Well I was thinking if I have a B18C1 block and mate it with a first gen B16A head, will it be OBD0?
Poor Man's OBD
Well I was thinking if I have a B18C1 block and mate it with a first gen B16A head, will it be OBD0?
you can make it what ever obd u want. doesnt matter the block or head.
I thought OBD came with the dizzy, intake
Theres so much more to this than the dizzy. What car are you trying to put it into?
89 crx
Best bet with 89 crx is to convert to obd1.
Originally Posted by green91
on the egine side get everything obd0 for the car. then a jumper harness and a chipped/socketed p28
the obd is a combo of the engine electrical components and ecu.
well if i convert to any obd then it would be two and then i would just get a full gsr but how would obd1 work
send me a pm. u have a lot of homework to do.
x222222222222
doing work
the answer is yes/
shh he might find out
sry buddy the answer is no. there is more to obd than just a head.
what all makes something OBD
dizzy, harness, alt, injectors, ecu, crank postion sensor (obd2 or the trick). there are a few other odds and ends but for the most part those are your main pieces.
well what if I have a full obd0 b16a motor but a gsr tranny from a b18c1 thats obd0. I really just want the tranny but thought since i have the traany why not the block
b18 handle boost better than b16 right
gsr tranny will not work in your crx unless u get a hydro to cable conversion kit. like this
http://hasport.com/shop/product_info...roducts_id=179. if not u will have to get a cable tranny.
no replacement for displacement.
well then it will work a gsr tranny and b16a and it will be obd0
what
I can use he GSR tranny and a b16a and not convert to obd1 hmm two choices
Threads like this make me want to smack myself. I think I am going to start a FAQ thread in the DIY section... jesssus...
The EMPIRE
please do
You can assist too..
The EMPIRE
LOL at this thread
let me know what you need. ill be more than happy to help.
Posting Permissions
Reply With Quote
