dust

[gar9854]

is there some sort of a trick to getting dust out of my oil and water jackets in my block( the head has been off and i had to lightly sand the old HG material off the block)

key board duster and pipe cleaners as a start then just fill the motor up w/ oil and coolant then let it run for a little while and flush the coolant and do an oil change?

[dallasb84]

the trick is to stuff some shop towel in the oil drain..... but the water jacket..... not really a issue other than maybe clogging up your heater core

[Tech5]

I have a Vaccumn bleeder for brakes and I use this with air line and it sucks everything up!!!!!

[Tech5]

the trick is to stuff some shop towel in the oil drain..... but the water jacket..... not really a issue other than maybe clogging up your heater core

Or thermostat, or lines, or throttle body, or water jackets or heater core

[gar9854]

I have a Vaccumn bleeder for brakes and I use this with air line and it sucks everything up!!!!!

Well I sure don't
do u think barefoot has one?
If not can I get a little help$

[Tech5]

Well I sure don't
do u think barefoot has one?
If not can I get a little help$

You can get them online for around 40-60 bucks
SNAP on is about 250 for the one I have....

BAREFOOT I doubt it ..

[gar9854]

You can get them online for around 40-60 bucks
SNAP on is about 250 for the one I have....

BAREFOOT I doubt it ..

nah he doesnt have one but i borrowed a neighbor shopvac and just rigged in a McDonalds straw and im keeping my fingers crossed.

but once its all put back together im gonna let it get to a full warm up and wait about 30 minutes then do a oil change and complete flush

[Drummerboy]

nah he doesnt have one but i borrowed a neighbor shopvac and just rigged in a McDonalds straw and im keeping my fingers crossed.

but once its all put back together im gonna let it get to a full warm up and wait about 30 minutes then do a oil change and complete flush

hahaha brilliant!

[gar9854]

hahaha brilliant!

lol
is this jordan rees?

[Barefoot]

nah he doesnt have one but i borrowed a neighbor shopvac and just rigged in a McDonalds straw and im keeping my fingers crossed.

but once its all put back together im gonna let it get to a full warm up and wait about 30 minutes then do a oil change and complete flush

lol i have 1. i wasnt sure what the hell u was talking about in the text. now i see this post. i got 1.

[gar9854]

lol i have 1. i wasnt sure what the hell u was talking about in the text. now i see this post. i got 1.

Yes I'm already done and I puttin in the arp studs once I get home

good lookin out tho