F22 ?

[blue92gts]

Thinking about building my engine, but don't know anything about hondas, as fas as where to get parts and such. i have al the tools i'd need, and i will turn all the wrenches. can you guys point me to where a good place to get some parts like crank, rods and pistons? its got 214k on it and has got a bottom end rattle now, with some leaks, so i figure its time for a re-build.

looking to do a na set-up with possible turbo later on. what would you guys do? and are these motors worth building? how would you guys set it up? keep in mind this is going in a accord wagon and has an auto in it, so i don't think i can go too crazy. any help or ideas will be appreciated. thanks in advance

[Franco Tirador]

there is a guy out there named bisi, with bisimoto search him, as far as parts i would go either oem honda or a good aftermarket, try some accord forums, they are full of posts about f22s

[JoshM]

As already stated, Bisimoto is the best place to go for all your F22x needs.


Bisi himself has a 400+hp N/A F22. It's VERY built, but it does show it's capabilities.
Many people on CB7Tuner have turboed F22's putting down 250+hp, on mostly stock internals.

Here's just a few examples of turboed F22's:
474whp/380wtq T66 @24psi F22a
402whp/250wtq Holset@ 20psi F22a
357whp/350wtq @19psi F22a
339whp/328wtq GT30R@19psi F22a

Here's a pretty basic DIY turbo for an F22:
http://home.comcast.net/~ndd3d/TurboInstall.pdf

[blue92gts]

thanks guys