DOHC ZC in a 4door EF

[JdM_EJ2]

i wana drop in a ZC in a 4door ef what xactly do i need to do this swap...do i realy have to get the rywire shiet or is there another way to add them 2 injectors? preciate it if yall can help me out what this i dont kno shiet bout OBD0

oh and is the japanese ZC off a 91 crx Si

if yall got anything that i need for this swap that yall sellin hit me up 404 925 9130 txt is the best way to contect me preciate it

[BlazinBubble]

i had a dohc zc in my 91 ef hatch but thats the way i got it..uhmm it should just b a plug a play except for the injector wiring..nd i have a ton of left over harness thats still in great shape wen i did my swap nd i still have the motor if interested as a parts motor just in case suttin happens to the one u have..

[JdM_EJ2]

wat kind of hatch was it? si? dx?

[BlazinBubble]

SI..im tryin to sell the motor and all the left over wiring for cheap if your interested

[JdM_EJ2]

oh cause from what ive heard the si harness wont plug in with the cars main lx harness but im not sure ....do you have the dizzy?

[BlazinBubble]

the ZC dizzy i do have..

[punkr6]

you can convert your harness to multi port ( 4 injectors ) pretty easy. There is a million threads on this-google duel port to multi port conversion

[JdM_EJ2]

are you gona sell it

[JdM_EJ2]

i can convert it with out getin that rywire harness??

[BlazinBubble]

im tryin to sell the whole thing like i told u before i only want $200 for everything..

[JdM_EJ2]

200 for the longblock?or full swap?is ther anytthing wrong with it

[BlazinBubble]

yeh long block wit no tranny it has a rod walk..easy fix i just dont have the time or patience to do it.. i pulled it b4 it got bad

[JdM_EJ2]

oooh ok cause all i really need is the dizzy...if u decide to part it out let me kno so i can cop the dizzy

[BlazinBubble]

y dont u just buy the whole motor and use it as parts if anything goes bad wit the one yur gonna swap?? 200 bucks is cheap and it runs all u have to do is take the bottom end off and replace the pin on the rod and yur good to go..

[JdM_EJ2]

man if i had 200 to spare trust me i would get it and buy a shell for it but i got bills to pay you kno...just let me kno if u decide to part out

[BlazinBubble]

how about 160?? my final offer ill even bring it to yur crib!!

[JdM_EJ2]

lol damn you killin me...ill let you kno 2moro...do you got a cell cause i aint gona b near a computer till the weekend probaly

cell or email works best for me

[BlazinBubble]

i sent u a pm!!

[preferredduck]

oh cause from what ive heard the si harness wont plug in with the cars main lx harness but im not sure ....do you have the dizzy?

ypu are correct a SI harness will not be plug and play. you can go to rywire or find a good write up and do it yourself. you can use parts off the SI harness. you need the injector resistor box for sure, which i may have a couple of those. you need the injector clips and a little wire from the mpfi obd-0 civic/acura. i'm gonna convert my hatch to mpfi one day but have researched it before.

[preferredduck]

yeh long block wit no tranny it has a rod walk..easy fix i just dont have the time or patience to do it.. i pulled it b4 it got bad

$200 for a spun rod motor, check the cranfshaft first, if not you may need other parts that may be hard to find.