my head are clicking

[Austin?]

so i blew a head gasket on my 97 integra( B18b1) it was smoking pretty bad and dripping water out from the tail pipe.

i buy a new head gasket and replace a new one.
i tight it up all bolt 15LB then 35LB then 45LB

everything seen to go very smooth ..

after all part and cover is back on. i try to start the engine, it making a very load clicking nosie.
the nosie seem like it coming from the spring.

anyone encounter with this problem before and know how to fix it??

__________________________________________________ __________________________________________________ ________________________________________--
okay, Let me start over...i had change a new head gasket and reinstalled everything, and last night i had retight the headbolt to 61lb..... when i try to start the engine i can hear it TRYING (key word) to start but it dont turn on.. yall know what im talking about right?

and i readjust the valve to .017 on the intake side and .020 on the exhaust side. the clicking are gone now after i did that.

BUT I CAN'T GET THE ENGINE TO TURN ON YOU THNK IT SOME GROUNDI THEN ADDED AN EXTRA GROUND TO THE VALVE COVER AND IT STILL DONT RUN.

IT SOUND LIKE IM OUT OF GAS. CAN ANY BODY HELP ME WIT THIS?

no im not trying to get post count

[Austin?]

plus, the engine didn't turn over.

[PRO®]

valve adjustment perhaps...?

[Barefoot]

valve adjustment perhaps...?

yah thats what im thinking.

plus, the engine didn't turn over.

didnt see that what u mean it didnt turn over when

[Austin?]

how is that done?

[Austin?]

so i should loose it right>?

[Austin?]

dose anybody have a FILLER GAUGE for valve adjustment??? i like to borrow.

please some body help me dude out

[Barefoot]

edit: ill repost that things start making some sense.

[Barefoot]

also 1 other thing i just noticed your head bolts should have been tq to 61 ft. lbs.

[D3UC3S]

yea i was gonna say that u were a little light on those head stud tq's.

Try tightening to 61 ft lbs then adjust the valves

[D3UC3S]

after all part and cover is back on. i try to start the engine, it making a very load clicking nosie.
the nosie seem like it coming from the spring.

anyone encounter with this problem before and know how to fix it??

from what you said here it sounds alot like the starter clicking. If it didnt turn over then you would have never heard your valves.

[PRO®]

from what you said here it sounds alot like the starter clicking. If it didnt turn over then you would have never heard your valves.

^you've got a point, lol.

[hondalover00]

i would check all ground connections and the starter for binding also check the sloenoid on the starter

[Barefoot]

hold on hold on let take a few steps back here get a few things clear. what your saying isnt making since. u said its clicking from the spring but then u said it will not start.

i tight it up all bolt 15LB then 35LB then 45LB

that needs to be 61lbs

after all part and cover is back on. i try to start the engine, it making a very load clicking nosie.

did the car ever start. where was the clicking noise coming from. location or region of the motor.

[MidLifeCrisis]

this thread is all fail.

i bet the lifters are binding on the tops of the valves.

[Barefoot]

this thread is all fail.

i bet the lifters are binding on the tops of the valves.

i dont have a clue anymore there is a lot double negatives in the OP.

[D3UC3S]

i bet the motor didnt even start.....just heard the loud clicking from the starter..dude should have had help before starting this project

[Barefoot]

i bet the motor didnt even start.....just heard the loud clicking from the starter..dude should have had help before starting this project

if everybody who posted in this section thought like that id have like a post count of 100.

[D3UC3S]

if everybody who posted in this section thought like that id have like a post count of 100.

OMG!!LOLOLOLOLOL...awesome

[EmminoDaGreat]

holy shit....

New requirement for general tech section.... Please learn how to for sentences.

[J-ROCK]

please tell me you replaced your head bolts cause you know they are stretch bolts which equal 1 time use!

[Austin?]

please tell me you replaced your head bolts cause you know they are stretch bolts which equal 1 time use!

no i didn't change new bolt

[MidLifeCrisis]

please tell me you replaced your head bolts cause you know they are stretch bolts which equal 1 time use!

take that useless info elsewhere. ive done 100+ honda head gaskets, and reused every set of headbolts, and guess what? not one problem. this is where mechanics and internet specialists seperate.

[Barefoot]

internet specialists seperate.

whats that

[MidLifeCrisis]

whats that

people that actually work on cars for a living, and the few random IA users who pop in with useless myths to throw into the mix, the general tech area should be the area where the 2 seperate and the random crap goes somewhere else.

[Barefoot]

people that actually work on cars for a living, and the few random IA users who pop in with useless myths to throw into the mix, the general tech area should be the area where the 2 seperate and the random crap goes somewhere else.

agree

[Ghostface]

take that useless info elsewhere. ive done 100+ honda head gaskets, and reused every set of headbolts, and guess what? not one problem. this is where mechanics and internet specialists seperate.

yeah thats what I thought!

[Ghostface]

please tell me you replaced your head bolts cause you know they are stretch bolts which equal 1 time use!

Don't know if anybody wrote on this but I thought head bolts are reusable..I always thought that when the motor over heats that's when it messes with the bolts or something like that...could be wrong, correct me if i'm wrong.

[j0nbunklah0m]

lol he wants help, then he better get in esol

[Austin?]

lol he wants help, then he better get in esol

hahahaha you're a fucking funny guy!!

[J-ROCK]

shit he needs to read up on what hes doin before he starts will save him alot of headache!

[hmong_Spec]

maybe his own head is clicking.

[Austin?]

okay, Let me start over...i had change a new head gasket and reinstalled everything, and last night i had retight the headbolt to 61lb..... when i try to start the engine i can hear it TRYING (key word) to start but it dont turn on.. yall know what im talking about right?

and i readjust the valve to .017 on the intake side and .020 on the exhaust side. the clicking are gone now after i did that.

BUT I CAN'T GET THE ENGINE TO TURN ON YOU THNK IT SOME GROUNDI THEN ADDED AN EXTRA GROUND TO THE VALVE COVER AND IT STILL DONT RUN.

IT SOUND LIKE IM OUT OF GAS. CAN ANY BODY HELP ME WIT THIS?

no im not trying to get post count

[D3UC3S]

okay, Let me start over...i had change a new head gasket and reinstalled everything, and last night i had retight the headbolt to 61lb..... when i try to start the engine i can hear it TRYING (key word) to start but it dont turn on.. yall know what im talking about right?

and i readjust the valve to .017 on the intake side and .020 on the exhaust side. the clicking are gone now after i did that.

BUT I CAN'T GET THE ENGINE TO TURN ON YOU THNK IT SOME GROUNDI THEN ADDED AN EXTRA GROUND TO THE VALVE COVER AND IT STILL DONT RUN.

IT SOUND LIKE IM OUT OF GAS. CAN ANY BODY HELP ME WIT THIS?

no im not trying to get post count

First...ur valve adjustments are WAY out
second.. an extra ground to your VC isn't going to change a thing
third...have you tried jumping the car?
Fourth...we dont care about your post count as long as we can read it and understand it

[Austin?]

First...ur valve adjustments are WAY out

this dude on youtube doing it on on his so i go with it.. IT STOP THE CLICKING
http://www.youtube.com/watch?v=bVLNJ3PWrPM

second.. an extra ground to your VC isn't going to change a thing

There was a ground on the VC before so i try it on another location...
it don't hurt to try

third...have you tried jumping the car?

No not yet.. i live on a hill and it going to be a bitch to get it back up there if the car don't start.

Fourth...we dont care about your post count as long as we can read it and understand it

thanks for your concern

[D3UC3S]

this dude on youtube doing it on on his so i go with it.. IT STOP THE CLICKING
http://www.youtube.com/watch?v=bVLNJ3PWrPM



There was a ground on the VC before so i try it on another location...
it don't hurt to try



No not yet.. i live on a hill and it going to be a bitch to get it back up there if the car don't start.



thanks for your concern

G/l man...i wasnt trying to be a dick or nothin...the reason you don't hear clicking anymore is b/c the clearance on your valves is so big now, they don't even get close...it should be like .008 and .011...u are almost double that. Don't go by what some random on youtube is doin...go by what Honda says

[Austin?]

G/l man...i wasnt trying to be a dick or nothin...the reason you don't hear clicking anymore is b/c the clearance on your valves is so big now, they don't even get close...it should be like .008 and .011...u are almost double that. Don't go by what some random on youtube is doin...go by what Honda says

okay, will do that tonite,
but what i really want to know is why my car dont start and fix it..
i think i might get Barefoot to help me out if i cant get it rolling

[hmong_Spec]

your dizzy?

[Austin?]

your dizzy?

it was working fine before i change it...
i'll going my try putting my brother gsr dizzy on later just to see if it run..

any one else got any other idea?

[hmong_Spec]

well, i swapped my motor, and the dizzzy was fine b4 i swapped it. put it my new motor. and my dizzy didnt work. itll runs out when it wants to run out.

it was working fine before i change it...
i'll going my try putting my brother gsr dizzy on later just to see if it run..

any one else got any other idea?