obd0 to obd1 Distributor Conversion

[southside]

Well I have been looking for right ups and have found many but most are for ls harnesses or si civic harnesses.Which use seven plug connectors, well my car has two plugs for the dizzy on the obd0 side and of course the plug with the two wires was easy.But the other obd0 plug has five wires white,white,white/wblue stripe,Beige or orange,and Beige or orange/w blue stripe.My question is what wires do I match to the obd1 dizzy side plug which has 7 pins .And they are beige or orange/wblue stripe,Bluew/yellow stripe,bluew/green stripe,white,Whitew/blue strip,bluew/green stripe,Orange and yelloww/green stripe. I know alot of people will say just buy one from boomslang or ebay but I dont trust ebay shit and dont wanna pay for ecu conversion and dizzy combo that they sell and not just dizzy converison alone.

REPs for Useful Info because need me car running asap and only shit holding me back.

[Barefoot]

dont know what happened to his price but it used to be $30.

http://rywire.com/store/obd0-obd1-di...44b4759b39f764

[punkr6]

dont know what happened to his price but it used to be $30.

http://rywire.com/store/obd0-obd1-di...44b4759b39f764

i'm co-signing on this one, rywire is good stuff and great customer service...

[southside]

dont know what happened to his price but it used to be $30.

http://rywire.com/store/obd0-obd1-di...44b4759b39f764

I hit up Ryan and he told me only way it could be purchased was with the ecu conversion kit that was 160$ and came with the dizzy conversion.That was the first place I looked to purchase one from.

[Barefoot]

thats gay as hell

[Formally...]

So I am assuming you are going to use a OBD0-OBD1 conversion harness at the ecu. Do you already have the conversion harness? Have you already done the DPFI to MPFI conversion?

Anyways the blue/green strip and blue/yellow strip are the wires that you will have to run from the ecu to the dizzy. The DPFI does not use this sensor. The other wires just match up color for color and the large white wire on OBDO goes to the yel/green stripe wire.

[southside]

So I am assuming you are going to use a OBD0-OBD1 conversion harness at the ecu. Do you already have the conversion harness? Have you already done the DPFI to MPFI conversion?

Anyways the blue/green strip and blue/yellow strip are the wires that you will have to run from the ecu to the dizzy. The DPFI does not use this sensor. The other wires just match up color for color and the large white wire on OBDO goes to the yel/green stripe wire.

Yea I figured those two ran to the ecu but wasnt sure and yes I already did Mpfi conversion with the engine harness and I have the ecu jumper already in. Reps+