my brother integra gauge for the temp. is not working. any idea. its a 1993 integra.
gauges
my brother integra gauge for the temp. is not working. any idea. its a 1993 integra.
very rarely is it actually the gauge more than likely it the coolant temp sensor or a wire.
Try not. Do or Do not.
where;s the sensor located at.
Originally Posted by eraser4g63
Not a clue i know jack shit about Hondas. but typically speaking near the thermostat. or on the side of the block.
Try not. Do or Do not.
It's down to the right from the dizzy a littlt near thermostat
See there ya go, I was close.
Try not. Do or Do not.
haha thanks. so its most likely that sensor?
i mean like the gauge temp. it doesnt move at all.
99% of the time yes. And chances are if it has not been replaced it needs to be, they are also fairly cheap. If it is not that it is going to be a wire issue.
Try not. Do or Do not.
Wire going to the sensor is pulled off easy check for it
aigh guys, will check when i get home. thanks. REPPED
Posting Permissions
Reply With Quote