it machined is about 200-300 $$
turbo manifold = not sure, around 500??
turbo kit = 400-500 go with ebay turbo kit, they not bad with low boost, other kit if you dont like ebay.
i have not build a turbo project yet but just giving you something to start with using my knowledge. my b18b1 turbo build will be done within next few months
turbo kit and a good tune...The End
NO ADVERTISING
-IA MANAGEMENT
Things i think i need:
Turbo manifold
T3/t4 turbo
Oil feed and return lines
Manual Boost Controller
Intake piping with BOV
FMIC or SMIC
Downpipe for turbo
low boost so he wont need a new ecu or safc
wat else????
all that will come in a turbo kitOriginally Posted by SRK420a
just make sure you have both oil line if you buy a ebay turbo kit
yea i told him thatall that will come in a turbo kit
just make sure you have both oil line if you buy a ebay turbo kit
thats your idea of a budget build lol wow
Nice prices still kool guy though
He is trying to spend under a grand, even if its $999 he made a bet that he can do it for 1000 or less
where is there a kit with a manifold, turbo and intercooler and the other essential parts for $500?????
just checked lol try more along the lines of $850.00
Anywhere else lol
do you know anybody who sells a mani for it
piece one together and make your own fmic piping to save a few $$$
chuck-norris-a-souris
I doubt he knows how to
whatever you do dont cheap out on the tune, and the ecu u can get a chipped p28 for like 150
do you guys have experience boosting cars or is this your first time???
Drummerboy has the same engine in his prelude i think. Which is boosted, so your best bet contact him.
:idb:
i bought mine for 500 shipped and upgraded to turbonetics manifold ... cost me around 800 bones... and if the motor is under 130,000 miles on low boost you shouldnt need a rebuild unless motor has fucked up compression to begin with!!!! but if motor is REALLY high miles do rebuild before you apply boost and he should be safe up to 10 psi with a great tune ...just checked lol try more along the lines of $850.00
Anywhere else lol
93 sol Si
95 sol S
95 sol Si
drummerboy has a f22a1
this is his first time building a boosted car but my crew has alot of experience with boosted cars
the motor was rebuilt before he bought it and its only got 4000 miles on it now
500whp of spinnin fury!!!
Definately will need something as the stock ecu is not calibrated for boost.
JJSPEC RACING - Central Ga's source for performance parts,fabrication, tuning, general repair and a whole lot more! 478 621 5000
uh oh....
NO ADVERTISING
-IA MANAGEMENT
that is what he said not me lol
same thing, the only difference is the head thus the exhaust mani is different, the a1 is better tell you the truth, you would maybe need some bigger injectors, i think some people go with legend injectors or dsm injectors??? look on cb7tuners.com or even ht, or honda society, there is a bunch of info on this type of build out there, my friend had that same engine boosted with stock internals in his 97 accord ex for a while, no problems, we even took out the engine and sold it afterwards, it still ran fine,
thanks alot man reps
don't even think about turboing if you are going to cheap out on the engine management or tuning. you will certainly blow it up.
chipped ecu are less than $200. if you have a p28 it's less than $100.
MAINSTREAM PERFORMANCE & DIGITAL BOX TUNING
ECU CHIPPING/SOCKETING/TUNING-HONDATA, CROME, BRE, TURBOEDIT
HONDATA DEALER/TUNER
NISSAN REALTIME-NISTUNE
MITSUBISHI AND SUBARU TUNING AVAILABLE!
i already told him that, hopefully he get the point that he cant do it with out a tunable ecu
F series engines are very strong. can easily hold 6-8psi, if motors in good condition to start with.you can get an 'ebay' turbo kit for a starting kit for that price..
But if you buy cheap stuff its gonna cost more later when you want it bigger and better..I learned my lesson.my 1st kit i built was 1500$,not including custom DP,waste gate tube,etc.
Im just now going back and re-building a new kit..engine management alone this time was 1500$ EMS.
my friend jayro thanks you
Im boosting my f22b2 with 205,xxx miles on i
It doesnt smoke at all. If the compression check is fine then i should be ok to boost it on low boost. correct?
Posting Permissions
Reply With Quote
